Testing Equipment Dealers in Dighi, Pune

• Brand Name: USIS
• Application: Laboratory
• Retransmission Output: 4-20 mA or RS485 Modbus
• Relative humidity: not more than 85%

BTU 100 L is a versatile compact energy totalizer extremely useful for measurement of energy conversion. It measures the thermal energy required for air conditioning. It accepts 3 inputs, each one from a flow meter for chilled water, inlet temperature sensor and the outlet temperature sensor. From this it calculates the thermal power and energy consumed in maintaining the temperature at given level. 9 digits are available for total energy and four digits are available for instantaneous power reading. The engg. Unit can be selected by user, either as KW & KWH Or BTU / Hr & BTU Advantages : • Compact Wall mounting design with IP 65 Enclosure.• 16x2 LCD for total energy as well as instantaneous power.• Display of chilled water flow, power temperature available.• Choice of mounting either on inlet or on outlet as per site conditions.• Choice of Engg. Units : KW or BTU.• Data storage up to 1 year with hourly storage facility with real time.• Storage can be viewed by scrolling keys.• Serial Interface with computer through MODBUS RTU.     BTU Meter For heat transfer application, SERIES : HET-100L • Suitable for Thermic fluids like HYTHERM 500, HYTHERM 600, DOWTHERM A,    DOWTHERM T etc. • Output in terms of 4-20mA which is proportional to Power obtained. • Communication Port (supports MODBUS-RTU) & Data Logging facility. • Password protection on all programming modes (except display mode) to avoid   wrong programming by an unauthorized person. • Display of 16 x 2 Big Characters LCD with BLUE Backlight. • Buzzer indication for faults/Error with blinking LED (Programmable). • Fault Conditions - Indicated by different Error Codes. • Accuracy of ± 0.25 % of Full Scale. • Ingress Protection: IP65 Equivalent

• Shape: Round
• Application: Commercial
• Finishing: Polished
• Feature: Durable Finish, High Strength, Highly Corrosion
• Usage: Preparation of rubber sheets.
• Advantage: Easy to Operate

Rubber Lined Vessels, Tanks, Piping etc.Rubber lining : The process of rubber lining is divided in to the following steps. Preparation of the base surface. Preparation of rubber sheets. Application of the rubber sheets on the metal surface. Vulcanization Testing & Inspection Surface Preparation :This is very important process for rubber lining. The surface of the metal must be free from oil, paint, scales, rust etc. this is generally removed with the help sand blasting/ shot blasting. After the surface is cleaned, adhesive or bonding agent is applied to surface. Two or three coats are applied, as adhesion is an important process for rubber lining.Preparation of rubber sheets :The rubber compound is manufactured as per the requirements after looking in to the chemical and other conditions of the process. Rubber sheets are made on calendar machine in different plies. Lining up to 6 mm thickness can be applied in single layer. If the thickness is more, it is applied in 2 or more layers. For Pipes & fittings Extruded rubber tubes are inserted in the Pipes.Application of rubber sheets :Un vulcanized rubber sheets, which are prepared on the machine are applied on to the adhesive coated, half dried surface under slight pressure of hand or with a metallic roll as well as with the help of various lining tools. We have to ensure that no air gets trapped between the metal surface and rubber sheet. Joints are made levels and joind with help of knurling tools.Vulcanization :By and large vulcanization is carried out in an auto clave. This is the process by which rubber changes from plastic state to elastic state. The temperature and pressure depend upon the rubber compound and thickness of lining. Large size equipments, which are rubber lined at site, are vulcanized By open steam as well as by hot water curing, the temperature is maintained to get the rubber cured and for this method special compound of rubber is to be manufactured for this process.Testing and Inspection :All the rubber-lined items must be tested before and after vulcanization. This is to ensure that they are free from faults, Which might cause failure of the equipment. Visual inspection in good light is carried out to check mechanical damages blisters and poor joints. There after spark test with a high voltage is carried out to check mechanical damages, pin holes, blisters and poor joints. Hardness test is MUST for rubber lining. Knocking test is also carried out by an experienced hand with the help of Wooden hammer to check whether there is any poor bonding.Protection of rubber lining equipments :The vessel should be stored away from sunlight or it should BE covered by tarpaulin or some, other device. This will avoid direct sunlight, which may affect the surface due to the presence of ozone. The vessel should be filled up with water when not in use for longer period.

Application It is used to pin-point underground cable faults in power transmission, distribution cable networks in acoustic mode with the help of suitable surge wave receiver. Key Features Pin-point location of cable faults in Low voltage cables by acoustic method. Output voltage selectable ranges 0-2kV, 4 kV continuously variable. High energy of 500 Joules (Optional 1000Joules). Full energy delivering capacity at each select range. Single Impulse and 2, 4 seconds intervals Sequence. Pre-location of cable fault distance with suitable pre-locator unit in ICM mode. Power Supply 230V AC + 10%, 50 Hz, Single phase. LT Network 1.1Kv.

The UNIK Air Pressure Leak Tester is an equipment which will ensure that batteries with even minor leaks are detected. The equipment is a programmable micro processor based unit with various time settings that can be programmed through the keypads on the front of the controller. These timings are: 1. Fill Time during which the test pressure is filled in the component. 2. Settling Time during which the test pressure is stabilized evenly over the entire volume of the component. 3. Test Time during which the test component is subjected to leak test. 4. Exhaust Time used to exhaust the air from the test component. The settings of test pressure and permissible leak can be easily programmed with the help of keypads. The detailed test status and test results are displayed on 16 x 2 character alpha numeric LCD display providing record of the measured leak for each test along with other programmed parameters. The operating procedure is very simple once the battery under test has been clamped and test started. Once the equipment is started, the pressure fill cycle starts. The set test pressure is filled in the battery. This cycle continues till the set air pressure is filled within the set fill time. After fill time is over the inlet of air into battery is stopped. At this point of time if the pressure is not filled upto the set pressure specified limits the controller gives a Gross leak signal. In case there is no gross leak; settling time starts with the pressure stabilizing evenly in the battery compartment under test. After the settling time is over the test time starts. At the end of the set test time the reading is checked automatically and a comparison of pressure with preset value is done. If there is a drop in pressure during the test time and if this drop is greater than maximum permitted leak the fault indicator glows. In case the leakage is within acceptable specified limits the OK signal glows. An audio visual alarm helps in segregation of acceptable and rejected batteries thereby eliminating any possible error due to the operator’s subjective judgment.

• Country of Origin: India
• Material: Stainless Steel
• Application: Leak Testing
• Voltage: 220V
• Power: 1KV
• Driven Type: Electric
• Phase: Single Phase

• Condition: New
• Usage: Industrial
• Material: Metal
• Weight: 185kg
• Capacity (L): 750 to 3000
• Accuracy: +/-0.5 degree C
• Temperature Range: +20 to +80 degree C

Our products are the best in the industry, as they are specially manufactured as per international and national quality managements standards. Our clients can make payment for orders through a payment method they want. We accept payment through online or offline mediums that are convenient, secure, and practical.

• Accuracy: ±2%

The AirMon compressed air meter is a highly accurate meter that operates on the Vortex flow metering principle. It’s accuracy of ±2% make it one of the most effective compressed air flow meters in its class. What makes the AirMon unique is that no other flow meter in its class possesses the vital feature of inbuilt Pressure and Temperature Compensation.

• Size: Multisizes
• Type: Water Testing Meters
• Material: Plastic
• Color: Green
• Feature: Accuracy, Digital Water Meter Display, Multi Jet, Spiral Water Meter
• Application: Industrial, Residential

We have adopted different payment procedures for the attainment of complete client satisfaction. The Water Testing Meter, delivered by us, is highly appreciated for its efficiency and long life. In online payment procedure, the procedure depends on the processor model or gateway; both of them ensure complete security. Adhering to global quality management methods, our range of product is of unmatched standards.

Manas make BTU meters comprises of accurately calibrated Electromagnetic Flowmeter, Pair of temperature sensors and Flow Transmitter with integral Energy computing capability unit to calculate Net Heat consumed. We offer our BTU Meters for wide range of applications. Example- In Air handling Units, chilled water, HVAC applications. It is used in centralized air conditioning systems for both commercial and industrial buildings. Similarly for Hot Water & Thermic fluid applications our Heat meter (HET100L) also perfomed well.

• Weight: 0.82 kg
• Accuracy: +/- 0.5 percent
• Repeatability: +/- 0.15 percent
• Display Type: Digital
• Usage/Application: Industrial
• Flow Range: 1.9 to 57 lpm
• Maximum Pressure: 34kPa,0.3 bar
• Flow Range: 1.9 to 57 lpm
• Maximum working pressure: 10.3 MPa, 103
• Minimum working pressure: 34kPa, 0.3 bar
• Operating temperature range: -20°C to 50°C
• Storage temperature range: -25°C to 50°C
• Wetted parts: Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
• Batteries: 2 AA alkaline
• Expected battery life: 6 to 12 months

• Brand Name: SCOPE
• Power: AC 220V/110V, 50/60Hz DC (from battery bank under test)
• Temperature: 0C To 50C
• Humidity: 5 To 90% Relative humidity (non-condensing) Request Callback
• Display: LCD , 128*64 pixel
• Sampling Frequency: 5 Samples/min

We are offering optical power meter come with features such as - runtime and average values of voltage (l-n and l-l) for each phase and average of these values. Runtime and average values of current for each phase and their sum. Neutral current, frequency for l1 phase.

• Features: High mechanical properties,Easy to operate,Accurate measurement

• Application: Industrial
• Brand Name: Sharang
• Voltage: 6-9 V DC
• Color: Black
• Model: ZE107
• Dimensions: 105 x 75 x 30 mm
• Indications: Audible Alarm for Fail Mode
• Weight: 75 gms

• Color: White

Full stainless steel construction with PTFE Liner. Suitable for any type of Dairy Fluids like milk, cream etc. Also suitable for Pharma liquids, juices of various fruits. Available in two types of end connections; SMS or DIN Union and Tri-Clover clamps. Sizes available from DN25 to DN100. Lower Sizes on Request. Highly Accurate and Linear. Isolated Analog and digital Output.

• Memory: 2 GB
• Warranty: 1 Year Against Manufacturing Defect
• No. of Channels: Multichannel
• Power Supply: SMPS 85-240 VAC
• Interface: PC / PENDRIVE
• Export of Data: PDF / EXCEL
• Accuracy (%): 0.25 %
• Sampling Time: 1 sec for 04 ch / 2 sec for 08 ch
• Panel cutout: 78[h] x 154[w] , depth : 144[d]

• Controller: PLC & HMI
• Operating temperature:: Ambient
• Power supply:: 440 V AC, 50 Hz Three Phase.

This speedometer testing setup is designed for testing of different types of speedometer. The machine is capable of performing endurance and reliability testing of three speedometers simultaneously. Process selections are made using buttons on the front panel using our unique, state-of-the-art control technology Features Controlled manner semi-automatic testing machine. Simple to use and easy for maintenance. Controlled parameters with PLC & HMI Quick fix arrangements for different ignition switch. Standard parts and calibrated gauges. Designed with ergonomics and aesthetic considerations.

Triotech have developed tractor transmission test rig for 70 HP capacity. Also designed & manufactured drive line modules required for these test rigs.

• Adjustable center distance: 50 - 248 mm
• Adjustable center distance with Power Drive: 70 - 248 mm
• Adjustable measuring preasure: 0.02 - 2 Kp
• Max. weight on Floating slide: 20 Kg

Double Flank gear rolling test is generally included in final acceptance test. A gear tested on Double Flank Gear Tester is normally the indication of good running properties of the gear and is adequate assurance about the quality of gear. The readings taken are the validation of center distance between two gears to be inspected or between one gear and one master gear meshing without backlash during one complete rotation of gear

• Display Type: LCD
• Material: Iron
• Brand Name: Microfix
• Country of Origin: Made in India
• Features: Top performance,Extremely durable,Longer service life
• Type Of Testing Machines: Air Leak Tester
• Display Unit: Bar

This Data acquisition IOT system is new technology offer by JKS Techfor various industrial use to capture real time process parameters for process control. This system can give data of various process plant and testing machineries.  

• Brand: Scope
• PC Connectivity: Ethernet
• Sampling Speed: 1/2/5/10/20 kC selectable
• Travel Channel: 3 Travel characteristic
• Best Time resolution: 50 muS