Surge Protection Device Dealers in Pune

• Type: Preventive Device
• Brand Name: Ureka
• Material: Metal
• Preice: 3200/pcs and 20% discount on 10 Pcs

Our entire range is made to go through to extreme quality control checks to make sure they adhere to standards of global management systems. Backed by a productive network, our company is able to cater to buyers all over Pune(India) and other Pune(India)s with ease.

• Feature: As Per The Industry Standards
• Brand Name: power defence

• Brand Name: u protec
• Material: Steel
• Application: ligthning arrester
• Country of Origin: India

• Type: Type 1
• Phase: Three Phase
• No.of Poles: 1P+N
• Highest Voltage Protection: 600V
• Max Discharge Current: 120 KA
• Frequency: 60Hz
• Degree of Protection: IP20
• No of Spikes: 5
• Size: 4.5 feet (Height)

• Type: Type 1
• Brand Name: Yash
• Phase: Single Phase
• No.of Poles: 1P+N
• Highest Voltage Protection: 240V
• Max Discharge Current: 240 V

• Brand Name: U-PROTEC
• No.of Poles: 1P+N
• Spikes: 4/5
• Highest Voltage Protection: 240V
• Phase: Single Phase
• Length: 1200 mm
• Rod Diameter: Globe
• Globe Diameter: 25 mm

11 kv, 22 kv, 33 kv, various type of lightning arestor are available, these are also available in copper material

High & low voltage cutt-off short circuit protection overload protection two phase protection [ 440 volt ] low voltage bypass switch high voltage test switch volt meter one minute delay time.

IONIFLASH MACH protects against all lightning strikes, positive or negative, by activation of the internal system released by atmospheric induction. The ionization created at the coaxial spark gap top by generation of electric arcs, in a fraction of a second, increases the conductivity of the air and the speed of the propagation of the upward leader. Being propagated towards the cloud, this discharge, generates an electric field.

The focus of this study is to enhance the Electrical safety of a facility against lightening strikes and achieve compliance to IS 62305.After implementation, SASPPL will prepare a compliance statement and set of as built drawings for inhouse and statutory records.SASPPL also undertakes a short training of maintenance team and a classroom tour of IS 62305 to make them self sufficient on requirements of standard and how they are achieved in plant.The whole process is executed under guidance of a chartered electrical engineer with over 30 years of field experience. 

• Weight: 50gm,100gm
• Packaging Type: Box ,Carton
• Material: Mild Steel,stainless steel
• Application: industrial ,lab

• Supply voltage: 3 Phase, 415 VAC +-10% 50Hz
• Mounting: DIN RAIL
• Dimensions: 63(W) X 72(H) X 114(D) ,mm.
• Trip Time delay: 50 msec.
• Output: Two Potential free Relay contact of 5A rating
• Output Contacts: Two Change over .( C- NO- NC),Rating 5 A at 230 VAC

Protection of 3 Phase devices against Over voltage, Under voltage,Single Phasing, Reverse Phasing & unbalance supply are one of the major issue in electrical systems. For safe running of 3-phase devices, special protections that keep a continuous watch on supply conditions are very essential. The major cause of maximum load burn-out is overloading which occurs due to unbalance supply, Single Phasing & Reverse Phasing conditions. VMR3P detects such Conditions & protect the load from burn out. 'PROTON's LVM 3P' offer above protections along with 3 digit display showing R-Y,Y-B,BR voltages in scanning mode with precise accuracy. LOW/HIGH voltage tripping to ensure trouble free running of 3-phase Loads. Additional auxiliary supply not required.     Latest micro controller based technology. Wide range of supply variation. Unit also works with one phase is present. Additional auxiliary supply not required. Protection against Under voltage. Protection against Over voltage. Single Phasing & Reverse Phasing protection. Reverse Phasing Protection can be bypased through settings. Trip delays for all protections. Set Parameters are easy to handle with simple trimpot.   LED indication for status of relay & Power.

The Lightning Arresters, offered by us, are acclaimed for their make & durability. Our organization has a team of competent workers to make sure accurate quality control of products is done in order to ensure purchaser's quality demands are met. Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Lightning Arresters.

• Material: Ceramic, Fiberglass, Resin
• Shape: Disc
• Color: Brown, Off White
• Condition: New
• Puncture Power: 0-50Kw
• Application: Control Panels
• Certification: CE Certified
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Standard: DIN, ETDC
• Type: Standard Micron,100 Micron,250 Micron
• Tensile Strength: 0-25Mpa, 100-125Mpa, 125-150Mpa, 150-175Mpa, 175-200Mpa, 25-50Mpa, 50-75Mpa, 75-100Mpa
• Warranty: 1year, 2years, 5years
• Size: 1mtr
• Size: 2 mtr
• Size: 3 mtr

Compliance with Standards : IEC 61643-1 , Type 1 as well as Type 2 tests, Maximum current discharge Imax : 65kA, 40kA, 15kA,8kA, Type 2 withdrawable Surge Arrestors, Voltage protection level Up < 1.5kV.

• Brand Name: Elpro
• Material: Aluminium
• Phase: Single Phase
• Class: B
• Power Source: Electricity
• Max Voltage: 650 Volt
• Minimum Voltage: 120 Volt

A surge protector is an electrical device commonly used to protect computers and related computer components from power surges. To fully understand what a surge protector does, you must first understand what a surge is. The typical electrical wiring found in homes (in INDIA) and offices, carries a standard voltage of 230 volts. If a spike or surge in the voltage occurs, causing the voltage to surpass the norm, damage can occur to the computer equipment. Electrical surges can occur from a number of sources, namely: lightning and the basic surges that occur while turning on the motors and compressors for refrigerators and air conditioners to name a few. A spike is a brief increase in the voltage intensity and a surge is an increase that endures a bit longer than a spike. In either case, the voltage increases generally endures for less than a second. Surge protectors can prevent many of the problems resulting from spikes and surges. A surge protector, often set up in strip or box form, contains a number of receptacles to plug equipment into. The surge protector itself is then plugged into a standard outlet. While it serves the basic purpose of giving homeowners and business owners additional receptacles to put to use, the greater impact of surge protectors is measured in terms of the protection they offer if a surge occurs. Though surge protectors come in all shapes, sizes, and price ranges, the typical model will route the increased voltage present during a surge to a grounding wire housed within the surge protector, thus allowing the normal 120 volts to continue on to the components plugged into the protector. Some models also have a fuse within the surge protector. These models work much the same way as a fuse or circuit breaker within a standard home or office electrical panel. When a surge occurs, the protector will route the increased voltage to the grounding wire, but if the voltage is too great, it will blow the fuse and the power to the computer components, for example, will be terminated. Though the computer lost power, at least it is protected and able to function once the surge protector fuse is replaced. EMERSON TVSS are the product unbeatable in that class of technology. Please go through the catalogue attached understand more about EMERSON TVSS.

INTRODUCTION: Indotech Introduces the Surge Protection Device For the Power Line. This Document Introduces about the Brief Description of technical specifications, installation, inspection,application and the maintenance of Surge Protection Devices of Surge Protection Devices of Class B and Class C and Combo.   The First Stage of the protection provided before the equipment at mains distribution panel is called as Class B type .This type of the Protection shall be provided against the LighteningElectromagnetic Pulse(LEMP) and other high surges at the Power Distribution Panel. The Device is designed and manufactured to handle the lightening current pulses of 10/350 . The class B Protects the AC Power System against the Lightening. This is the Separate Wall Mounted System which is to be installed at the Power Input Point at the ACDB/LT Panel. This equipment consists of the Class B Protection Device and the Protective MCB of suitable rating with the Proper termination of the Line, Neutral and Earthling Connections. Following table shows the technical specifications of the Class B Protection Equipment.This type of protection device is provided against the low voltage surges at the equipment input level connected between line and neutral . The Device is designed and manufactured to handle the lightening current pulses of 8/20 . The class C Provides the protection for the appliances in the AC Power System against the Low voltage surge . This is the Separate Wall Mounted System which is to be installed near to appliance or the sensitive equipment but at the minimum 15 meter distance from the class B Protection. This equipment consists of the Class B Protection Device and the Protective MCB of suitable rating with the Proper termination of the Line , Neutral and Earthling Connections. Following table shows the technical specifications of the Class C Protection.  

• Feature: High Energy Handling Capability.

Polymer Surge Arresters are Light Weighted, Hydrophobic in nature and finds application in both indoor and outdoor systems for the protection of Electrical Equipments. Conforms to IEC 60099-4 High Energy Handling Capability Hydrophobic silicone polymer Excellent Cantilever and Tensile Performance.

• Type: DIN rail module, two-section, divisible
• Color: traffic grey B RAL 7043
• Brand: Phoenix Contact
• Model Name/Number: VAL-MS-EE-T2-3+1-320 - 2910575
• Degree Of Protection: IP20 (only when all terminal points are used)
• Dimensions: 90 x 71 x 64.7 mm
• Horizontal pitch: 4 Div.
• Ambient temperature (operation): -40
• Altitude: < 2000 m (amsl (above mean sea level))
• Permissible humidity (operation): 5 %
• Shock (operation): 25g (Half-sine / 11 ms / 3x +-X, +-Y, +-Z)
• Vibration (operation): 5g (10
• IEC power supply system: TN-S
• Mounting type: DIN rail: 35 mm
• Housing material: PA 6.6
• Degree of pollution: 2
• Nominal voltage UN: 240/415 V AC (TN-S)
• Nominal frequency fN: 50 Hz (60 Hz)
• Maximum continuous operating voltage UC (L-N): 335 V AC
• Maximum continuous voltage UC (N-PE): 260 V AC
• Rated load current IL: 80 A
• Residual current IPE: < 5 uA
• Standby power consumption PC: < 450 mVA
• Nominal discharge current In (8/20) us: 20 kA
• Maximum discharge current Imax (8/20) us: 40 kA
• Follow current interrupt rating Ifi (N-PE): 100 A
• Short-circuit current rating ISCCR: 25 kA
• Voltage protection level Up (L-N): < 1.6 kV
• Voltage protection level Up (L-PE): < 1.9 kV
• Voltage protection level Up (N-PE): < 1.5 kV
• Residual voltage Ures (N-PE): < 0.4 kV (at In)
• TOV behavior at UT (L-N): 415 V AC (5 s / withstand mode)
• TOV behavior at UT (N-PE): 1200 V AC (200 ms / withstand mode)
• Connection method: Screw connection
• Max. backup fuse with branch wiring: 125 A (gG)
• Screw thread: M5
• Stripping length: 16 mm

• Type 1+2 Rated Impulse current Iimp : 12.5kA/ 25kA & 50/100kA for N/PE Maximum discharge current Imax: upto 50kA Voltage protection level Up < 1.5kV Compliance with Standards : IEC 61643-1 , Type 1 as well as Type 2 tests• Type 2 withdrawable Surge Arrestors  Maximum current discharge Imax : 65kA, 40kA, 15kA,8kA Maximum continuous operating voltage Uc: 340V Voltage protection level Up: ≤ 1.5kV Compliance with standards: IEC 61643-1class 2, EN 61643-11 type 2

The Electrical discharge that occurs between earth and air, is felt by thunder and a strong light. The electric load cells are formed in the clouds. As soon as load cells pass over the low air resistance, the electrical discharge occurs and the loop is completed. Hence Lightning is safely earthed.As per statistics, every minute, more than 1,900 lightning flashes fall out over earth's surface. Besides the prevention methods against lightning, there are also methods to safeguard public and industrial places. The external protection system are used for this purpose and there are 3 major types. They are Lightning Conductors Systems (ESE conductors).

• Feature: Optional fully copper/High grade copper bonded steel construction

Our system is single point grounding system. We design lightning arrester to give maximum protection against direct lightning strikes.Charge dissipation technology uses the point discharge principle to facilitate the dissipation of a build-up of static charges. The sole purpose of static dissipation product is to reduce the accumulation of electrical charges and thereby prevent an electrical arc or an electrical current flow that can cause damage.This same technology has been successfully applied to the lightning protection industry by developing product line that can be mounted on the structures to reduce the accumulation of ground charge.