Shore Auto Rubber Exports Pvt. Ltd. Khed, Pune, Maharashtra

The hoses are ideal for connections between engine mounted charge air cooler system parts They come in a range of straight, shaped or convoluted shapes, as required. The convoluted shapes are required when there are slight mis-alignments during fitment or functioning. The hoses are flexible enough to endure the vibrations caused due to these mis- alignmentscompressions3-axial movements.

Shore Auto offers silicone coolant hoses in a range of shapes, colours and sizes. Unless otherwise specified, our standard blue Silicone/Polyester hoses meet the requirements of SAE J20 R1 Class A. The hoses generally have 3-4 plies of Polyester fabric, but the # of layers can be increased/decreased depending on the working pressure requirements Temperature range: -56 to + 180 degrees Celsius (-70 to + 350 Fahrenheit). Good resistance to weather and ozone, and resists corrosion from coolant and heat transfer HOSES FOR ORGANIC-ACID BASED COOLANTSWe offer a special range of hoses, for resistance to organic acid based coolants, which contain sebacate or 2-ethylhexanoic acid. These extended life anti-freeze coolants which are extremely corrosive in nature, require hoses of specially designed materials. Using normal blue coolant hoses of the standard material for these coolants, will result in pre-mature failures. Please contact us for a list of available sizes in straights, elbows, and reducers.

The reinforcement fabrics used are usually Polyester and Nylon, and sometimes even Kevlar ® Aramid are used for higher temperatures, as per the customer’s requirements The inner tube and outer cover materials may vary, for example, inner nitrileouter neoprene (available in reinforced, as well as non-reinforced options) We also can develop non-reinforced extruded tubes in different shapes, if the service pressure requirements are very low

For Air/Water/Fuel transfer, we manufacture a range of hoses in SBR, , PVC/NBR, Hypalon®, Viton®, Neoprene ® (CR), Vamac ® (AEM) and NBR The reinforcement fabrics used are usually Polyester and Nylon, and sometimes even Kevlar ® / Aramid are used for higher temperatures, as per the customer’s requirements The inner tube and outer cover materials may vary, for example, inner nitrile/outer neoprene (available in reinforced, as well as non-reinforced options) We also can develop non-reinforced extruded tubes in different shapes, if the service pressure requirements are very low

shore auto rubber exports offer a range of high- end silicone straight / elbow / bellow hoses for use in marine applications exceeds sae j2006 – r3 requirements (third party certification available) for usage temperature up to 180 degrees centigrade, the hose is 4-6 ply polyester reinforced silicone for higher temperatures up to 260 degrees centigrade, the hose is 4-6 ply meta-aramid reinforced silicone .

Food grade silicone are made with Platinum cured silicone and have a very low glass transition temperatures. They are transparent, and hence one can see through to the fabric reinforcement. Food grade silicones show excellent heat resistance, cold flexibility, dielectric properties and especially good resistance to weather, ozone and UV rays. Food grade silicone formulations are designed specifically for use with food products. FDA approved silicone has reduced food taint and very low bacteria build up resulting in ultimately lower maintenance costs. The temperature range is between -50 °C +180 °C. Food grade silicone are be reinforced with multiple plies of knit 

Light-weight, low pressure custom-built hoses for the Railways Hoses used for Air-conditioning, Heating, Ventilation, Radiator Coolant, Brake Cooling, Roof drainage and Engine applications Extremely low smoke emission / smoke toxicity. Temperature range:- 50 to +250 degrees Celsius (depending on material and construction)

we supply epdm hoses in a wide range of standard and customized shapes and sizes, with different fabric reinforced options. We also have epdm corrugated (convoluted) hoses, for air-cleaner applications in automotive filters. These hoses have a higher than usual bend radius, for trickier connections, and high ‘vibration’ and ‘vacuum pressure’ resistance. the continuous service temperature of epdm hoses is -30c to +120 degrees c maximum, with peak temperatures of 150 to 160 degrees c we also supply epdm-peroxide cured hoses, where exceptional compression set and heat resistance is needed.

Material : EPDM Rubber

Color : Black

We offer a special range of hoses, for resistance to organic acid based coolants, which contain sebacate or 2-ethylhexanoic acid. These extended life anti-freeze coolants which are extremely corrosive in nature, require hoses of specially designed materials. Using normal blue coolant hoses of the standard material for these coolants, will result in pre-mature failures.

Our silicone Turbo charger / CAC hoses also maintain a minimum of SAEJ20 Class A specifications, unless otherwise specified by the customer. The hoses are ideal for connections between engine mounted charge air cooler system parts They come in a range of straight, shaped or convoluted shapes, as required. The convoluted shapes are required when there are slight mis-alignments during fitment or functioning. The hoses are flexible enough to endure the vibrations caused due to these mis- alignments/compressions/3-axial movements. Temperature range: -56 to + 250 degrees Celsius (-70 to + 500 Fahrenheit) if reinforced with meta-aramid, or Temperature range: -56 to + 180 degrees Celsius (-70 to + 350 Fahrenheit), if reinforced with Polyester) Available with the option of Fluoro ilicone or FKM inner lining, for added oil/acid fuel resistance -Hoses with Metal fittings and Crimped ends also can be developed as per your requirement -In house test rig available for life-cycle testing of the hoses (cyclic pressures between 0 and 3 bars, while maintaining temperatures of up to 220 degrees Celsius, inside and outside the hose.)