Surgical Equipment Dealers in Sadashiv Peth, Pune

• Driven Type: Electric
• Capacity(Litre per minute): 5 LPM
• Brand Name: Niscomed
• Type: Portable
• Weight (in Kg): 5
• Material: Plastic

• Type: Upper Arm
• Brand: BPL
• Usage/Application: Hospital
• Measurement Method: Fully Automatic
• Display: LCD
• Pressure Measurement Accuracy: +-3%
• Minimum Pulse Measurement Range: 4 Beats/min

• Parameter Measures: SpO2 + Pulse Rate
• Brand Name: Nulife Medtech
• Display Type: Dual Color LED
• Feature: Bluetooth, Digital
• Oximeter Accuracy: Good

• Measurement Range: 0-300 mmHg
• Voltage: 6 V
• Usage/Application: Hospital
• Pulse Rate: 30-200m +/- 5%
• Storage Humidity: 10%-85% RH
• Display Type: LCD Digital Display

simply placing transformer in autoclave vessel under vacuum will not remove moisture form that. For evaporating water into steam latent heat of water is to be supplied.when transformer put in to the autoclave for drying heat energy is transferred to transformer via convection and radiation. Compared to convection energy transfer by radiation is very low. During vacuum drying as air is sucked out there will not be any transfer of heat by convection. This necessitates heating by hot air of sufficient duration,before vacuum drying in the autoclave vessel by externally either by thermic fluid heating systemelectric heating systemsteam heating by means of radiator coils inside autoclave or limpets welded outside the autoclave..

Technical data Applicable for the refrigerants R717 (ammonia, Nh3), HFC, HCFC (e.g. R22, R134a, R404a) and other refrigerants dependent on sealing materials compatibility within a temperature range of -30°C/+100°C Flammable hydrocarbons are not recommended.    Pressure setting range : 10-25 bar (145-363 psig) the valve is designed for strength test : 40 bar (580psig). Leakage safety: Same as set pressure. For further information please contact your local Castle Sales Distributor.   Important : The CSRVA safety relief valve is dependent on the back pressure (if the back pressure is higher than the atmospheric pressure, the opening pressure will be higher than stated set pressure) Special circumstances such as vibrations (which should be avoided) and oscillating pressure may require an increased difference between the operational pressure and the closing pressure.   Pressure Setting : The operating pressure of the plant should be at least 15% below the set pressure. This allows a perfect re-seating of the safety relief valve after having been activated. .   Temperature Range : -30/+100°C.

• Size: 100ml, 150ml, 200ml, 250, 275ml, 60ml
• Type: Infusion Pumps
• Material: PVC DEHP Free, Non PVC, PVC
• Certification: ISO9001:2008
• Application: Medical Use
• Color: Blue, Gray, Green, White, Yellow
• Number of syrenges: 1, 2, 4, 6

We are engaged in supplying of medical oxygen cylinders, which are used for various industrial applications. These are portable medical oxygen cylinders for emergenciesfirst aid, extremely handy & easy to use. apart from these, we also provide flow meter and pre-heaters. These humidifier bottles are also called as gas purifiers. In order to operate and open the nozzles of the industrial gas cylinders, we offer a wide range of high quality adjustable spanners. These are manufactured using high grade raw material and are available in various customized designs.

Easy To Handle Rust Free (Strong Cylinder) Easy To Operate &Amp Store

• Material: BOPP, PTFE Fabric, Textured Paper
• Application: Clinic, Hospital, Laboratory & Pharma, Sealing
• Color: Brown-yellow, Creamy, Creamy-brown, Off White, White
• Adhesive: Acrylic Based, Hot Melt Adhesives, Nature Rubber, Pressure Sensitive, Silicon
• Adhesive Side: Double Sided, Single Sided
• Feature: Acrylic Based, Hot Melt Adhesives, Nature Rubber, Pressure Sensitive, Silicon
• Design Printing: Offer Printing, Plain
• Certifiacation: ISI Certified, ISO 9001:2008 Certified

The outer chamber is made of heavy gauge stainless steel Inner chamber, Lid, support ring & support legs are made of complete stainless steel ( 304 grade ) dully polished. Unit is supplied with Radial locking system, Pressure gauge, spring loaded safety valve, water inlet, water outlet, steam release valve, water level assembly, paddle lifting arrangement. Control box fitted with Pressure control switch, low water cut off,

• SHR IPL headpiece wavelength: Standard Equipment 530
• energy density: 1-50cm2
• Spot Size: 15-50mm2
• RF Frequency: Maximum 1500 ml
• yag leaser energy: 10 Mhz
• Feature: Operational fluency,High strength,Compact structure,Light in weight,Corrosion resistance,Permanent Hair Removal Skin Rejuvenation Removal,Fast Treatment Frequency up to 10 Hz
• Big sopt size: 15x50mm 10x15mm and 12x30 spot size available

• Features: Flexible shaft, User friendly design, Long battery backup
• Specifications: Motor with MCB (90 watt), Foot control, Flexible Shaft, Stand & Base, Tool Kit, Special Container

• Shape: Round
• Feature: Durable, High Accuracy, Optimum Quality
• Display Type: Analog
• Machine Weight: 10-20kg
• . Weighing Capacity: 150kg

• Parameter Measures: SpO2 + Pulse Rate
• Brand Name: Microtek
• Model Number: OX - O7
• Warranty: 6 Months
• Country of Origin: Made in India
• Packaging Type: Box

Immersion Heaters For Horizontal use (Re-wireable, Bobbin type) : - These heaters are made of M.S. /S. S. pipe welded to Cast Iron / Stainless Steel threaded flange which is fitted with a replaceable refractroy insulated heating element inside.Uses :- To heat water, oil, food stuff, alkaline solutions, anodising and plating baths etc.