Separation Equipment Dealers in Bhusari Colony, Pune

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in a dense cake form. Clean oil drains back directly to the tank.

Condensate pipe carries approximately 90% (by volume) of flash steam, and 10% of condensate. This bi-phase condition occurs immediate downstream of the trap or discharge orifice. To recover the flash steam, the bi-phase fluid has to be separated into condensate and flash steam. As the pressure is low, the separation method cannot allow much pressure drop, but must separate the two phases efficiently, so that the flash steam is dry enough to use.Heating of feed water with the help of flash steam generated from boiler blow down. In continuous blow down system, especially where blow down rates are high as a result of poor feed water quality, Flash Separators can be used to recover energy from blow down. This can improve boiler efficiency substantially, and increase the steam generation of the boiler. (Every 6 degree C rise in feed water temperature results in 1% fuel saving.)

The steam is used in the process plants at various pressures depending upon the temperature requirements. The condensate from the high pressure steam when comes to low pressure, some part of the condensate get evaporated which is called as flash steam. Recovering the maximum possible flash steam back to the feed water tank reduces the fuel consumption of steam boiler. Flash steam has substantial amount of heat which is ignored & vented to atmosphere in most of the process plants. The percentage of flash steam generated from condensate is lower but the heat content of flash steam is high. A properly designed flash steam separator can separate the maximum flash steam from the high pressure condensate & send it back to the feed water tank where it gets mix with the feed water increasing its temperature. Higher the steam pressure used in equipment higher amount of flash steam will be generated from condensate.

We are successfully ranked amongst the topnotch entity offering a wide range industrial moisture separator. This separator is comprised of a variety of filters, pollution retention system, and high rate of cod. The provided separator removes 98.99% of salt from the water.

Raw Cashew Size Sorting Machine exported and supplied by us is suitable for all types of cashews and a preferred choice of many manufacturers. The Cashew Size Sorting Machine is known for its efficiency and flawlessness. We have the most competitive price range and have always satisfied our clients by providing a timely delivery. Specifications Capacity : 1,200kg/hrDimension octagon drum (DxL) : 1200 x 7000 mmDimension (DxRxC) : 12000 x 2000 x 2500 mmPower : 3 Hp – 2.2 KwPower supply : 440V - 3 phases - 50HzAfter sorting, we’ll get 6 kinds of raw cashew with different sizesInclude : 02 setSet 01 : supplying conveyor beltSet 02 : Cashew size- sorting machineWorkforce : 02 people

• Power: 1 H.P. Single Phase Electrical Motor.
• Supply: 230 V, 50 Hz.

This machine employs the vibration principle for better screening of the sand. Wet sand (moisture content below 5%) can be effectively screened through this machine. The machine is capable of screening high volumes of sand and hence employed for medium and large scale operations.

Key Filters is a supplier of the Reverse Dutch Twill Weave filter belts used in ribbon style continuous screen changers. A large inventory of standard meshes and sizes are stocked for immediate delivery. Please contact us regarding your specific requirements.Parkinson Technologies, Inc. has introduced a first-of-its kind feature to its Key Filters brand that will lend added safety and efficiency to continuous belt screen changer operation

Our wide range of oil skimmers is designed for the recovery of valuable oil product and prevents oil pollution, it is also used for efficient separation of oil from process fluid. With the self-adjusting mechanism of the wiper in the skimmers, it is prevented from wear and increases its efficiency. We provide our skimmers with the belt that ensure constant pressure and alignment of the machine for smooth functioning. Salient features: continuous oil & tramp oil from process fluid self-adjusting wipers to compensate for wear constant pressure and alignment with the belt are assured minimum maintenance prevents oil pollution recovery of valuable oil products longer service life requires minimum maintenance

centrifugal oil filters, engine oil filters, industrial oil filters

centrifugal oil filters, centrifugal oil cleaner

Air Oil Separators remove compressor lubricant from the compressed air stream. An Air Oil Separator reduces the lubrication oil entrained in the compressed air to 2-3 ppm.

Oil Water Separator, Effluent Treatment Plant Clariflocculators

Kettles, Reactors, reaction tanks, Evaporator, Tanks & Vessels

electrostatic oil purifier, hydraulic Oil Filter Paper & collectors

liquid separator, Pall Ring, Industrial Plant Revamping Services

Oil Mist Collector, Stand Alone Mist Collector

Cleaning System, industrial ice making machines, mixer agitators

Raotary Table Bin / Tray Cleaning Machine

Moisture Separators, high pressure piping services, process piping services