Testing Equipment Dealers in Nana Peth, Pune

• Brand Name: Waco
• Frequency: 50 Hz
• Power Source: AA1.2Vx9 rechargeable
• Weight: 750 g
• Size: 165 x 50 x 95 mm
• Display Size: 3 1/2 inch
• Voltage: 180 V

Specifications:- Inputs :- RTD, R, S, K, J. (Selectable) Display Power Supply :- 230 VAC (50Hz) ± 10% Alarm Output :- Common Relay output for all channel. No. Of channel available :- 8, 16, 24, 32 channel etc. Online data recording :- For each channel is up to 500 / 1000 Recording interval :- 1 to 9999 MIN. Manual view scan time :- 1 to 200 SEC. Adjustable Mode :- Auto manual hold. Interface:- RS232 / 485 interface printer output. Memory capacity: 16 MB max expandable to 512 MB max (optional). Resolution: 0. 1 ºC up to 1600 ºC. Dimensions: 72 x 72 mm.

• Country of Origin: Made in India
• Model Name/Number: CM2030
• Battery: 9V
• AC Current - Sensing Range: 1000A
• DC Voltage: 1000V
• Brand: HTC
• Usage/Application: General Electrical

• Voltage: 90 TO 270V AC/DC
• Type: Digital
• Country of Origin: Made in India
• Phase: Three
• Brand: SELEC
• Model Name/Number: EM-306 & EM-368
• Usage/Application: Industrial
• Operating Temperature: 0 TO 50 C
• Frequency Display: 50 HZ
• Accuracy Class: CLASS 1
• Digit: 6 & 8 DIGITS
• Ct Range: 5 - 5000
• Supply Voltage: 90 TO 270V AC/DC

This Battery operated Temperature Datalogger is with in-built temperature sensor. Datalogging can be set to continuous or manual start. Recorded data can be downloaded in PC thru USB port. Button loggers are small battery operated temperature loggers of the size of a button. They are used for applications where temperature of material in transit or in the racks is to be recorded.

• Brand Name: QIS
• Application: Laboratory
• Size: 242x184x135 mm
• Model Name/Number: QT800
• Usage/Application: Laboratory
• Accuracy: +/-1.0%fs
• Temperature Range: 0-50
• Protection grade: IP65
• Medium temperature: 0-50 Degree C

• Display Type: Analog
• Type: Single Needle
• Measurement Range: 0-100HA(HD)
• Automation Grade: Automatic
• I Deal In: New Only
• Test Scale: Shore Hardness A

• Brand Name: ELECTROLAB
• Usage/Application: PHARMA COMPANY

• Display: 7 segment 1/2" LED, 5 digit process value. 8 digit 0.3" display for programming.
• Input: 4- 20 mA DC linear.
• Supply: 230VAC / 110VAC, +10 %, single phase, 50 Hz
• Transmitter Power Supply: 24 VDC,100 mA power supply is made available for the external transmitter
• Serial Communication: SERIAL port RS232 with ASCII protocol.

Single channel data logger accepts 4 - 20 mADC linear input, the most commonly used signal in process industry. 7 segment RED LED display makes it visible from long distance. Pendrive(USB) Facility is available optionally . 4GB pen drive can be connected which is equivalent to 100 million readings per channel.. Single channel Data logger also having facility of Option Digital input. Serial port RS232 for downloading data to PC with ASCII protocol. Data Downloading Software with ASCII protocol comes Free with unit.  

• Brand Name: Rothenberger

We are offering rotest® gw digital v2.3 usb, leak tester etc. Key features high safety and simple use, the software in the unit guides the user step-by-step through the tests - in accordance with the legally required testing specifications simple logging of the results with he thermal printer (optional accessory) or with the pc software included in delivery two ports (infra-red and usb) for quick communication with the thermal printer or pc.

The oldest, most widely used test for determining workability is Slump Test Apparatus. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.General Descriptions & Specifications :The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.

• Color: Yellow
• Display Type: Digital
• Jaw Open: 16 mm
• Material: Plastic
• Packaging Type: Box

• Type: Ph Meter
• Certification: CE Certified
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Display Type: Digital
• Automatic Grade: Automatic
• Power Source: Battery, Electric
• Warranty: 1Year, 2Years
• Feature: High Quality,High Strength,Long Service Life,Light Weight
• Application: Laboratory

• Brand Name: Rotomatik
• Voltage: 80
• Frequency: 50-60 Hz
• Usage/Application: Industrial
• Display: Digital

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry̢۪s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

• Phase: Single Phase
• Display Type: Digital
• Brand Name: Sara
• Voltage: 1x240V
• Frequency: 50Hz
• Accuracy: +-2 Degree C
• Temperature: 27 Degree C
• Wire Type: 2 Wire
• Meter Type: KEE-102

• Feature: Precise,Durable,Reliable

We are offering digital tong testers.