Suresh Indu Lasers Pvt Ltd Hadapsar, Pune, Maharashtra

Description The UV Laser Marking with its wavelength 355nm is suitable for marking plastics (ABS, PA) due to a high repetition rate. The UV laser wavelength is suitable and versatile in marking a wide range of materials and is perfect for “cold marking” applications where heat zones are not allowed.   UV Laser mark at very high speeds which are indispensable for short cycle times in industrial manufacturing environments. With high peak powers they are most suitable for fine marking and structuring without thermal impact on glass applications and/or ceramics.   The UV laser marking will mark plastics and silicon materials without the need of additives and will also mark glass with drastically reduced risk of micro fracture. The excellent beam quality also affords this laser the ability to be utilized in micro marking applications such as electronics, circuit boards and microchips in addition to solar panels and precise medical marking applications.   They also provide an excellent quality for classical laser marking applications and micro material processing.   Features: Small beam diameter and fine marking line Good quality and high laser beam stability Complete machine stability, simple and easy operation Narrow pulse width, small heat affected zone, work-piece without damage Suitable for sensitive material as cold light source Laser directly acting on molecular chain with maximum extend to avoid thermal effect It works stably, applied in superbly precise marking, such as: LCD, wafer, chip ceramic, sapphire, precise surface marking of other materials,3C electronics, Lamps, food package, wire rod ,leather, ceramic, PCV, glass, Phone case, medicine bottle, fine marking on glass substrate, electric appliance marking and so on.

Laser Wavelength : 355 nm

Laser cutting after they were introduced in the 19th century, the fashion designers are widely adopting laser cutting in garment manufacturing. In synthetic fabrics, laser cutting produces well-finished edges as the laser melts and fuses the edge, which avoids the problem of fraying produced by conventional knife cutters.   Furthermore, use of laser cutting is increasingly used for leather due to the precision of cut components. In fashion accessories such as jewellery, laser cutting can be used to produce new and unusual designs to produce a fusion of apparel design and jewellery style.   In laser cutting a laser is used to cut the fabric into the desired pattern shapes. A very fine laser is focused on to the fabric surface, which increases the temperature substantially and cutting takes place due to vaporization. Normally gas lasers (CO2) are used for cutting of fabric. The cutting machine includes a source of laser, a cutting head fitted with mirrors to reflect the laser beam to the cutting line, a computer to control the entire system and a suitable mean for removing the cut parts. The application of inert gases (N2, He) during cutting prevents the charring and removes debris and smoke from the cutting area. Like the mechanical cutting devices, a laser beam does not become blunt and need sharpening. Automatic single ply laser cutters are faster (30–40 m/min) than automatic multiple ply knife cutters (5–12 m/min). However, while cutting multiple plies, knife cutters are faster per garment cut and also cheaper.   The limitation of laser cutting is the number of lays of the fabric that can be cut by the beam. Best result is obtained while cutting single or a few lays, but the accuracy and precision is not obtained with several plies. In addition there is a chance of the cut edges to be fused together especially in case of synthetics. In some cases the sealing of the edges of cut patterns and sewn garment parts is essential to prevent fraying, where the laser plays the role. As in garment production facilities emphasis is given in multiple lay cutting, the laser cutting seems unlikely to become widespread. However, it is successfully used in cutting of sails where single ply cutting is the norm and a slight fusing of the edge of synthetics and woven materials is desirable. In addition, laser cutting is used in some areas of home furnishing. Laser cutting is cheaper compared with the traditional cutting methods.   Furthermore, as the laser cutting doesn’t have mechanical action, high precision of the cut components at high cutting speed are feasible. The laser cutters are safer and include simple maintenance features, which can be operated for longer duration. The laser cutters can be integrated to the computer technology. It can produce the products at the same time when designing in the computer. Laser cutting machines have faster speed and simpler operation. Laser cutting machines are suitable for cutting textile fabrics, composites and lather materials. They can operate for a wide range of fabric, which is not possible with die cutters. Hence, laser cutting machines are gradually been accepted in garment manufacturing.

Cutting Speed : 0-30000 Mm/min

Laser Type : Co2 Dc Glass Tube / Rf Metal Laser Tube

Description: SILROBOWELD it is modern 2 to 6 kw laser welding delivers high quality, high precision weld that is not possible with conventional CO2 welding. Fiber laser technology allows to processes different types of thickness and materials, including similar and different material. SILROBOWELD operates in standard laser safety booth to protect user from shorter wavelength emitted by fiber laser. SILROBOWELD its takes higher level of precision and productivity using fiber laser processes material such as brass, copper, and aluminum. Fiber laser technology is with unmatched beam quality and electrical saving, due to this requires less maintains to oscillators to generate beam. In SILROBOWELD teaching is done with inline CCD camera which is easy , fast and accurate teaching of welding path. Another key featuresis rotating mirror in welding head, which helps to rotate beam direct path of welding, it can make any shape of laser beam like 8, O, line (vertical or horizontal)

Country of Origin : India

Type : Welding Robot

Certification : CE Certified, ISO 9001:2008

Application : Industrial

Condition : New

Power : 1-3kw, 3-6kw, 6-9kw

Brand Name : SIL

SIl 3D 6axis Robot fiber laser cutting machine can be adopted with multiple automations that iclude gantry and double sided gantry system.Fixtures and automation gives and advantage as to excellant dynamic response and lower weight.The SIl robotic cutting system adopts world class robot from Fanuc or YASKAWA integrated with Fiber laser source and best of designed cutting head.This machine performs well with its high precision, high efficiency and low noise when running at full capacity. SIL 6-Axis laser cutting machine is used in precisely cutting 3D parts with complex surface. Specially suitable for cutting covering parts of automobile and aviation industry, such as edge and hole cutting. It can replace the traditional trimming die and piercing die. It can realize 3D parts’ high quality, high precision and high efficiency cutting, without needs of secondary processing.   Features: Free movement with greater reach at 270 degree angle Advanced Laser cutting head with auto focusing Suitable to Edge cutting of Hydro formed parts of Automobiles Auto tracking system Expert in 3D Cutting with arbitrary curve 6-axis mechanical arm gives four times more output Advantages Stable and reliable light path system and control system Imported original fiber laser generator with great and stable performance, lifespan is over 100,000 hours High cutting quality and efficiency with cutting speed up to 85m/min with smooth cutting edge   Application Area: Mainly used in 3D precision cutting of aviation, automobile industry, construction machinery , mould, fitness equipment and sheet metal processing, etc flexible laser manufacturing system is made up of advanced international FIBER laser, 6-axis industrial robot and control system. It meets well the demand of quenching, tempering, normalizing, alloying, cladding etc.   This 3D robot laser cutting machine is specially for cutting thin metal ,such as carbon steel,stainless steel,brass,aluminum ,etc

Country of Origin : India

Certification : ISO 9001:2008 Certified, ISI Certified

Automatic Grade : Fully Automatic

Condition : New

Speciality : High Precision Cutting, Robust Design

Usage : Industrial, Metal Cutting, Laser Cutting

Description: Suresh Indu Lasers introduces new product this year. This laser product has best application in field of metallurgy and is now manufactured in India. Laser cleaning machine 20W – 1kW for de-rusting metal and restoring the metal to obtain same physical and chemical behaviour of the metallic elements. Laser cleaning system removes the contaminated layers of the metal through exposing it to a focused laser beam. Materials mostly used for laser cleaning are Aluminium (Anodized/Polished/Cast), Stainless Steel/ Mild Steel, Titanium, Copper, Brass, Nickel, Galvanized Metals, Multi-Coated Materials, Painted Metal Alloys, Plastics, Polypropylene/Poly-carbonate, Cast Iron and Chrome, Chrome, Carbide, Rubber and PVC. Cleaning Head is portable and it operates with precise deflection and position of the laser beam. The head provides good stability with pressurised water cooling to the optics and dust proof.

Country of Origin : India

Color : White

Weight : 2000-4000kg

Q-switched fiber lasers are capable of providing pulse energies in the mJ range, but for materials processing applications requiring multiple Joules of pulse energy at multi-kilowatt peak powers IPG has developed the unique Quasi-CW Fiber Lasers. These fiber lasers occupy the space between kW class CW fiber lasers and Q-switched pulsed lasers. They are very similar to kW class fiber lasers with one notable difference: their peak power during ON time is up to tenfold higher than their average power in pure CW mode of operation. Thus, these lasers can provide tens of joules of energy over a long pulse, from 50 microseconds to 50 milliseconds.   Feaatures Laser power from 75 W to 2.3 kW. Peak power will be ten times more than actual power. Fully automated and IOT 4.0 enabled.

This Nd : YAG laser spot welding machine uses ceramic spotlighting cavity from England that has higher reflectance, higher power, very long life. As a proven model in the market, this machine has mature technology and stable performance, and is a volume-selling machine for over four years. The machine comes with high power chiller which keep the systems running for longer time. Special long table is provided with ball-Screw based  Z- Axis for precision & easy positioning of jobs & also movement during welding Applications Precision injection die-cast, module fixing metal decoration Parts precision stamping Parts welding Fix flushing sluice Aluminum casting Stainless products

Country of Origin : India

Type : Laser Welding Machines

Certification : ISO 9001:2008, CE Certified

Condition : New

Automatic Grade : Semi Automatic

Power : 3-6kw, 1-3kw

Usage of Li-Ion battery is increasing exponentially in various sectors such as mobiles, automobile, defense, aerospace, etc.   SIL has recently developed battery welding machine for Li-Ion batteries. These batteries are made of prismatic containers having materials like Al, Al alloy, SS or OFHC Copper. These machines are used for welding can-caps, terminals, fill tubes, tabs, etc. The components can have thicknesses from 0.5 mm upto 3 mm.   Type of Lasers that can be used are either CW or QCW fiber Laser. The machine produces positioning accuracy of better than 10 µm and positioning speed > 18 m/min.   Other important features are welding process monitoring thru video camera, power ramping & pulse shaping, welding head with wobble motion, seam tracking with path compensation to name a few.

Country of Origin : India

Type : Laser Welding Machines

Certification : ISO 9001:2008, CE Certified

Condition : New

Automatic Grade : Fully Automatic

Power : 1-3kw

Laser micro machining techniques are currently used by the automobile and medical industries as well as in the production of semiconductors and solar cell processing. Lasers for micro machining offer a wide range of wavelengths, pulse duration (From femto second to microsecond) and repetition rates (from single pulse to Megahertz). These attributes allow micro-machining with high resolution in depth and lateral dimensions.   The field of micro-machining includes manufacturing methods like drilling, cutting, welding as well as ablation and material surface texturing, whereby it is possible to achieve very fine surface structures ranging in the micrometer domain. Such processes require a rapid heating, melting and evaporation of the material. The use of extremely short nano- and pico-second and even femto-second pulse duration helps to minimise the thermal effects such as melting and burr formation thus eliminating the need for any post processing measures.   Features: Type of Lasers: QCW Fiber, Nano Second, Pico Second, Femto Second, UV, IR or Green Applications: Micro Cutting, Micro Hole Drilling, Micro Milling, Dicing, Ablation, Engraving, Etching Flexible design for all your micro machining requirements. The system can be configured as per your Requirement. 2 D plannar cutting with precision focus adjustment for dicing, stealth dicing or ceramic cutting Accuracies up-to 1micron for 100mm travel. Special air bearing slides for higher accuracies Add rotary axis for micro tube machining Add short focus plannar Lens Close loop scanner for submicron machining of precision parts Add Trepanning for micro hole drilling from 0.25mm or lower & up-to 1mm.

Description: SIL laser engraving machine is versatile & finds application in signage, indoor & outdoor advertisement, art & craft, gift, shoes, toys, garments, model cutting, papers & packaging, wood & MDF cutting industry, interior, decorators and many more. SIL built laser engraver which is engineered & manufactured in india. SIL laser systems can be configured with two types of lasers, Glass Tube & Metal Tube. Glass Tube: The glass tube lasers are of very high quality, compact and come with warranty period of 6 months. Metal Tube: All metal tube lasers are RF excited with option of water cooling. Metal tube covers a warranty of 24 months. SIL series incorporates DSP based stand alone control system for offline work with 32 mb file space & easy to use printer driver software. The machine can print directly from AutoCAD, CorelDRAW, Photoshop etc. Printing real pictures, deep engraving, gradient engravings are the main features. High speed belt drive plotting unit with precise micro stepping drives. Rotary, Image Auto Tracing Camera, Two Laser Head, Four Laser Head, Honey comb are optionals Working table: 1300 X 2500 mm/ 1200 X 1200 mm/ 1300 X 900 mm/ 600 X 900 mm/ 600 X 400 mm.   Features: High cutting precision and positional accuracy Improved edge quality and surface finish Higher repeatability Advanced laser tools for material processing applications Drilling and engraving in addition to cutting Negligible work piece degradation Cost-effectiveness Minimal thermal stress zone Shapes High Speed belt drive plotting unit with precise micro stepping drives Red beam pointer Z- Axis (Optional)

Features: Laser cleaning machine for de-rusting metal and restoring the metal to obtain same physical and chemical behavior of the metallic elements. Laser Power from 20W to 1 kW based on materials and applications. Laser cleaning system removes the contaminated layers of the metal through exposing it to a focused laser beam. Materials mostly used for laser cleaning are Aluminum (Anodized/Polished/Cast), Stainless Steel/ Mild Steel, Titanium, Copper, Brass, Nickel, Galvanized Metals, Multi-Coated Materials, Painted Metal Alloys, Plastics, Polypropylene/Poly-carbonate, Cast Iron and Chrome, Chrome, Carbide, Rubber and PVC. Cleaning Head is portable and it operates with precise deflection and position of the laser beam. The head provides good stability with pressurized water cooling to the optics and dust proof. It can work offline and can be used immediately after power on. Collimated laser beam output, beam size customizable (default 4mm). The cleaning head is extremely light weight, 650gms only (not include delivery cable), can be operated by hand for a long time. Patented red light assisted focus technology, can adjust the focus position according to different focus lenses. Wireless control, can realize parameter setting and emission control remotely and update parameters at any time. Trolley-type chassis design, can be carried on high-speed train and flight easily with 30 kg full weight. Super integrated injection molding chassis, cushioning design, stable structure wearable, shockproof and drop resistance.   Materials mostly treated with Laser Cleaning Machine are Aluminum (Anodized/Polished/Cast), Stainless Steel/ Mild Steel, Titanium, Copper, Brass, Nickel, Galvanized Metals, Multi-Coated Materials, Painted Metal Alloys, Plastics, Polypropylene/Poly-Carbonate, Cast Iron and Chrome, Chrome, Carbide, Rubber and PVC.

Country of Origin : India

Color : Light White

Weight : 13.2 Kg

Characteristics: High Quality Laser cavity with life more than 8 to 10 years before service. Laser power feedback controller. Stable optical performance round the clock. Maintenance free Lamp operating life more than 400 hours or personalized design with ergonomics principles. Fast, efficient, deep, little distortion, little heat-affect area quality welding, welding points free from pollution, saves energy.   Features: The energy, pulse width frequency and light spot size can be adjusted to achieve different welding effects. The parameters are adjusted by the lever in the sealed cavity, which is simple and highly efficient. Ceramic converging cavity is imported from Britain. Jewellery Laser welder is corrosion resistant and high temperature resistant, and has 8-10 years’ service life. Uses the most advanced light shielding system to eliminate the irritation to eyes by light during working. Able to work round the clock with same stable performance. Maintenance free operation for 10,000 hours. Ergonomics – Based design avoids fatigue even after long time working. Jewellery Laser welder is widely used in aviation, Aerospace, Sports Products, Jewellery, Golf head, Medical instruments, Titanium alloy dentures, Instruments, Electronics, Machinery, Automobile etc. It is specially used for perforating Gold and Silver jewellery, Spot welding, Repairing, Inlay and welding of claw.

Features: As per the market trends, customer requirements and immense experience in marking systems, we manufactured Enclosed Jewellery Laser Marking System for jewellery industry. With our machine, you can mark on gold, silver, platinum, copper, stainless steel and much more materials. Gold Laser Marking Machine is provided with optional rotary attachment which computer controlled round axis movement through software. The Rotary attachment is necessary for laser marking on rings, bracelets and all round or curved objects. The perfect and precision round scale guarantees perfect position of markings, even on particularly curved surfaces. Optional dust collector attachment available for collecting any precious particles which will be fixed to enclosed marking machine body.

Power : 20 W to 100 W

The handheld laser welding machine combines quality of laser with flexibility of traditional welding to user’s advantage. The handheld laser welding machine is very easy to operate, which offers perfect welding seam without usage of any consumables at a fairly fast welding speed. The handheld laser welding machine can replace the traditional argon welding and electric welding.   Features: High laser energy density, small thermal effect area, no deformation, less or minimal subsequent processing. Easy spot welding and continuous welding. Non-contact processing, stress free, noiseless, no pollution to the environment, Good welding quality, smooth and beautiful appearance, high welding speed, high strength. Weld strength and toughness equivalent or stronger than the base metal.   Advantages: Fast welding speed, 2~10 times faster than traditional welding. The welding seam is smooth & beautiful, small taper, doesn’t need polish, save time. No deformation or welding scar, firm welding of the work piece. Laser welding has no consumables, low power consumption and long service life. Safe, easy operation and more environment friendly.   Applications: The handheld laser welding machine can be used for welding stainless steel, copper, aluminum, gold, chromium, silver, titanium, nickel and other metals or alloys, it can also be used for a variety of welding between different materials, such as: copper – brass, titanium – molybdenum, titanium – gold, nickel – copper and so on Handheld laser welding machine is widely used in the kitchen cabinets, staircase elevator, shelf, oven, stainless steel door, window guardrail, distribution box, medical equipment, communications equipment, battery manufacturing, craft gifts, household and other industries.

SIL Fiber Laser Metal Cutting Machine – Flexi model 3015 size with laser power of 1000 W or 1500 W power. It can cut Mild Steel, Stainless Steel, Coated Stainless Steel, and High-Strength steel, Aluminium, Brass, and Nickel easily.   The machine features a durable rack-and-pinion motion system, lightweight gantry with synchronized dual servo motors. Fiber Laser energy saves up to 70 percent as compared with traditional CO2 laser cutters, It can provide cutting speed to 20 m / min and rapid speed of 80 m/ min with 0.8 G acceleration.   Features: Designed to work in harsh conditions. All mechanics designed for more than 20 years life. Cut part accuracy +/- 50 micron. Machine up time more than 90%. Best Service support from Highly Experienced Engineers. Backup Laser source within warranty and post warranty. Best Application support. Service cost < 3% per annul. Strong welded base frame. Special Grade Material thick plate for mounting Linear Guide and Rack. Light weight Gantry for High dynamics. Original SIL brand Linear guides and Block. Low backlash Gearbox from SIL brand. Fire proof Bellow for protection. New Generation Control System. SIL brand CNC controller. SIL brand Motor Drives. Acceleration 0.8 G. IPG laser source. Single Pallet Table. (Option of Dual Pallet). Cutting Speeds up to 20 meters/min. Rapids up to 80 meters/min. 150 mm Z stroke giving more clear space for stationary pallet. Control panel: All switch gears from Siemens, Isolated HV protected specially build to work in Harsh Electrical conditions

The handheld laser welding machine combines quality of laser with flexibility of traditional welding to user’s advantage. The handheld laser welding machine is very easy to operate, which offers perfect welding seam without usage of any consumables at a fairly fast welding speed. The handheld laser welding machine can replace the traditional argon welding and electric welding.   Handheld laser welding machine is widely used in the kitchen cabinets, staircase elevator, shelf, oven, stainless steel door, window guardrail, distribution box, medical equipment, communications equipment, battery manufacturing, craft gifts, household and other industries.   Features: High laser energy density, small thermal effect area, no deformation, less or minimal subsequent processing. Easy spot welding and continuous welding. Non-contact processing, stress free, noiseless. Good welding quality, smooth and beautiful appearance, high welding speed, high strength. Weld strength and toughness equivalent or stronger than the base metal.   Advantages: Fast welding speed, 2~10 times faster than traditional welding. The welding seam is smooth & beautiful, small taper, doesn’t need polish, save time. No deformation or welding scar, firm welding of the work piece. Laser welding has no consumables, low power consumption and long service life. Safe, easy operation and more environment friendly.   Applications: The handheld laser welding machine can be used for welding stainless steel, copper, aluminium, gold, chromium, silver, titanium, nickel and other metals or alloys, it can also be used for a variety of welding between different materials, such as: copper – brass, titanium – molybdenum, titanium – gold, nickel – copper and so on.

Country of Origin : India

Type : Laser Welding Machines

Certification : ISO 9001:2008, CE Certified

Condition : New

Automatic Grade : Manual

Power : 1-3kw

Laser pipe cutting machine incorporates space saving design and ease of use. Its high cutting speed and very low operating cost makes the most affordable system on the market. The light weight motion system allows excellent positioning accuracy while maintaining cutting speeds that are the highest in its class.   The application is for cutting Mild Steel pipe, Stainless Steel pipe, Aluminium Alloy pipe, copper pipe, Brass pipe ( Square pipe, Round pipe, Rectangular pipe, C Channel, H Channel ), etc.,   Features: Can add 2 Chuck and 3 Chuck options with unloading. Can cut square, rectangle, round shapes & open channels like C, H, L shapes and special sections capabilities. QR code scanning system to controller helps to retract right parts and design to be loaded and avoid mistakes and errors from machine operator. Works independently with pipe buldle loader without profile management problems. Auto loading feature is enabled with belt traction system. Unloading trays are at the part delivery point to collect parts and scrap tray for easy scrap collection. Pnematic rollers support for square, rectangle and round shape tubes for 20 – 220 φ mm. TubePro controller is installed to process 3D & 2D profiles cutting for both single and entire production batches. Tube Lite nesting software is used for nesting. Optional automation with robotic arm loader for continous loading of tube or pipe can be integrated. Predefined parameters for different types of profiles with respect to thickness and materials. Real zero tailing for zero wastage to process complete tube. 6X speed piercing feature for faster production with 70% more efficiency. Auto lubrication is enabled in machine to reduce smooth functing without wear and tear. Safety enclosed body with high capacity fume extractor attached to the machine to reduce fumes, dust and spark which eye irritation.   Applicable Industries: Fitness equipment, sporting goods, petroleum pipelines, construction machinery, passenger car manufacturing, Locomotive manufacturing, agriculture and forestry machinery, special vehicles, households appliances manufacturing, laser external processing services and other machinery manufacturing pipe process industry. Auto feed enable for perfect slicing of the job. Finished job command offer to cut pipes without wastage. Cut cross section to slice the pipe in desired location and also reduce the waste to minimal amount. Hiding a layer enable to reduce lower number of outer slice Pneumatic or electric job holding provide proper position of the pipe in 3 Dimensions. Tube types Round, Oval & Rectangular Efficient cutting of square and rectangular section with a slide way mounted cutting head. Low noise levels and the very best cut quality. The optimum working parameters for the best possible machine performance. The material feed system and vice geometry assure the most positive clamping of the material during the cutting cycle whether the material is thin wall delicate tube or tough thick wall tube. During the material feeding process, the material is lifted away from the vice bed and vice jaws to prevent the material surface being marked or scratched. Cutting line has been designed to operate either as stand alone system or fully integrated in a complete automatic line controlled by one CNC programming unit.

Brand Name : SIL

Metal Sheet – Pipe Fiber Laser Cutting Machine is an example of high-tech flexibility 3D axis cutting. The system blends beam-modulation technology to automatically match material thickness with the power and speed of a rotary index to efficiently transition from flat sheet to tube or pipe cutting. This switch between flat-sheet cutting and tube or pipe cutting is accomplished in less than 2 min., and the system’s ability to process round, square, rectangle, C-channel and angle iron provides users with extreme versatility.   The beam-modulation technology allows for a continuous variable beam across every thickness of material without having to change lenses, while ensuring fast throughput. As the material thickness increases, so, too, does the diameter of the laser beam and the width of the cut, enabling easy removal of finished parts.   The Combo system Metal Sheet – Pipe Fiber Laser Cutting Machine is widely used in kitchen appliance, electrical panel box, mechanical systems, electrical manufacturing, elevator manufacturing, and auto parts, hardware, Structural Steel Plants etc.   Material Such as Stainless Steel, Mild Steel, Galvanized, Zinc – Coated Steel, Aluminium, Brass Sheet & Pipes are processed in Combo system.   SIL combo model comes with specification of fiber laser 1000w to 4000w power, includes 160 & 220 diameter maximum pipe cutting. 300mm Z-axis range with 1500×3000 mm sheet size.   Features: Add Rotary Axis Choice of 165 mm & 220 mm Chuck Get Manual or Electro-Pneumatic Chuck Easy to use CNC controller Basic CAM software comes with the free upgrade Cut cross section to slice the pipe in desired location and also reduce the waste to minimal amount Combo model with 3 Meter pipe and plate cutting Combo model with 6 Meter pipe and plate cutting Plate structure base Atlanta Racks Class 4 Laser Protection Covers Laser Powers up to 4 KW Yasakawa Servo Motor and Drive System (Double) Cypcut CNC controller FS 3000 Acceleration 0.5 G Same Height Pallet Exchange Table Auto Focus Cutting Head Cutting Speeds up to 20 meters/min Rapids up to 60 meters/min Linear guide and rail from Taiwan

Power : 380/50 V/Hz

Description Laser marking system is an industrial marking tool integrated with laser marking software to control the galvanometer scanners that produce relative motion between the laser spot and the work-piece.   Laser and optics are heart of the machine, control marking mechanisms system.   Industrial Marking can be done almost too various products and applications with variety of combinations characters and graphics, logos, unique serialised alphanumeric, or one of a number of different bar-code designs. Which are used for all kinds of products for its tractability, anti-counterfeiting, material, batch or manufacturer identification etc.   Laser marking is a device for marking physical surfaces, without physical contact, using laser energy. Laser marking enable editing the mark data (letters and graphics) on a computer, using graphic utilities. In addition to marking, It is  also used widely for detailed processing on metal surfaces.   Laser markings are used in a variety of industries, such as printing 2D codes on automotive parts, logos on electronic components/electrical devices, lot numbers, Automotive parts, Electronic components/ electrical devices, Machines/tools, Semiconductors/LCDs, Molded parts, Medical instruments   MOPA Fiber Laser Common fiber lasers and solid-state lasers use mirrors to resonate and amplify the laser. The laser is output by Q-switching. Using this technology, it is difficult to produce a reliable, durable laser with high quality and -flexibility. MOPA all-fiber laser eliminates the resonator structure, and enables a high quality beam with stability, durability and – flexibility.   Features: Attachments like Rotary, On-Fly, Auto Trace available based on customer requirement. Permanent Marking Processing / Online- Marking Process.Laser marking is perfect for products which are manufactured and requires store record, identify record, process management, and other critical information. It will not wear off or peel off, because it is marked directly into the product. Direct marking process with no contact with material minimize damage to the product and enhance the fine quality in detail processing and Marking. Laser marking is high speed process marking faster for large production industry is adopted in large scale. Less Operating Cost, zero maintenance cost. The electric bill is really just about the only operating cost. Wide Range of Materials and processing some possible materials include metals, plastics/resins, plastic film, and so on. Labelling data can include logos, graphics, model numbers, serial numbers, 2D codes, and more. Environment-friendly Processing/Marking There is no ink, and therefore no solvent; no adhesive label, and therefore no backing paper, no waste disposal.

Power : 20 W to 100 W

Indian railways which is the fourth largest railway network in the world by size, with 121,407 kilometres of total track over a 67,368-kilometre route and over 18million passengers and 2 million tons of freight traffic per day. On its rail network of 63,327 km, Indian Railways runs more than 200,000 wagons and 50,000 carriages pulled by more than 8,000 engines; it also runs 6,909 stations and has over 1,400,000 employees, which makes it the third biggest employer in the world.   Railway coach side walls and roofs SIL recently commissioned an innovative SCW 2.5X25 automatic laser cutting and welding system to produce side walls and roofs for its passenger wagons. This is a sheet cut and weld system designed and customised by SIL as per client’s specifications. SCW stands for “Sheet Cut and Weld”, 2.5 indicates the maximum weld length,25m indicates the maximum welded sheet length that the system can be handle. The machine produces semi-finished parts which is used for manufacturing railway coach sidewalls and roofs including windows and doors of the coaches.   SCW 2.5X25 machine consist of Cutting and Welding base table with gantry and dual Z-axis of cutting and welding, Machine Enclosure, Control panel, Chiller, Fume Extractor, Raw Sheet Loading Table and finally Sheet rolling table. The sheets are rolled out automatically from trimming-welding station and cutting station with the help of two rollers at both station which will sandwich the sheet and move the sheets towards sheet rolling table. This operation is done be servo motors due which we can get the exact position of the sheet without any error.   Features: Laser welding station 2.5 x 22 m. Laser Welding Head Includes Wobbler, Seam Tracker and Monitoring System 3 Kw Fiber Laser with Dual Beam Switch Facility. Laser Cutting Station 2.5 x 4 Mtr. CNC Laser Weld-Cut System up to 26 meters length. Camera based real time part to part coordinate measurement, helping accurate cutting for long length sheets. Laser including 2 Fiber Cable & 2-way beam switch(Time Sharing) Advanced welding head with seam tracker Wobble Welding Head (Optional)

Country of Origin : India

Certification : ISO 9001:2008 Certified

Automatic Grade : Fully Automatic

Condition : New

Speciality : High Precision Cutting, Robust Design

Power : 380 V/ 50 HZ, 380 V / 60 HZ

New Integrated laser system with pro features of 6X piercing speed with precise beam quality possessing high Laser power up to 20kW ensuring maximum reliability and productivity based on the type of material to be processed having benefit of minimal maintenance. We have wide range of Fiber Laser cutting machines integrated with EtherCat, Beckhoff, FANUC controllers & finest quality laser beam source of SIL OEM, IPG, FANUC of high laser power having variety in different working areas.   SIL machines have other features of vision cameras for monitoring the cutting process, pallet exchange, operator console with sheet clamping mechanism which secures sheet while cutting process. The special CNC advance controllers option prevents collision with anti detection and high speed Z Axis retraction on no sheet underneath or nozzle touch. QR code scanning system & compatible nesting software from Sigmanest, Lantek and Metallix also fall under advance features which we supply. We provide some additional features such as Auto Nozzle Exchanger, Auto Nozzle Cleaner, Nozzle Beam Centring, Slat Conveyor (Optional).

Features : Making moulds and tools are expensive, and their service life can be shortened by wear & tear, damage and corrosion. Laser welding can significantly increase the life of moulds and tools with the help of laser deposition welding. Laser systems from SIL feature excellent performance and flexibility. With our robust and high-performance laser welding devices, which allows to weld complicated structure that are difficult or impossible with traditional welding technologies, even in the immediate vicinity of sensitive materials, such as plastic or glass. The good control of laser energy and exposure ti me allows welding of metallic materials with high melting temperatures and high thermal conductivity. Even it can weld different metals.   Applicable to Materials & Fields Tool Steel   Cold Work : 1.4718, SKD11, Dell, Dc53. High Speed : 1.3348, SKH 55. Hot Work : X25CrMoS, SKD61, DHA1, DH2F. Plastic Work : 1.2311, S45-50-SSC, P-20, NAK80 Px4, Stavax, M300. Gray Cas􀆟 ng Iron – GG 20, GG 25,(FC), GGG 40, GGG 50, GGG 60, GGG 70L, GGG, 90(FCD).   Special Materials – Super alloys, Colmonoy, Stellite, Duplex Stainless steel, Aluminum, Titanium, Inconel alloys, Hastelloy, Ni-Resist, Magnesium, Molybdenum, Nickel, Silver, Tin, Zinc, Silver, Gold. Special Process – Etching, Mirror finishing.   Advantages: 4 – Axis (3 rotational + 1 height) movement machine helps you to reach every part in any angle. Predefined welding parameters will hep you save ti me and give accuracy in welding. The welding spot diameter is 0.2 mm – 2.0 mm with high accuracy. No effect for etch after welding, low oxidation rate, the color of the processing parts is intact. No stomata or sand hole appeared after welding. Can process at the welding point, especially applicable to repairing mould requiring polishing. The processing parts can reach 50 – 60 rockwell hardness.

Weight : ≤ 400kg

Laser Type : Pulse

Laser cutting after they were introduced in the 19th century, the fashion designers are widely adopting laser cutting in garment manufacturing. In synthetic fabrics, laser cutting produces well-finished edges as the laser melts and fuses the edge, which avoids the problem of fraying produced by conventional knife cutters. Furthermore, use of laser cutting is increasingly used for leather due to the precision of cut components.   In fashion accessories such as jewellery, laser cutting can be used to produce new and unusual designs to produce a fusion of apparel design and jewellery style. In laser cutting a laser is used to cut the fabric into the desired pattern shapes. A very fine laser is focused on to the fabric surface, which increases the temperature substantially and cutting takes place due to vaporization.   Normally gas lasers (CO2) are used for cutting of fabric. The cutting machine includes a source of laser, a cutting head fitted with mirrors to reflect the laser beam to the cutting line, a computer to control the entire system and a suitable mean for removing the cut parts. The application of inert gases (N2, He) during cutting prevents the charring and removes debris and smoke from the cutting area. Like the mechanical cutting devices, a laser beam does not become blunt and need sharpening. Automatic single ply laser cutters are faster (30–40 m/min) than automatic multiple ply knife cutters (5–12 m/min). However, while cutting multiple plies, knife cutters are faster per garment cut and also cheaper. The limitation of laser cutting is the number of lays of the fabric that can be cut by the beam. Best result is obtained while cutting single or a few lays, but the accuracy and precision is not obtained with several plies.   In addition there is a chance of the cut edges to be fused together especially in case of synthetics. In some cases the sealing of the edges of cut patterns and sewn garment parts is essential to prevent fraying, where the laser plays the role. As in garment production facilities emphasis is given in multiple lay cutting, the laser cutting seems unlikely to become widespread. However, it is successfully used in cutting of sails where single ply cutting is the norm and a slight fusing of the edge of synthetics and woven materials is desirable. In addition, laser cutting is used in some areas of home furnishing. Laser cutting is cheaper compared with the traditional cutting methods. Furthermore, as the laser cutting doesn’t have mechanical action, high precision of the cut components at high cutting speed are feasible.   The laser cutters are safer and include simple maintenance features, which can be operated for longer duration. The laser cutters can be integrated to the computer technology. It can produce the products at the same time when designing in the computer. Laser cutting machines have faster speed and simpler operation. Laser cutting machines are suitable for cutting textile fabrics, composites and lather materials. They can operate for a wide range of fabric, which is not possible with die cutters. Hence, laser cutting machines are gradually been accepted in garment manufacturing.

Laser Type : Co2 Dc Glass Tube / Rf Metal Laser Tube

Color Laser Marking Machine used to coloured parts are commonly used from decorative applications in a wide range of consumer goods and marking of these parts is generally achieved though the removal of the coloured anodised layer to reveal the base aluminium material either a white or silvery mark depending on process conditions. Commonly used in gift-ware and consumer goods, alphanumeric and marketing logos are typically marked.   The use of lasers for colour marking is not a particularly new technique as it has been recognized for over 10 years. This technique was originally identified as a viable process for use on craft metal work and jewellery. However, the process has had very little commercial impact in the intervening years. There is now a greater interest in this process as manufacturers of consumer goods are looking for new techniques and finishes to provide product differentiation. This application note looks at a variety of materials that are colour mark-able including titanium and stainless steel, and explores the benefits and parameters of the pulsed fiber laser in relation to this application area.   Benefits: Significant improvement in the quality of the mark due to the stability and controllable of the laser source. Beam intensity and spot size enable the use of small mark widths. Output power stability over time enables complex mark patterns without power fluctuations – no weld defects. High power density allows large marking areas to be processed rapidly. Maintenance free (no replaceable parts). 3-Dimensional marking can be easily achieved. High repetition rate is achievable. Low frequency (<20 kHz) – control of heat input; processing of thermally sensitive plastic can be controlled (increase in heat might cause the plastic to melt). Low M² – the depth of field is high.   Features: Integrated Cooling Solutions Enhanced Optical Tolerances Enable Plug and Play High Reliability/ Stability – Standard 1 year warranty Enhanced Interfaces can be used in combination For Greater Flexibility And Advanced Pulse Control Extended Hardware Control I/O Serial Control via RS-232 and Ethernet First And Last Pulse Equally Usable Bitmap Marking Compatible Status Monitoring And Safe Shut Down High speed marking (MHz repetition rate)