Testing Equipment Dealers in Bhosari, Pune

• Frequency: 50 Hz
• Phase: Single phase
• Output Voltage: 0-3 kV, 6 kV
• Power Supply: 230V AC + 10%

BTU 100 L is a versatile compact energy totalizer extremely useful for measurement of energy conversion. It measures the thermal energy required for air conditioning. It accepts 3 inputs, each one from a flow meter for chilled water, inlet temperature sensor and the outlet temperature sensor. From this it calculates the thermal power and energy consumed in maintaining the temperature at given level. 9 digits are available for total energy and four digits are available for instantaneous power reading. The engg. Unit can be selected by user, either as KW & KWH Or BTU / Hr & BTU Advantages : • Compact Wall mounting design with IP 65 Enclosure.• 16x2 LCD for total energy as well as instantaneous power.• Display of chilled water flow, power temperature available.• Choice of mounting either on inlet or on outlet as per site conditions.• Choice of Engg. Units : KW or BTU.• Data storage up to 1 year with hourly storage facility with real time.• Storage can be viewed by scrolling keys.• Serial Interface with computer through MODBUS RTU.     BTU Meter For heat transfer application, SERIES : HET-100L • Suitable for Thermic fluids like HYTHERM 500, HYTHERM 600, DOWTHERM A,    DOWTHERM T etc. • Output in terms of 4-20mA which is proportional to Power obtained. • Communication Port (supports MODBUS-RTU) & Data Logging facility. • Password protection on all programming modes (except display mode) to avoid   wrong programming by an unauthorized person. • Display of 16 x 2 Big Characters LCD with BLUE Backlight. • Buzzer indication for faults/Error with blinking LED (Programmable). • Fault Conditions - Indicated by different Error Codes. • Accuracy of ± 0.25 % of Full Scale. • Ingress Protection: IP65 Equivalent

• Application: Industrial
• Power: Manual Operation
• Material: Mild Steel
• Usage: Bulk Density Testing for Metal Powders
• Upper diameter: 12.5 x 12.5 mm
• Upper diameter: 12.5mm*12.5mm

• Size: Multisizes
• Type: Water Testing Meters
• Material: Plastic
• Color: Green
• Feature: Accuracy, Digital Water Meter Display, Multi Jet, Spiral Water Meter
• Application: Industrial, Residential

We have adopted different payment procedures for the attainment of complete client satisfaction. The Water Testing Meter, delivered by us, is highly appreciated for its efficiency and long life. In online payment procedure, the procedure depends on the processor model or gateway; both of them ensure complete security. Adhering to global quality management methods, our range of product is of unmatched standards.

• Shape: Round
• Application: Commercial
• Finishing: Polished
• Feature: Durable Finish, High Strength, Highly Corrosion
• Usage: Preparation of rubber sheets.
• Advantage: Easy to Operate

Rubber Lined Vessels, Tanks, Piping etc.Rubber lining : The process of rubber lining is divided in to the following steps. Preparation of the base surface. Preparation of rubber sheets. Application of the rubber sheets on the metal surface. Vulcanization Testing & Inspection Surface Preparation :This is very important process for rubber lining. The surface of the metal must be free from oil, paint, scales, rust etc. this is generally removed with the help sand blasting/ shot blasting. After the surface is cleaned, adhesive or bonding agent is applied to surface. Two or three coats are applied, as adhesion is an important process for rubber lining.Preparation of rubber sheets :The rubber compound is manufactured as per the requirements after looking in to the chemical and other conditions of the process. Rubber sheets are made on calendar machine in different plies. Lining up to 6 mm thickness can be applied in single layer. If the thickness is more, it is applied in 2 or more layers. For Pipes & fittings Extruded rubber tubes are inserted in the Pipes.Application of rubber sheets :Un vulcanized rubber sheets, which are prepared on the machine are applied on to the adhesive coated, half dried surface under slight pressure of hand or with a metallic roll as well as with the help of various lining tools. We have to ensure that no air gets trapped between the metal surface and rubber sheet. Joints are made levels and joind with help of knurling tools.Vulcanization :By and large vulcanization is carried out in an auto clave. This is the process by which rubber changes from plastic state to elastic state. The temperature and pressure depend upon the rubber compound and thickness of lining. Large size equipments, which are rubber lined at site, are vulcanized By open steam as well as by hot water curing, the temperature is maintained to get the rubber cured and for this method special compound of rubber is to be manufactured for this process.Testing and Inspection :All the rubber-lined items must be tested before and after vulcanization. This is to ensure that they are free from faults, Which might cause failure of the equipment. Visual inspection in good light is carried out to check mechanical damages blisters and poor joints. There after spark test with a high voltage is carried out to check mechanical damages, pin holes, blisters and poor joints. Hardness test is MUST for rubber lining. Knocking test is also carried out by an experienced hand with the help of Wooden hammer to check whether there is any poor bonding.Protection of rubber lining equipments :The vessel should be stored away from sunlight or it should BE covered by tarpaulin or some, other device. This will avoid direct sunlight, which may affect the surface due to the presence of ozone. The vessel should be filled up with water when not in use for longer period.

• Blue: White

We offer Btu meter. Based on calculations of thermal power & energy consumed through measurement of flow, temperature difference of inlet & outlet of the medium. 4-20 mA output proportional to power output. 16x2 LCD, 9 digits for total energy & 5 digits for instantaneous power. The engineering unit can be selected as either KW & KWHr or BTU/Hr & BTU. Communication port RS 232/485 is available with MODBUS RTU. Backup of totaliser on power failure in non volatile memory. Logging history can be viewed on the screen. Ingress Protection: IP65 Equivalent

• Brand Name: SCOPE
• Power: AC 220V/110V, 50/60Hz DC (from battery bank under test)
• Temperature: 0C To 50C
• Humidity: 5 To 90% Relative humidity (non-condensing) Request Callback
• Display: LCD , 128*64 pixel
• Sampling Frequency: 5 Samples/min

• Display Type: Digital
• Packaging Type: Box
• Voltage: 220 V
• Power Source: Electric
• Body material: Plastic
• Frequency: 50 - 60 Hz

• Features: High mechanical properties,Easy to operate,Accurate measurement

• Warranty: 6 Months
• Brand: Fluke
• Digit Display: 4 Digit
• Battery: 9 VOLT

• Adjustable center distance: 50 - 248 mm
• Adjustable center distance with Power Drive: 70 - 248 mm
• Adjustable measuring preasure: 0.02 - 2 Kp
• Max. weight on Floating slide: 20 Kg

Double Flank gear rolling test is generally included in final acceptance test. A gear tested on Double Flank Gear Tester is normally the indication of good running properties of the gear and is adequate assurance about the quality of gear. The readings taken are the validation of center distance between two gears to be inspected or between one gear and one master gear meshing without backlash during one complete rotation of gear

• Accuracy: +/- 3% with grease consistency (grade NLGI) 2/3
• Display Type: LCD
• Brand: Graco
• Maximum Fluid Working Pressure: 345 Bar
• Storage Temperature: 70 Degree C
• Storage Humidity: 95% RU
• Max. Operating Temperature: 60 Degree C
• Metering System: Oval Gears
• Display Digits: 4 Digits
• Power Supply: Standard alkaline batteries 2 x 1.5 Volt, Size AA
• Battery Duration: 18- 24 months
• Weight: 1 Kg
• Features: Easy-to-Read LCD. Easily reset electronic display. Accurate Grease Metering. Utilizes two standard AA alkaline batteries.

• Frequency: 50 Hz
• Usage/Application: Laboratory
• Phase: Single Phase
• Ip Rating: IP54
• Available Power Supply: 24 V DC/110 V AC/230 V AC
• Display: LCD

• Color: Grey
• Material: SS
• Type Of Testing Machines: Eddy Current Dynamometer
• Packaging Type: Box
• Display Type: Analog
• Pin Size: 2 mm
• Frequency: 2 MHz
• Brand: Microfix
• Usage/Application: Industrial