Urja Underbody Coatings
168 - 178 Per Kilogram
35 NO (MOQ)
We are providing a wide array of Urja Underbody Coatings to our clients. Our offered coatings are manufactured by using the high-grade material and advanced techniques. Owing to the characteristics like weather resistance, excellent adhesion, and perfect finish, these coatings are widely used in the automobile industry for coating the vehicle bodies from underneath. Additionally, the provided Coating can be availed by our reputed clients at the competitive prices. Sr.No Characteristics Result : Base Polymer Base Colour Black Viscosities 200-250 Sec. (Ford Cup-B-4) Air-Drying Time Touch Dry- 20 Min Shelf Life 9 Months from Date of Packaging Temperature Stability 8°C to 56°C Very Good Adhesions to Bare Metal, Solid Content 68-72 Percent UV-Resistance Very Good Weather ability Very Good Chemical Resistance Good Salt Spray (Test) As Per ASTM Hard Dry- 20 Hrs M-S And Various Substrate 425 to 500 Hrs Passes
wheels ceramic coating
2,700 Per Box
50 Box (MOQ)
Auto45 Reflecta Wheel is formulated with cutting edge German Technology saves your wheels from grime, brake dust, dirt & other damages with an added protection & durability.
Best Deals from Special Purpose Paints
Reflecta Wheel -- Ceramic Coating for All Types of Wheels
Get Price Quote
Pure Furnace Oil, Brown Bio Mass Briquettes, copper sheet scrap
Reflecta Wheel -- Ceramic Coating for All Types of Wheels
Get Price Quote
Nexo Seal NC Thinner, cline cloth sound damping strip, cline room sealant
PU Coatings
Get Price Quote
Known for their longer life expectancy and high performance, our PU Coatings are widely popular among clients. Our PU Coatings are resistant to wear and tear and scratches. We offer PU Coatings at market leading prices. Further, we are listed among leading Manufacturers, Exporters and Suppliers of PU Coatings. Specifications : Weight : 135GSMZinc-coating : 40g/m2-275g/m2Material : 100% NylonWidth : 150cm, 220cm
Epoxy Based Stoving Primer
Get Price Quote
50 Litre (MOQ)
Zinc Metal Spray
200 - 300 Per Bottle
15 Bottles (MOQ)
Cold galvanizing Zinc Metal Spray : Offers Greyish Silver finish supplied in 500 ml Aerosol spray can used for touch up of MS & GI fabrications, solar ground mounting structures/panels, cable trays, gi gratings, tlt & sub-station structures scaffoldings and formworks, gi tubes , lighting poles, telecom & signal towers, tubes, pipes / tube fittings for chemical and petrochemical plants, off-shore platform construction and engineering fabrications of oil rigs, all gi structures in pre-engineered buildings, railings , canopies, guard rails, drainage lines, support structures in all heavy engineering fabrications in mild steel and galvanized steel. quality certification & standard parameters : our zinc rich paints & sprays contain 91-92% zinc metal in the dft, the zinc metal purity being 99% +, pass 500 hrs+ of salt spray test. all these tests are carried out by reputed third party analytical labs, accredited to nabl. .
gold spray paint
250 - 265 Per Piece
anti-reflective coating
Get Price Quote
Buyers can approach us for acquiring the best quality Anti-Reflective Coating! We are prominent Manufacturer, Exporter, Importer and Supplier of Anti-Reflective Coating in Maharashtra, India. Anti-Reflective Coating that we offer is made from a qualitative material as per stated quality norms. Further, buyers can get it at nominal rates, from us. We do single layer MgF2 coating and multi-layer BBAR coatings on both glass and plastic lenses. Our plastic lens coating has a special anti-scratch layer that improves the scratch resistance of the bare plastic. We have recently acquired the Satisloh SP-100 Sputter Coating System. The SP-100 is a precision sputter coater developed and sold by Satisloh GmbH. The SP-100 has a Silicon Sputter target and creates Broadband coatings through the alternate deposition of Silicon Nitride and Silicon Oxide layers. The Sputter Coating Chamber is particularly known for extremely hard and durable coatings and for very high levels of repeatability that allow for accurate deposition of multi-stack coating formulae. Some of the coatings that we offer are : Standard BBAR Coating : This is the typical coating for most visible or NIR applications. Ravg<0.5% from 400 to 700 nm. This can be extended to any 300nm range such as 550-850 for NIR applications. We do this coating on glass and plastic lenses. Ultrawide BBAR Coating : This is a newly developed coating that covers the entire visible and NIR range simultaneously. Ravg< 0.8% for 400 to 940 nm. Dual Band Coating : Here we provide low reflection over the entire visible range as well at any specific wavelength outside this range. This is typically used in Night Vision and other defence applications. Ravg< 0.5% for 400 to 700 nm and R<0.5% at 1064 nm. Single Layer MgF2 coating : We also offer single layer MgF2 coating on our old chamber. This is the typical traditional lens coating that gives good result on glass, especially high index glasses. It is also durable and cheaper than BBAR coatings. The curve below is for the high index glass N-LAK34.
Talc and Putty Powder
Get Price Quote
Talc is an all-purpose inexpensive filler powder for all resin types for creating a cheap but heavy gap filler. Also used in resin casting to reduce cost, shrinkage & heat generated by resin curing.
Waterproof Coatings
250 Per Kilogram
Oxide Cement Colour
Get Price Quote
Oxide Cement Colour, cement fibre board, CPVC Cement, Fire Cement
Oxide Cement Colour
Get Price Quote
Nickel Plating Chemicals, Zinc plating, Silver Plating Chemical
Epoxy Floor Paint
Get Price Quote
Rangoli Colors
Get Price Quote
Amino Silicone Emulsion
Get Price Quote
silicone emulsion for mold release, silicone water repellents
Industrial Paints and Powder
Get Price Quote
We provides all industrial liquid paint and Powder of Berger / KNPL make.
Acid Proof Paints
Get Price Quote
We are offering acid proof paints. two components, air drying finish paint specially designed for highly corrosive acidic environment. It gives excellent resistance to splash & spillage of 30% concentrated sulphuric acid. It is generally used in traction batteries & in industries of very high acidic environment. description colour – selected colours gloss – glossy volume solids – approximately 48 % dry film thickness/coat – 35 to 45 microns theoretical coverage – 12 to 14 m2/ litre at 35 microns 8 to 10 m2/ litre at 45 microns mixing ratio – 4 : 1 ( by volume) base: hardener flash point - not below 21° c drying time - touch dry- 1 hour hard dry- 6-8 hours full cure- 7 days over coating interval - 12 hours
Amino Silicone Emulsion
Get Price Quote
Paint Thinners
Epoxy Paints
Get Price Quote
Epoxy Paints, polish papers, polish
exterior wall painting
Get Price Quote
exterior wall painting, exterior house painting
Distemper
Get Price Quote
Distemper, Industrial Paints, Enamel Paints, Emulsion Paints
Epoxy Enamel
Get Price Quote
Epoxy Enamel, coating powder, Acrylic Exterior Emulsion Paint
Epoxy Enamel
Get Price Quote
VCI PROTECTIVE FILM, Milk Adulteration Kit, Lab Chemicals
Cement Paints
Get Price Quote
Cement Paints, g i fitting, Paints, Building Materials
cement wall putty
Get Price Quote
Cement, steel, White Cement
Cement Wall Putty
Get Price Quote
Paint Thinners, g p thinner
Bison Zinc Phosphate RSP Primer
Get Price Quote
Bison Zinc Phosphate RSP Primer
powder coating paints
Get Price Quote
powder coating paints, non toxic paints, PU Paints, Industrial Paints
aviation paint strippers
Get Price Quote
aviation paint strippers, graffiti cleaning product