Temperature Transmitters Dealers in Bhosari, Pune

• Accuracy: ± 0.5% F. S.
• Types of Input: Dedicated
•  : • RTD (Pt-100 / PT-200 / CU-53) 2 or 3 wire • Thermocouple (J / k type)
• Type of Output: 4-20 mA DC, 2 wire non-isolated
• Calibration Range: Factory Calibrated
• Power Supply: 24 V DC, external
• Power Consumption: < 40 mW
• Response Time: < 500 msec
• Temperature Coefficient: ± 0.01% peroC
• Enclosure: Epoxy Mould
• Dimensions: 45 mm (Ht) x 30 mm (Dia)
• Mounting: Head Mounting
• Weight: 250 gms
• Operating Conditions: Temperature 0 to 55oC / Humidity 5 to 95% non condensing

• Output: Signal span 4...20 mA, 2-wire
• Power Supply: 24 VDC
• Storage Temperature: -55 to +90 C
• Diameter: 44 mm
• Operating temperature: -40 to +85 C
• Minimum span: 25 C
• Pitch: 19 mm

  TEMPERATURE TRANSMITTER Series 4400-TX Features RTD / Th/C input Two wire system 12 - 36 V DC supply Reverse polarity protected With & without local indication 3 ½ digit LCD display optional Span - Zero adjustment provided externally Monitor facility without breaking loop Available in flameproof field mounting CMRI certified enclosure

• Brand Name: Protocontrol Instruments

We offers head mounted temperature transmitters for processing signals from rtd and thermocouples. These transmitters are small, sleek, reliable and accurate. The range of the transmitter is field programmable and can be easily programmed at site. Special models having pc communication facility with the help of hart protocol are also available. temp. Transmitters are generally head mounted and fitted in the head of temperature sensor. Module size of the temperature transmitter is designed such that it can well be fitted in all common heads of temperature sensors. salient features include complete isolation between input and output. These transmitters are loop powered type. an led provides a visual indication of sensor fault and programming mode. These transmitters are simply ranged and calibrated on the bench by using a single on board push button switch without need for soldering links. Digital technology ensures accurate and drift free linearization to common curves, providing a level of performance not possible with earlier analogue type transmitters. these transmitters are extensively used in cement, fertilizer, chemical, and processing plants.

• Output: 4 - 20 mA
• Features: Pocket friendly price , Easy to install, Durable.
• Working Range: 0-20m/s
• Response Time: Typ. 4 sec. or typ. 0.2 sec.
• Power Supply: 24V AC/DC +- 20 %
• Current Consumption: Max 150mA
• Electrical Connection: Screw Terminals max. 1.5 mm
• Angular Dependence: Less than 3 % of measurement
• Probe Length: 200 mm

• Accuracy: < 0.1 % FSR
• Model Name/Number: 2202
• Degree of protection (EN 60529): IP 40
• Humidity: < 98 % RH , condensing
• Long-term test (transmitter): IEC 770 6.3.2
• Vibration (sinusoidal) (EN 60068-2-6): 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
• Damping: 0.0 … 30 s , programmable
• Output signal: 4 … 20 mA , 2-wire
• Temperature drift: < 0.003 %/K , typ. < 0.01 %/K , max.
• Load resistance: R = (U - 8 V)/23 mA
• Resolution: 12 bit
• Up/Down scaling limits: 23 mA / 3.5 mA
• Ripple immunity: 3 Vrms
• Power-up time: ≤ 10 s
• Power supply: 8 … 35 V DC
• Reverse polarity protection: Yes
• Effect of variations in supply voltage: < 0.01 %/V
• TAG No.: 15 characters
• EMC: EN 61000-6-2,EN 61000-6-3, EN 61326-1
• Namur: NE21
• Explosion protection: ATEX II 1G Ex ia IIC T5/T6 ATEX II 3G Ex nA IIC T5

Temperature Transmitter, Electric Actuator, Circular Chart Recorder

atx isorail universal temperature transmitter, BAUMER PRESSURE SWITCH

Temperature Transmitters, Temperature Sensors

Temperature Transmitters, Pressure Transmitters, Gauges, Sensors

Temperature Transmitters, Pressure Gauges, Pressure Transmitters

Temperature Transmitter, Boilers, Control Valves, Boiler