Separation Equipment Dealers in Kothrud, Pune

Condensate pipe carries approximately 90% (by volume) of flash steam, and 10% of condensate. This bi-phase condition occurs immediate downstream of the trap or discharge orifice. To recover the flash steam, the bi-phase fluid has to be separated into condensate and flash steam. As the pressure is low, the separation method cannot allow much pressure drop, but must separate the two phases efficiently, so that the flash steam is dry enough to use.Heating of feed water with the help of flash steam generated from boiler blow down. In continuous blow down system, especially where blow down rates are high as a result of poor feed water quality, Flash Separators can be used to recover energy from blow down. This can improve boiler efficiency substantially, and increase the steam generation of the boiler. (Every 6 degree C rise in feed water temperature results in 1% fuel saving.)

Raw Cashew Size Sorting Machine exported and supplied by us is suitable for all types of cashews and a preferred choice of many manufacturers. The Cashew Size Sorting Machine is known for its efficiency and flawlessness. We have the most competitive price range and have always satisfied our clients by providing a timely delivery. Specifications Capacity : 1,200kg/hrDimension octagon drum (DxL) : 1200 x 7000 mmDimension (DxRxC) : 12000 x 2000 x 2500 mmPower : 3 Hp – 2.2 KwPower supply : 440V - 3 phases - 50HzAfter sorting, we’ll get 6 kinds of raw cashew with different sizesInclude : 02 setSet 01 : supplying conveyor beltSet 02 : Cashew size- sorting machineWorkforce : 02 people

• Power: 1 H.P. Single Phase Electrical Motor.
• Supply: 230 V, 50 Hz.

This machine employs the vibration principle for better screening of the sand. Wet sand (moisture content below 5%) can be effectively screened through this machine. The machine is capable of screening high volumes of sand and hence employed for medium and large scale operations.

Our wide range of oil skimmers is designed for the recovery of valuable oil product and prevents oil pollution, it is also used for efficient separation of oil from process fluid. With the self-adjusting mechanism of the wiper in the skimmers, it is prevented from wear and increases its efficiency. We provide our skimmers with the belt that ensure constant pressure and alignment of the machine for smooth functioning. Salient features: continuous oil & tramp oil from process fluid self-adjusting wipers to compensate for wear constant pressure and alignment with the belt are assured minimum maintenance prevents oil pollution recovery of valuable oil products longer service life requires minimum maintenance

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in a dense cake form. Clean oil drains back directly to the tank.

• Efficient: Cost-effective

Fenix supplies a large variety of separator internals FXIntSep used in the Oil & Gas industry. Many of these have uses in other industry applications, but some have been developed specially for areas in processing of natural gas and petro-crude such As: • Oilfield production (gasoilwater) • Separators (onshore, offshore and F.P.S.O.) • Test separators • Free Water KO drums • Oilwater coalescers • Compressor scrubbers • Gasliquid KO drums & inlet scrubbers Fenix offers a range of design services to support your front-end engineering including process simulations, internals selection and vessel sizing and optimisation. In addition we offer computer aided drafting and 3-D plant layout design. We continually review our technologies and employ new approaches whenever demanded to improve quality and flexibility. Because process simulation, design and manufacture are carried out in-house, chance of any error or slip is minimized. Our specialization in using AspenPlus is employed in solving the typical challenges encountered by clients in their operations. and assist us to design superior new plants and retrofit existing plants for higher productivity. Equipments we design and manufacture in this category are : Inlet distributor Perforated baffle plates Straightening foam breaker vanes Foam breaker matrix Coalescers Plate packs Matrix packs Dual media coalescers Wiremesh demisters Vane mist eliminators Sand jet spray systems etc.

It is very important to supply dry steam to the equipment. Moisture separator installed at inlet of the pressure reducing station ensures maximum Moisture Separator removal from the steam.   It reduces wet steam Long working life of equipments as reduced water hammering Reduced erosion & corrosion in the steam system Reduced pipe & heating surface scaling Other Applications: At inlet of the Critical equipments in steam lines like Steam flow meter Moisture Separator, Control valves, inlet of critical process equipments etc. Available Sizes: From 15 NB to 200 NB.

We are successfully ranked amongst the topnotch entity offering a wide range industrial moisture separator. This separator is comprised of a variety of filters, pollution retention system, and high rate of cod. The provided separator removes 98.99% of salt from the water.

Air Oil Separators remove compressor lubricant from the compressed air stream. An Air Oil Separator reduces the lubrication oil entrained in the compressed air to 2-3 ppm.

The coolant drum that has the permanent magnets rotates at slow speed and in the opposite direction of the liquid flow. The fine iron particles get attracted to the strong magnetic poles present in the separator drum. A brass scrapper is attached at the other end of the machine that helps in scrapping the ferrous particles from the magnetic poles.     Application   Best product to use in automotive and chemical industries. Removes ferrous particles from coolant liquid to ensure smooth functioning of the machines.   Features   Stainless steel construction Reduced machine downtime and better machine accuracy. Reduced Pump wear. Easy installation in restricted spaces. Low initial cost. Virtually no maintenance costs. Available in different capacities. Used for longer period. Reduces the operational cost of the grinding machine. Enhances the life of the machinery.  

liquid separator, Pall Ring, Industrial Plant Revamping Services

Oil Mist Collector, Stand Alone Mist Collector

Raotary Table Bin / Tray Cleaning Machine

Oil Water Separator, Effluent Treatment Plant Clariflocculators

Kettles, Reactors, reaction tanks, Evaporator, Tanks & Vessels

electrostatic oil purifier, hydraulic Oil Filter Paper & collectors