Testing Equipment Dealers in Akurdi, Pune

• Precision: 0.01 mm
• Display Size: 1.8
• Battery Life: 3000 hrs
• Display Mode: May be switched to inch or metric
• Item: Good working condition

Included in delivery -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'   Technical data subject to change without prior notice. Probe tips The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. The probe tips of course are compatible to all HAIMER 3D-Sensors.

• Open Circuit Voltage: 0to5KVOR0to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
• Precautions: Voltage on test terminals. High Voltage on test jig appears only after the variac is set to zero and gradually increased. There is a trip device to trip if the current increases than the required value
• Trip settings: The tripping can be reset by a pot which can be varied as peruse requirement
• Open Circuit Voltage: 0 to 30 KV OR 0 to 100 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 5 mAto 50 mA OR 10 mAto 100 mA
• Accuracy Of Reading: ±2%
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz
• Open Circuit Voltage: 0 to 5 KV or 0 to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
•  : Protection provided with zero start to prevent accident availability of High

FEATURES : • Display in Lux • Precise & easy readout. • High accuracy in measuring • Data Hold & Light Sensor • LSI circuit use provides high reliability & durability • Auto zero Adjustment • Photo Detector : One silicon photodiode with filter. • Permits a wide range of light measurements • Low Battery Indication • Compact, light weight, & excellent operation • LCD display can clearly read out even in High Ambient Light • Separate LIGHT SENSOR allows user take measurements at an optimum position.   ACCESSORIES: Instruction Manual, Carrying Case, Battery  

• Mounting Type: Top / Side
• Indicator System: Bi-colour Roller/Follower Capsule
• Housing for Indicator: Bi-colour Roller –SS Housing Follower Capsule – Glass Tube in Aluminium / SS Housing
• MOC of Indicator: SS 304
• Float Chamber: 50NB Non Magnetic Standard pipe
• MOC of Float Chamber: SS 304, SS 316, SS 316L, PP, PVDF, Others on request
• Scale: Aluminium / SS / Acrylic engraved in mm
• Process Connection: Flanged in various Sizes
• Vent: 1/2 INCH Plugged / 1/2 INCH Ball Valve
• Drain: 1/2 INCH Plugged / 1/2 INCH Ball Valve

• Type: Surface Resistivity Meter
• Condition: New
• Model: z205-100
• Brand Name: Sharang
• Display: Digital
• Usage: Laboratory
• Weight: 200 g

Surface Resistivity Meter offered to comprise battery operated meters that provide functioning as the portable instrument for measuring the surface resistivity of flat surfaces. These find use in the circuit industry for checking products like component storage bags, workbench surfaces, conveyor belts and others which come with resistance values and require meeting stringent specifications.

• Operating Temperature: 50 Degree C-
• Weight: 0.82 Kg
• Repeatability: +/- 0.15%
• Brand: Graco
• Flow Range: 57 lpm
• Battery Life: 6 to 12 months
• Maximum Working Pressure: 10.3 MPa
• Storage Temperatur: -25 Degree C
• Battery Type: 2 AA Alkaline

We have emerged in offering our clients a comprehensive range of Static Charge Meter SCM-01. These devices are used for locating instrument and measuring electrostatic charges encountered in plastic, paper, packaging, textiles, pharmaceutical, electronic items. Moreover, these are also used for  critical electronic assembly and storage areas and anti-static work stations.

• APPLICATIONS: Automotive,Household Appliances,Gas,Heating,Hydraulics ,Refrigeration
• Condition: New
• Minimum Order Quantity: 1 Piece

• Country of Origin: India
• Type: Humidity Test Chambers
• Certification: ISO 9001:2008
• Application: Temperture Humidity Testing
• Color: White
• Voltage: 220V
• Condition: New
• Power: 3-6kw
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1year
• Automation Grade: Automatic
• Brand Name: LAXO
• Power Supply: AC

Vickers Hardness Tester provided by PG Corporation is capable of measuring the hardness of precision metallic parts. The testing range of this Vickers Hardness Tester varies from degrees of hard to soft. The Vickers Hardness Tester is an efficient piece of machinery providing an accurate reading. Testing Range Varies from degrees of hard to soft Features Sturdy designAccurate readingAutomated loading systemBuilt in projection screen

• Type: Electronic Meters
• Certification: ISI Certified
• Application: Control Panels
• Color: Grey, White, Black
• Frequency: 45Hz
• Automatic Grade: Fully Automatic, Semi Automatic
• Power Source: Electric
• Warranty: 1year

Backed with rich experience, we have carved a niche for ourselves in the Indian and international markets as the Exporter and Supplier of the best grade of Industrial Meters. Procured from the reliable entities with consistently even track record, these reasonably-priced Meters are characterized by low wear and tear, appropriate functionality and high endurance properties. By choosing right shipment mode, we timely cater every consignment.

• Load Range: 250 to 3000 kgf in stages of 250kgf
• Max. test height: 380 mm
• Dept. of throat: 200 mm
• Machine height ( approx ): 1185mm
• Net Wight ( approx ): 450 kg.
• Drive Power: 0.66 HP
• Mains supply: 415V, 50Hz, 3phase
• Measuring accuracy with CCD camera and built in optics: 0.01 mm
• Dwell timer: 1 to 99sec.
• Raising/lowering: 240 mm/min
• Testing Table 200mm Ø: 1 No.
• Testing table 70mm Ø: 1 No.
• Ball holder 5mm: 1 No.
• Ball holder 10mm: 1 No.
• Test Block HB-5/750: 1 No.
• Test Block HB-10/3000: 1 No.
• Allen Spanner: 4 Nos.
• Telescopic cover for elevating screw protection: 1 Set
• Instruction Manual: 1 No.

The Fluke 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. A high voltage probe that allows a multimeter to measure up to 6,000V.Intended for low energy applications only One year warranty

watthour meters, Temperature Instrument, Wind Power Inverters

• Colour: White
• Height: 1200 - 1600 mm
• Type: Automatic
• Working Pressure: 400 bar

• Application: Industrial Use
• Display Type: Digital
• Phase: 3 Phase
• Mounting Type: Panel Mounted
• Condition: New
• Brand: Multispan
• Usage: Industrial
• Model: AVH 14N
• Power Supply: Auxillary
• Measurement Lines: 6 digit

We are offering vickers hardness testers. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard & their accurate results are widely acclaimed. These testers strictly conform to is 1501 & iso 6507.

The IV curve tracer SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both of a single module and of module strings. Thanks to The IV curve tracer SOLAR I-V, the operator can test the photovoltaic system and, should it give a negative result, immediately identify the problems of the system in order to promptly solve them. The IV curve tracer SOLAR I-V is provided with the remote unit SOLAR-02 for measuring irradiation and temperature. The synchronization between main unit and remote unit, by radio-frequency (RF) wireless connection, guarantees the necessary simultaneity of measurements. The IV curve tracer SOLAR I-V also manages a database of photovoltaic modules, which can be updated at anytime. The measured IV characteristic is not affected by the resistance of the measurement cables, as it is carried out with the 4-terminal measuring method. The measured values, correctly reported at standard test conditions, are immediately compared with the values declared by the manufacturer to give the OK /NO result of the test. The operator must not do any calculation, the instrument carries out the comparison rapidly and automatically 

In the course of operation, keeping track of trap performance and repairingreplacing leaking or waterlogged trap becomes unfeasible due to the large number of traps installed.

• AC Voltage: 50V,100V,250V,500V,1000V
• DC Voltage Accuracy: 50V,100V,250V,500V,1000V
• Minimum Order Quantity: 2 Number

Gas flowmeter for measurement of gas flow in industrial applications.high pressure or low pressure,high flow or low flow,high and low temperature all line size.

• Type: Table-Top
• Display Type: 3 Digit LED display
• pH Range: 0 to 14.00 pH
• Accessories: Combination pH Electrode, Dust Cover, Manual, Electrode Stand
• Voltage Supply: 230 V A.C.

Offering you a complete choice of products which include auto karl fischer titrimeter, digital flame photometer, digital ph meter, uv-vis spectrophotometer, double beam uv-vis spectrophotometer and microprocessor ph meter.   We are offering Digital pH Meter of top-notch quality & are fabricated utilizing raw material & modern technology. Feature: High stability and accuracy ATC facility Slope control

• Automation Grade: Automatic
• Display Unit: Bar, Kpa
• Model Number: LT-3000V
• Weight (kg): 10
• Accuracy: 0.035 Pa
• Minimum Order Quantity: 1 Piece

Texlab bring forth a commendable range of Crease Recovery Tester. This testing equipment is manufactured in compliance with industrial parameters. Texlab products are highly accredited for their incomparable attributes as compared to other products in the market. Customers can avail them in multiple sizes and specifications as per the client’s demands.Accurate determination of recovery properties of fabrics against creasing, Specimen loading device and standard weight supplied for hands-on- use.

• Automation Grade: Automatic
• Voltage: 415 V , 3Phase
• Display Type: PC/HMI
• Frequency: Adjustable  
• Impulse Pressure: Adjustable
• Temperature: Adjustable 
• Weight: Based on order

• Application: Food and Beverage Industry
• Body Material: Plastic
• Usage: Laboratory

• Automation Grade: Semi-Automatic,Automatic,Manual
• Color: Black,Silver,Grey,White,Red
• Voltage: 220V
• Driven Type: Electric
• Condition: New,Used
• Features: High Quality,Precise Design,Optimum Performance