Surge Protection Device Dealers in Kalewadi, Pune

• Supply voltage: 3 Phase, 415 VAC +-10% 50Hz
• Mounting: DIN RAIL
• Dimensions: 63(W) X 72(H) X 114(D) ,mm.
• Trip Time delay: 50 msec.
• Output: Two Potential free Relay contact of 5A rating
• Output Contacts: Two Change over .( C- NO- NC),Rating 5 A at 230 VAC

Protection of 3 Phase devices against Over voltage, Under voltage,Single Phasing, Reverse Phasing & unbalance supply are one of the major issue in electrical systems. For safe running of 3-phase devices, special protections that keep a continuous watch on supply conditions are very essential. The major cause of maximum load burn-out is overloading which occurs due to unbalance supply, Single Phasing & Reverse Phasing conditions. VMR3P detects such Conditions & protect the load from burn out. 'PROTON's LVM 3P' offer above protections along with 3 digit display showing R-Y,Y-B,BR voltages in scanning mode with precise accuracy. LOW/HIGH voltage tripping to ensure trouble free running of 3-phase Loads. Additional auxiliary supply not required.     Latest micro controller based technology. Wide range of supply variation. Unit also works with one phase is present. Additional auxiliary supply not required. Protection against Under voltage. Protection against Over voltage. Single Phasing & Reverse Phasing protection. Reverse Phasing Protection can be bypased through settings. Trip delays for all protections. Set Parameters are easy to handle with simple trimpot.   LED indication for status of relay & Power.

• Usage: Industrial
• Brand Name: Elpro
• Model: DC - 904
• Tested for Ingress Protection: 55
• Display: Analog
• Mode: Semi Automatic

• range: 120-650 Volt

Surge Arrester is specifically designed to protect utility, agricultural and industrial installations and equipment in the 120-650 Volt range from over-voltages caused by lightning discharges. It is available in both single and three phase application. The arrester complies with ANSI standard C62.11-1987. It is not a substitute for lightning rods, or other devices intended to protect people and property against a direct or nearby lightning stroke.

home protectors, Power Ups, power wheels battery, Electric Inverters

• Type: DIN rail module, two-section, divisible
• Color: traffic grey B RAL 7043
• Brand: Phoenix Contact
• Model Name/Number: VAL-MS-EE-T2-3+1-320 - 2910575
• Degree Of Protection: IP20 (only when all terminal points are used)
• Dimensions: 90 x 71 x 64.7 mm
• Horizontal pitch: 4 Div.
• Ambient temperature (operation): -40
• Altitude: < 2000 m (amsl (above mean sea level))
• Permissible humidity (operation): 5 %
• Shock (operation): 25g (Half-sine / 11 ms / 3x +-X, +-Y, +-Z)
• Vibration (operation): 5g (10
• IEC power supply system: TN-S
• Mounting type: DIN rail: 35 mm
• Housing material: PA 6.6
• Degree of pollution: 2
• Nominal voltage UN: 240/415 V AC (TN-S)
• Nominal frequency fN: 50 Hz (60 Hz)
• Maximum continuous operating voltage UC (L-N): 335 V AC
• Maximum continuous voltage UC (N-PE): 260 V AC
• Rated load current IL: 80 A
• Residual current IPE: < 5 uA
• Standby power consumption PC: < 450 mVA
• Nominal discharge current In (8/20) us: 20 kA
• Maximum discharge current Imax (8/20) us: 40 kA
• Follow current interrupt rating Ifi (N-PE): 100 A
• Short-circuit current rating ISCCR: 25 kA
• Voltage protection level Up (L-N): < 1.6 kV
• Voltage protection level Up (L-PE): < 1.9 kV
• Voltage protection level Up (N-PE): < 1.5 kV
• Residual voltage Ures (N-PE): < 0.4 kV (at In)
• TOV behavior at UT (L-N): 415 V AC (5 s / withstand mode)
• TOV behavior at UT (N-PE): 1200 V AC (200 ms / withstand mode)
• Connection method: Screw connection
• Max. backup fuse with branch wiring: 125 A (gG)
• Screw thread: M5
• Stripping length: 16 mm

Single Phase Home Protector, Clean Air System, electronic inverter

Analog Home Protector

home protector, Water Pump

Lightning Arrestors