STP & ETP Equipments Dealers in Shivane, Pune

We are offering chemical agitators, stirrers, we manufacture agitators that are designed in accordance with the clients requirements. All these agitators are used across several industries. Made using premium quality of materials procured from reliable sources all these agitators not only withstand excessive wear and tear but also can be installed with great ease. All these agitators require high precision and are also flawless in performance.

Anchor-type agitators are principally designed to mix highly viscous products and non-Newtonian fluids, i.e., they lack a certain degree of viscosity because it depends on the temperature. These agitators can be mounted in tanks with rounded or conical bottoms.

Anchor-type agitators are principally designed to mix highly viscous products and non-Newtonian fluids, i.e., they lack a certain degree of viscosity because it depends on the temperature. These agitators can be mounted in tanks with rounded or conical bottoms.

In any coolant application scum is generated. If this is not removed it affects the coolant life. A belt skimmer is a very simple product to remove the floating oil. A belt skimmer is mounted on tank tops. The unit consists of two (2) pulleys. Care is taken that the bottom pulley is below fluid surface level. The top pulley is connected to a geared drive. An endless belt of polyurethane material rotates on the pulleys. Bottom pulley has a self-tensioning arrangement to compensate expansion of belt over time. Fluid flows slowly over the belt leaving the floating oil on the surface of the belt.   The belt scrapes through a pair of nylon scarpers near the top pulley. The scraped fluid is collected a tank. The separator tank is specially design with adjustable baffles. This separates the additional water content and diverts it back to the main tank.       Applications  5 HI Rolling Mill  Tandel Rolling Mill  Stainless Steel Rolling  Aluminium Rolling  20 HI Rolling Mill   Cylinder Head Cast Iron Machining  Cylinder Block Cast Iron Machining  Breakliner Cast Iron Machining  Precoating Line  Taper Roller Bearing      Features & Benefits Used for removing un-emulsified oil. Filtration capacity: 5 l/hr. to 20 l/hr. Continuous cleaning operation. Auto belt tensioning. Ease of maintenance. Single drive. Very compact. Ideal for individual machines and large tanks. Standard sized modules are mentioned in attached PDF catalogue. No filters needed. Very low operating cost. No maintenance cost. Auto belt tensioning. Suitable for any liquid (excluding chemicals) Can be made suitable for viscous oil. Robust, compact, and re-locatable. Can be integrated with existing systems without modifications Runs on only one drive. Requires lesser power. Very smooth & silent operation. Occupies less space.

• Application: Fine Screening at STP, ETP Plants, Sugar industry, Agro Industries
• Bar Spacing: 5 / 6 mm
• Bar Thickness: 2 MM / 3MM
• Angle of Inclination: 40 degrees
• Side Margin Required: 100 mm total
• Power pack capacity: 30 liters max.

Our max clean range of Mechanical Fine Bar Screens is an effective solution for the primary unit screening requirements. These Mechanical Fine Bar Screens are made from SS 316 & SS 304 materials, and are fitted with specially laser cut screen bars. They are operated by a power efficient 1 HP hydraulic power pack, and consist of single cylinder drive and two cylinder weight management system for smooth operations. The operation of these Mechanical Fine Bar Screens is controlled by control panel with timer as well as ultrasonic level sensing option which are in line with prevalent standards. Mechanical Fine Bar Screen operates using two sets of fixed and moving bars which rotate cyclically discharging screened debris from one step to the next,

• Material: MS
• Mounting Type: Taper Flange
• Motor Power: 0.125 HP
• Size: Capacity 200 liters
• Model Type: DPS-M-20-500-100

Thus the shear stresses and strain rates vary greatly throughout an agitated liquid in a tank. As the viscosity of the fluids to be mixed increases, the physics fluid mechanics change from that of turbulent flow (like in liquid agitators) to that in which viscous drag forces dominate. Additionally, some fluids exhibit Non-Newtonian behavior – their viscosity cannot be designated by a single coefficient. Mixing of such fluids requires special heavy duty agitators. As the dynamic viscosity of a Newtonian liquid is independent of shear at a given temperature, its viscosity will be the same at all points in the tank. In contrast the apparent viscosity of a non-Newtonian liquid varies throughout the tank. This in turn significantly influences the mixing process. For shear thinning liquids, the apparent viscosity is at a minimum in the immediate vicinity of the agitator. The progressive increase in the apparent viscosity of a shear thinning liquid with distance away from the agitator tends to dampen eddy currents in the mixing tank. In contrast, for shear thickening liquids, the apparent viscosity is at a maximum in the immediate vicinity of the agitator. In general shear thinning and shear thickening liquids should be mixed using high and low speed agitators respectively. Wherever possible, the movement of the entire contents of the agitator vessel should be avoided as rapid movement tends to segregate the components due to centrifugal forces.

belt oil skimmer, Aluminum Machining Filters, Magnetic Screw Conveyor

KATRONIC make portable and field mounted Ultrasonic Flowmeters for liquids have easy to clamp on sensors with no process interruption, no pressure loss, fast and accurate, with diameters from 10 mm to 6.5 m. Can be used up to 4 independent flow channels.

We are involved in offering Oil Skimmer that is used as a pre-treatment prior to chemical treatment. It removes floating oil from water based effluent to minimize treatment cost , saves coolants by removing tramp oil, reduces fluid disposal costs, prevents plugging of spray heads and filters. This oil skimmer particularly suitable for carriages on machine tools, overhead cranes, welding machines, rolling mills, atomic power plants and numerous other applications. The new design offers robust construction, high load capacity, long life and easy installation as it's key features. Advantages: Most inexpensive way of removing oil from water Conserve parts wash water by removing oily wastes Helps meet government requirements for water discharge Skimmed oil can be recycled and reused as a lubricant or fuel

Water Treatment Equipment, ion exchange plant, Sewage Treatment Plant

Propeller agitator, Arsenic Removal Filter, Nano Filtration Plant

anchor agitators, emulsifying mixer

Mechanical Inclined Raked Coarse Screen, Rotary Pump

Agitator Mixer, SS Pulsation Dampener

Industrial Agitators, Pumps