Special Coating Dealers in Chikhali, Pune

We offer optimum quality Heat Resistant Paint in India that can resist heat up to -250oC to 600oC Our paints can be used as heat resistant coating for chimney stacks, pipes, petro-chemical & water tanks, boiler fronts, duct work, piping and furnace structure. These paints give good performance in external and internal application in offices, buildings, factories, warehouses and industrial plants. Due to its higher reflectance value, this paint has special use in coating exterior of storage tanks in oil industry. Properties :Heat resistant up to 250oC to 600oC CelsiusExcellent performanceDurableWater resistantColor retentionCorrosion resistance Applications :Chimney stacksPipesPetro-Chemical & water tanksBoiler frontsDuct workPipingFurnace structure

We are one of the prominent manufacturers and suppliers of Specialty Coatings in India. These specialty coatings are available in different forms like dust repellant, anti corrosive etc.

Our Organization Is Engaged In Providing PVC Coating Services For Any Kind Of Springs. PVC Coating Is Done As Per The Specifications Mentioned By Our Clients. We Provide This Coating For Preventing These Springs From Any Kind Of Atmospheric Attack, Abrasion And Moisture. Our Services Are In Compliance With The Industry Standards And Surpass The Expectations Of Our Clients.

Buyers can approach us for acquiring the best quality Anti-Reflective Coating! We are prominent Manufacturer, Exporter, Importer and Supplier of Anti-Reflective Coating in Maharashtra, India. Anti-Reflective Coating that we offer is made from a qualitative material as per stated quality norms. Further, buyers can get it at nominal rates, from us.   We do single layer MgF2 coating and multi-layer BBAR coatings on both glass and plastic lenses. Our plastic lens coating has a special anti-scratch layer that improves the scratch resistance of the bare plastic. We have recently acquired the Satisloh SP-100 Sputter Coating System. The SP-100 is a precision sputter coater developed and sold by Satisloh GmbH. The SP-100 has a Silicon Sputter target and creates Broadband coatings through the alternate deposition of Silicon Nitride and Silicon Oxide layers. The Sputter Coating Chamber is particularly known for extremely hard and durable coatings and for very high levels of repeatability that allow for accurate deposition of multi-stack coating formulae.   Some of the coatings that we offer are : Standard BBAR Coating : This is the typical coating for most visible or NIR applications. Ravg<0.5% from 400 to 700 nm. This can be extended to any 300nm range such as 550-850 for NIR applications. We do this coating on glass and plastic lenses. Ultrawide BBAR Coating : This is a newly developed coating that covers the entire visible and NIR range simultaneously. Ravg< 0.8% for 400 to 940 nm. Dual Band Coating : Here we provide low reflection over the entire visible range as well at any specific wavelength outside this range. This is typically used in Night Vision and other defence applications. Ravg< 0.5% for 400 to 700 nm and R<0.5% at 1064 nm. Single Layer MgF2 coating : We also offer single layer MgF2 coating on our old chamber. This is the typical traditional lens coating that gives good result on glass, especially high index glasses. It is also durable and cheaper than BBAR coatings. The curve below is for the high index glass N-LAK34.

• Packaging Size: 1 & 5 Liters
• Packaging Type: Tin
• Brand Name: Pacific Microsystems
• Color: Light Blue
• Material: RTV Silicone Coating
• Features: Provide strong and permanent bond , Precisely composed , Longer shelf life
• Film Thickness: 200-300 micron

• Packaging Size: 20ltr, 5ltr
• Packaging Type: Drums & Buckets
• Color: All
• Brand Name: cipy
• Features: Slip resistant, Solvent free, Resistant to petrol and acids, Crack bridging ability, Extremely wear resistant

• Size: 25 cmX25cm,30cmX40cm
• Brand Name: NEXO SEAL
• Packaging Size: 20 L
• Form of Paint: Liquid
• Drying Time: 1-3 hrs

INSILCOTE is a unique Room Temperature Vulcanised, (RTV) silicone rubber formulation, specifically developed by Mace Technologies, South Africa, in collaboration with the Electric Power Research Group of the University of the Witwatersrand for the prevention of pollution flashover of high voltage outdoor insulation. The exceptional hydrophobicity of INSILCOTE inhibits the formation of continuous moist conductive layers on insulator surfaces. This, in turn, limits the flow of leakage currents, thus preventing the creation of dry bands and partial discharges – critical steps in the flashover process.

Electroless nickel plating improves corrosion resistance, increases the surface hardness of the material, provides a uniform and dense coating, and, in many cases, maintains the same surface finish the material had before plating.

“ PEPCOAT ” is the trade name of our quality phosphorus- Nickel metal alloy coating. We undertake coating of customer parts ranging from small fasteners to large rollers and Chemical Equipment.A New and unique Engineering Plating Chetana is a Job shop where we do Electroless Nickel plating on customer parts equipment, We are the pioneers in this field and besides being the most experienced, have one of the largest plating facilities in India. Our plating – called “ PEPCOAT ” and technically known as Electroless Nickel – is an unusual plating because it does not have the handicaps of conventional Electroplating, and offers the following :

• Packaging Size: 20kg,50kg,100kg
• Material: Ceramic
• Application: Condensor heat exchanger,Pumps,Impellers/valves,Bends & Chutes,Hoppers,Electrostatic precipitators.CO2 absorber,Ventillation fan coating
• State/Form: Liquid
• Chemical Resistance: Yes
• Curing Time: 48 Hours
• Long Life Protection: Up To 5 Years

• Packaging Size: 20kg,50kg,100kg
• Material: Ceramic
• State/Form: Liquid
• Chemical Resistance: Yes
• Curing Time: 48 Hours
• Long Life Protection: Up To 5 Years

• Features: Attractive colors, Anti skid quality, Smooth surface

• Brand Name: Demech
• Packaging Size: 10 Kg - 100 kg
• Form: Liquid
• Application: Industrial Use, Hoppers, Buckets, Fans, Chutes, Transfer Lines
• Working Temperature: 60-1200 Degree C
•  :  

• Hardness (Pencil): H-2H
• Flexibility: Passes 6.25 mm
• Impact (Direct/Reverse): 60 -100 kgcm

Heat Resistant powders are based on durable Silicone Resins & heat resistant Ceramic pigments. This product is recommended where excellent UV & Outdoor resistance are required. It is specifically designed for optimum performance in harsh environments, such as automotive exhausts & other high temperature applications.

silicone water repellents, Amino Silicone Emulsion

weather proof frp lining, Frp Products, FRP Lining services

Heat Resistant Coatings, Industrial Paints, resistant paints

alcohol based zircon coating, Foundry Chemicals, coating powder, thinner

Pvc Coating for metal components coating, PVC Plastic Coating

anti corrosive coating, Cast Basalt Pipe, acid proof tile

rubber coating, Molded Rubber Gaskets, Rubber Cords, Rubber Dampers

Electroless Nickel Plating, butter fly valves

deck coating, Epoxy Floor Coating, epu floor coating, esd floor coating

Anti Corrosive Coatings, Anti Static Epoxy Coating Service, Epoxy Coving

Electroless Nickel Plating, Galvanized Light Poles, flanged pipe fittings