Separation Equipment Dealers in Sinhagad Road, Pune

• Application: Used to Separate Stone and Sand Mixed in the Biomass Fuel
• Body Material: Metal
• Surface: Polished
• Application: Industrial
• Designed with: Screw Feeder, Vertical Cyclone, Rotary Air Lock Valve, ID Fan

We are one of the prominent manufacturers and suppliers of stone and sand separation system in Maharashtra.   With years of experience in the industry, we offer our clients an exceptional range of Sand & Stone Separation Systems in terms of capacity that are quality approved in nature and are in adherence with the set quality standards of the industry.   This system is used to separate stone and sand mixed in the biomass fuel such as soybean husk, rice husk, etc.   The system is designed with basic four equipment’s. Screw feeder Vertical cyclone Rotary Air Lock Valve ID Fan   Initially the biomass fuel is feed to the screw conveyer through the hopper. The screw conveyer carries the dried biomass and discharges it in the Y Shoot which is attached to the discharge point of the Screw conveyer. The Slanting screw conveyer is attached with one more screw conveyer under it. The smaller screw conveyer attached to the below side of the bigger screw conveyer, collects and carries the mud / sand present in the biomass fuel to the discharge point. The mud / sand which is collected through the discharge point of the smaller screw conveyer is ultimately taken away to the dumping point with the help of a trolley.   Now the biomass along with the big stones enters in to the Y shoot. The Y shoot is connected to the Vertical cyclone with a connecting pipe. The biomass entering the Y shoot and is sucked in to the vertical cyclone with the help of the ID fan. The process at the point of the Y shoot helps to separate the stones present in the biomass fuel.  The stones present in the biomass are collected at the discharge point of the Y shoot.   The clean biomass is entered in to the vertical cyclone and is discharged on the belt conveyer through a Rotary Air Lock Valve (RALV). RALV prevents the reverse entry of air in to the vertical cyclone. Ultimately the clean fuel enters the Boiler increasing the capacity and efficiency of the boiler.   Stone and sand separation system is designed with precise engineering. This system is tailor made as per requirement of the customer and capacities of the boilers.   Features and Gains. Designed with precise engineering The system is tailor made depending on requirement of the customer and capacities of the boilers. Increases capacity and efficiency of the boiler Reduces work load of the workers. System is provided with all supporting structure reducing the work load at the site.

  Load Capacity – 400 kgs / Hr.   Method of separation - Magnetic   Machine manufactured for automatic separation of dust, iron, ceramics, cermets and diamond from the lot. Required material out of the lot is tungsten carbide   Sorting capacity - 400 kg / hr.   Methode of Separation - Magneti

We are involved in offering Oil Skimmer that is used as a pre-treatment prior to chemical treatment. It removes floating oil from water based effluent to minimize treatment cost , saves coolants by removing tramp oil, reduces fluid disposal costs, prevents plugging of spray heads and filters. This oil skimmer particularly suitable for carriages on machine tools, overhead cranes, welding machines, rolling mills, atomic power plants and numerous other applications. The new design offers robust construction, high load capacity, long life and easy installation as it's key features. Advantages: Most inexpensive way of removing oil from water Conserve parts wash water by removing oily wastes Helps meet government requirements for water discharge Skimmed oil can be recycled and reused as a lubricant or fuel

• Used: for the removal of Moisture, oil, dust and mist particles.
• Filter: 5 mu & 0.1 mu
• Filter Type: Air Filter

The PROTECTOR PROFESIONAL metal separator is installed directly above the material inlet of an injection-moulding machine, extruder, or blow-moulding machine. It detects all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium, …) – even if such contaminants are enclosed in the product. Metal contaminants are automatically and reliably separated by means of the reject unit ("quick-valve"). the special design of the protector professional guarantees highest scanning sensitivity for smallest metal particles even under high mechanical loads, which may result from high superstructural assemblies, for example when various conveying, dosing, mixing, or feeding units are used simultaneously. The design with integrated reinforcing frame ensures that the high-performance detection unit is in no way affected by vertical mechanical forces.

• Brand Name: Varisort N

We are offering varisort n polymer sorting machine. The varisort n, utilization multiple spectrum analysis based on reflected light, separates out of specification contaminants from plastic material flows. High quality, high purity plastic fractions are the result, ready for subsequent processing is a high-quality plastic fraction in pet recycling the varisort n polymer separator automatically separates unwanted plastic types (e.g. Pla, pvc, hdpe) from the pet bottle flow.

• Material: Cast Iron
• Material: Metal
• Capacity: 500 to 50000 KG
• Construction: Modular type or Civil
• Surface: Polished

We bring forth a quality range of Grit Separators in the market. Grit Separators, offered by us, are available with centrally driven drive head with mounting on RCC or Fixed MSEP bridges. We provide designing and manufacturing of bridges for Grit Separators. The drive head of our Grit Separator comprises of unique SPUR Gear / Worm – Wheel drive options for tanks ranging from 2 x 2 meters to 12 x 12 meters. Available in SS 304 / SS 410 and MSEP options with CGL make motor drive, these Grit Separators are sturdy, durable and extremely reliable.

Oil recovery centrifuge can be used for various applications including Gear Manufacturing, Fastener Manufacturing, Spring Manufacturing, Gun Drilling, CNC Machines, Auto Components etc.Oil Recovery Centrifuge works on principle of centrifugal separation. Rotor bowl made of perforated steel screen is driven by motor. Chips Parts from which oil is to be recovered are loaded in the rotor bowl. Centrifugal force created in the rotor separates oil from surface of Chips Parts. Reduced pollution and environmental impact, Save over 1000 Ltrs. oil per month, Substantial savings on cost of oil, Improved Plating Finish.

• Type: BELT TYPE
• Brand Name: J D AUTOMATION
• Material: PU
• Color: GREY
• Function: Motorized Operated
• Color: grey

DESCRIPTION 10 times faster oil removal in less    than 1/24th hour• Less operational power    conusmption• Low maintenance cost• Increase in fluid life• Low ETP cost• Lower sucction of fluid, so low    wastage   Oil skimmers are normally all that is important to expel oil from a fluid. Now and again, notwithstanding, oil skimmers might be utilized to pre-treat a liquid. For this situation, the oil skimmers evacuate however much of the oil as could be expected before more costly and tedious measures are utilized. Pre-treating the liquid with oil skimmers lessens the general expense of cleaning the fluid. Oil Skimmers There are two essential sorts of oil skimmers. One compose is utilized to channel and evacuate oil, trash, and undesirable materials. The other kind is utilized to recuperate or catch oil in a usable state. Normally, this second kind of skimmer is utilized to tidy up oil slicks in production lines, refineries, and waterways. Applications for oil skimmers incorporate into plant pumps, tanks, and coolant frameworks and open air cooling and settling lakes. While choosing oil skimmers, imperative details to consider incorporate limit, expulsion or recuperation rate, and aggregate stream. At the point when limit is estimated in gallons, stream is estimated in gallons every moment (gpm) and the expulsion or recuperation rate is communicated in gallons every hour (gph).

We are an eminent and leading trader of baffle type moisture separator.

• Weight: 2500 kg
• Product size max: 80 mm (width) x 100 mm (length)
• Product size min: 60 X 90 mm
• Camera Resolution: 0.11mm
• Speed: 200 m/min
• Dimensions: Approx 8500 (L) x 1350 (W) x 2000(H) ( Dimensions in mm)
• Total Power: 11 kw (15Hp)

Large inventories are blocked due to slow manual sorting process of folding cartons. Remove these bottlenecks by introducing automatic carton sorting system “Supersort” by Pratham. “Supersort” is fast, reliable and durable system to do 100% inspection of folding cartons.  

Our wide range of oil skimmers is designed for the recovery of valuable oil product and prevents oil pollution, it is also used for efficient separation of oil from process fluid. With the self-adjusting mechanism of the wiper in the skimmers, it is prevented from wear and increases its efficiency. We provide our skimmers with the belt that ensure constant pressure and alignment of the machine for smooth functioning. Salient features: continuous oil & tramp oil from process fluid self-adjusting wipers to compensate for wear constant pressure and alignment with the belt are assured minimum maintenance prevents oil pollution recovery of valuable oil products longer service life requires minimum maintenance

We are offering oil skimmer.

We supply special Centrifuge Separators that have a very high solid-liquid separation efficiency. These Separators are used in various applications including Paint Sludge Dewatering, Water Cleaning, Coolant Cleaning, Oil Cleaning, Glass Fines Removal, Paper Fibre Removal and many more. Some of our major clients are Volkswagen India, TATA Autocomp, Polyplastics, Bajaj Auto, SAPL, Sandhar Auto, Eicher Polaris, Bharat Forge and others.Centrifuge Separators work best with processes like Brushing, Honing, Lapping, Deburring, Grinding and so on. Materials like Ceramics, Cast Aluminum with over 5% Silicon, Glass, Tungsten Carbide, Molybdenum, Carbon, in addition to Steel are best handled by these Separators.A cleaning efficiency of above 95% of all particles > 3 microns is possible with centrifuge separators. For Paint Sludge, the overall weight can be reduced to nearly 50%, thus saving substantially on disposal costs. Separators prove to be extremely cost-effetive as no filter media is required. For Coolants/Oil there is a drastic saving in the Top-Up requirement and a major saving in Tooling Cost and a Drop in Product Rejection Rate. Download Catalogue - Centrifuge Separator AECPL LEAFLETPlease visit : Aquarius Enviro Division The Centrifuge Separators have a wide range of applications, viz.   Coolant Cleaning Paint Sludge Removal Oil Separation Metal Fines Removal Phosphate Degrease Sludge Glass Fines Removal HFO & Thick Oil Cleaning PCB Production Water Treatment Parts Washing Application

• Type: Heat Treatment Plant
• Usage: Industrial

Grit Separator Mechanism, Rotary Pump, mechanical fine bar screen

Sludge Separator, pretreatment plants, moisture drying oven

Air Oil Separators remove compressor lubricant from the compressed air stream. An Air Oil Separator reduces the lubrication oil entrained in the compressed air to 2-3 ppm.

We supply special Centrifuge Separators that have a very high solid-liquid separation efficiency. These Separators are used in various applications including Paint Sludge Dewatering, Water Cleaning, Coolant Cleaning, Oil Cleaning, Glass Fines Removal, Paper Fibre Removal and many more.

Oil Purifiers, bakeware set, Dinner Set, Plastic Jars

Air Oil Separator, Thermostatic Valve, Air Filter

Oil Separator, Centrifuge, mineral bed filteration system, crystal filter