Sensors Dealers in Shivane, Pune

• Accuracy: : +/-2% of Full Scale Deflection
• FLOW-RATE RANGE: : 60 To 450 LPH Depending upon Nozzle Diameter
• INLET-OUTLET SIZE: : 1/4" BSP Female.
• INPUT VOLTAGE: : 12-24VDC
• OUTPUT VOLTAGE: : Square wave of 12-24V
• OPERATING TEMP.: : 50oC
• OPERATING PRESSURE: : 3.5 bar
• HOUSING: : S.S.
• PADDLE: : PP

LP-20 is general purpose flow sensor,Its working rane can be defined according to its nozzle size for low flow range application.With proper installations,sensor achieves better accuracy Special Features:Inlet and outlet on same side,Compact Design.   Applications:• Hydraulics• Agriculture• Automobile• Diesel• Wind energy• Food and Beverages• Heavy Engineering• Power• Off Shore  

• Ambient Temperature: 60 Deg Micro Switch
• Cable gland: Pg 11
• Work Ambient Temperature: 60 Degree C
• Protection: IP 40
• Normal sensitivity: 100 gm / 400 gm
• Microswitch contacts: 15 amp, 230 v ac, potential free
• Housing: Cast al

The S type load cell with Low Deflection & Creep, Excellent Overload Capability is specially designed for aggregate weighing to give Standardized output when Multi- load cells are used.  Application:1.    Hanging type aggregate bin weighing2.    Hanging type water and cement bin weighing Standard Features:1.    Low profile design2.    Low Deflection and creep3.    Standardised output for Multi Load cell application4.    Excellent overload capability Options:Capacity range available in Kg:25/50/100//200/500/750/1000/1500/2000

Many applications require continuous temperature monitoring of bearing housing. The PT 100 Bearing Temperature RTDs due to their linear resistance-temperature characteristic are used for temperature sensing, measurement and control of these devices. The output signal of RTD/ BTD is given to a temperature indicator or a temperature controller for achieving the desired measurement and control. Features: Various lead lengths and colour codes of wires can be supplied. Customized designs and various metal housings can be supplied. The RTDs are available in various dimensions right from small Bead type sensors to Plate type RTDs. The BTDs are manufactured as per customer requirements and design. Please contact us for readily available, standard designs and special designs. Applications: The PT100 BTDs can be used for continuous temperature indication and monitoring of bearing housing for the following equipments: AC Motors. DC Motors. AC Generators (Alternators). Transformers

• Accuracy: + 0.2 degrees C
• Item Code: DWT-8102
• Resolution: 0.1 degrees C
• Sensing: Standard Platinum RTD element
• Range: - 40 to + 60 degrees C
• Size of Body: 320 x 90 mm diameter
• Weather Shield: Weather shield coated with weather proof reflective white paint
• Size of body: 320(H) x 90 mm diameter (with weather shield)
• Housing: Nylon body with weather shield and brass stem to mount the sensor. The Sensor is fitted with a three pin MS connector for easy removal

• Brand Name: TE Connectivity
• Range: 1g to 10000 G
• Model Name/Number: 7132A
• Acceleration Range: 50+-2000 G
• Power: Low power consumption
• Material: SS, Titanium
• Usage/Application: Laboratory
•  :  
•  :  
•  :  
•  :  

Description Available Sensors: Beam Detector Glass Break Sensor Vibration Sensor Motion Sensor Shutter Sensor Door Sensor LoRa Sensor 5D Sensor PIR sensor Intelligent Temperature Sensor   General Feature List   * Features are indicative and may not be available in each model. • Beam Detector – Beam Detector use invisible light to scan a defined area.• Glass Break Sensor – Glass Break Sensor is used for detecting glass vibration and breakage.• Vibration Sensor – Vibration Sensor recognizes movement or vibration.• Motion Sensor – Motion Sensor detects the movement of human body automatically in the detection area.• Shutter Sensor – Shutter Sensor senses automatically the opening of the shutter.• Door Sensor – Door Sensor able to monitor and detect theft.• 5D Sensor – 5D Sensor is designed specially for intrusion detection.• LoRa Sensor – Wireless Door Magnetic Sensor & Wireless Smoke detector based on LoRa technology.• Intelligent Temperature Sensor – Intelligent Temperature Sensor monitors ambient temperature of room, lobby, closed area.

With firm commitment to quality, we are engaged in offering sophisticated Twin Beam Sensors, which is procured from the most eminent vendors of the industry. Category: Security Systems

• EMC conformity: white

We are offering humidity cum temperature sensor. key feature of humidity cum temp transducer cht series sensor got below key feature for reliable performance and provides 4-20 m amp for temp and rh which can be integrated with any controller plc. ● humidity measurement range: 0~100%rh ● temperature measurement range: -25°c~+60°c or -10°c~+60°c ● wall mounting ● 3%rh humidity accuracy ● long term drift less than 1%rh ● wide temperature compensation range: 0 ~ 40°c ● emc conformity ● resistance to dust and common environmental chemicals. ● independent wind thruway design for thermal dissipation ● excellent performance with a competitive price.

• Features: Efficient, High strength, High performance, Low maintenance, Longer life, Rugged built.
• Analog output: 800…1100 mbar, 0 to 5 V
• Accuracy: +/- 0.3% at 25 C deg
• Humidity Limit: 0% RH to 100% RH (at pressure inlet)
• Supply Voltage: 8 to 24 VDC
• Operating Temperature Range: -40 C deg to +85 C deg
• Dimension: Length 85 mm, Diameter 82 mm,
• Weight: 150 g
• Housing: ABS

• Operating Temperature: -20 deg C
• Diameter: 1/4 inch
• Open Circuit Sensitivity: -48 +/- 3 dB (4 mV/Pa)
• Capacitance: 16pF (Typical)
• Frequency Response: 10 Hz
• Dynamic Range: Greater than 164 dB
• Cartridge Thermal Noise: Less than 35 dB (A)

Advanced transportation facilities, efficient workforce, on time delivery of the products make us stand out from the crowd. We are committed towards providing quality-assured products and thus we keep a strict check on the production procedure.

• Pressure Range: 300hPa to 1100hPa ( 9000m to -500m)
• Weight: 1.18g
• Size: 21mm x 18mm

BMP180 Barometric Pressure Sensor Module  Features:   Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve accuracy of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device to provide a temperature compensated altitude calculation.   Specifications:   1.8V to 3.6V Supply Voltage Low power consumption - 0.5uA at 1Hz I2C interface Max I2C Speed: 3.5MHz Very low noise - up to 0.02hPa (17cm) Full calibrated

UV Sensors, Actuators, Ignition Transformers, flame switches, Flame Sensors

We make available, Car Parking Sensor, which is equipped with backup camera monitor that comes with a 5" TFT/ LCD mirror monitor screen display and video system. Our car parking sensor is known for its high accuracy and efficiency.

• Feature: Anti Mutual interference. Ease of installation. Wide range of usage

LCD Display Fiber optic sensor sensitivity status is visible, Self diagnosis. Will the sensor be okay after starting the operation? Even after continuous operation for 24 hours, if the operation becomes "unstable", the stability output is generated. Convenient for maintenance.

Industrial Sensor, Laser Marker, Voltage Stabilizer

Wide temperature range Available in K / R / S / B type Assured thermocouple polarity Available in ceramic / fire retardant / splash proof / paper body Available in various lengths and diameters / sizes Cost effective Expendable immersion thermocouple Quick Dependable Highly accurate temperature Guaranteed electrical contact throughout the dip Fast thermocouple response. Easy to operate with very low price. Single or multiple use. Improved design enabled increased lance life   The Knowledge of liquid metal temperature is essential for the production and quality control of steel, cast iron and non-ferrous alloys. The molten metal temperature must be within strict limits to achieve the optimum quality before the heat or melt can be tapped or cast.   APPLICATION FIELD Molten metal temperature measurement in the production and refining processes of iron, steel and other ferrous and non ferrous metals in BOF, EAF, Induction Furnace, holding furnaces, Ladles, and so on.

• Type: Vision Sensor
• Application: Industrial
• Color: Black
• Feature: Durable, High-speed processing
• Finishing: Polished
• Frequency: 50 - 60 Hz
• Phase: Single Phase

RadioSecure SLM is the latest electronic security seal innovation for tracking intermodal containers conveyances using active RFID, GPRS and GPS technology. This high security electronic seal enables shippers, manufacturers and logistics service providers and asset owners to actively monitor the security and integrity of shipments 

• Ambient Temperature Range: up to 45 Degree
• Power Supply Voltage: 18....30 V DC
• Brand: Wenglor
• Inspection Functions: Object detection/Pattern matching/pixel compassion/Presence check/Dimensional check
• Image File Format: NPN / PNP / Push-Pull
• Monochrome Cmos Camera Sensor: Monochrome White Light
• Dimension: 45x52x72 / 45x52x83 mm
• Sensing Distance: 300 mm

Global Brake Wear Indicator Market research report gives a systematic and competent approach to gather important statistics of Global Brake Wear Indicator industry. In which includes industry chain structure, Brake Wear Indicator market classification, dominant market players, product definition, and product scope. Global Brake Wear Indicator Market research report also interprets different market scenarios along with future market trends. Global Brake Wear Indicator research report performs SWOT analysis to gain better insights on Strengths, Opportunities, and Threats muddled in Brake Wear Indicator industry. Brake Wear Indicator Market dynamics, production capacity, consumer volume, supply to demand ratio, Brake Wear Indicator market share and revenue is also deliberated in this research report.

Differential Pressure Sensor, High Pressure Pumps

• Micro Switch Type: Push Button
• Material/Body: Plastic and Stainless Steel
• Current Rating: 4A
• Life Cycles: 10000 Cycles min
• Contact resistance: 10 m Ohms
• No of Pins: 4

To have complete control of the utilities in the plant, it is very important to measure & monitor their consumptions. Steam being the one of the costly utilities in the process plant a proper measuring system must be in place. Unless & until we monitor, we cannot optimize its usage.

Remote Sensor - Methane or LPG, Boiler Gas Train

We are the main supplier of this product.

Fuel Level Sensor, auto cable

Color Sensor, angle measuring system, fiber optics sensor, Magnetic Sensor