Testing Equipment Dealers in Parvati, Pune

Salient Features :   • The instrument incorporates all indegenous tropicalised components which ensure accurate results in any sort of weather. • The controls and indicators are conveniently placed to achieve ease and speed of operation. • The very low frequency square wave alternating current generated by the generater avoids electrode polarisations and reduces capactive effects to a minimum. • The use of two separate units reduces flux linkage between the generator and amplifier circuits.Highly sophisticated circuits and effective filter make the amplifier highly insensitive towards power line interference. • The accuracy of measurement is within +-4% from 01 ohm to 10,000 ohms and +-10% below .01 ohm.   • Application Ground Water Exploration Geoligical Formation Study Electrical Resistivity measurement For Earthing Station And Installations Foundation Depth Exploratuib Fir Consuctiion Work

• HV output: 0- 8-16-32 kV, 1000 Joules.
• Voltage: 8KV, 16KV, 32KV Continuously Variable.
• Power Supply: 230v AC + 10%, 50 HZ, Single Phase.
• High Energy: 1000 Joules At Each Range (Optional 2000j).
• HT Network: 33KV.
• Medium Network: 11kV

High Voltage Surge Tester (ST-32) is ideally used to pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-32) is known for its portability and versatility. It is suitable to locate faults in all HT cables ranging from 11 kV up to 33 kV class. Attributes : Portable Mounted on castors Easy to carry and use on the field. Manual and auto operation of impulse discharge Capacity enhancement possible Built in Current coupler to facilitate prelocation Allows easy integration for van mounted operation and installation into small vehicles

We are offering bursting strength tester. Bursting strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, rexine, etc. Ubique bursting strength tester is ideal for testing a wide range of materials to determine their quality, strength and performance. Ubique bursting strength tester is easy to operate. It is scientifically calibrated for reliability. It is widely used by industries and institutions and stands out as a proven and reliable equipment. Bursting strength tester is available in three types: •board tester: fitted with moulded rubber diaphragm to test material with higher burst values like paperboard, corrugated board, fabric cloth, etc. (range: 0-3570 kgcm2). Also offered with double pressure gauges (range: 0 to 7 & 0 to 3570 kgcm2) but readings in the lower range are only indicative and not accurate.

• Color: Colorful
• Usage/Application: Industrial
• Packaging Type: Box
• Display Type: Digital
• LCD size: 2.4 inches
• Storage capacity: Up to 10 measurement conditions and one measured profile can be stored in the internal memory
• Languages: The display interface supports 16 languages, which can be freely switched
• Weight: 1.1 lb (500g) including display unit, drive unit, and detector
• Overall dimensions: 52.1 x 65.8 x 160 mm / 2.05 x 2.6 x 6.3 inches (H x W x D)

• Brand Name: Mitutoyo,Insize,MGW
• Model: SJ 210

We are the leading manufacturers, exporters and supplier of this products.

• Accuracy: +/- 0.25% +1- 1 digit, linear to I/P.
• Display: 7 Segment LED Display [Digit height 0.5"] / 16 x 2 character LCD display
• Brand Name: Gaurav Engineers
• Country of Origin: Made in India
• Usage/Application: Industrial
• Power Supply: 440 V AC
• Size Up To 4 Channel: 96 x 96 x 110 mm

• Maximum size of Specimen:: Diameter 25 mm

APPLICATION: Deflection under Compression Load Measurement Compression Tests POSSIBLE INTEGRATION: Setup with Displacement Transducer/ Linear Encoder With Uni Axial Loading Setup With Enclosure for working with hazardous conditions SPECIFICATIONS: Maximum size of Specimen: Diameter 25 mm Measurement: Dial Gauge or Linear Encoder/ Displacement Transducer Attachment Socket: M 27 X 2 P for Testing Machine (others on request)

• Brand Name: Planet Automation Systems

We offer Multi Channel Weight Data Logger , Multi Channel Weight Data Printer. Multi channel weight data logger and printer is panel mounted weight controller , this controller is used to control weighing quantity up to four material, it is having four relay output for controlling conveyor , solenoid valves motor etc. this controller is having set point facility in which we can set required weight and infly , also it is having printing facility in which we can printing actual material field in hopper , this controller is wildly used in industrial as well as construction equipment, it is having good stability on industrial envier mental, and this indicator is made for sites and industrial use, Use 1) Concrete Mixer weighing and weight controlling 2) Conveyor and hopper Weighing and controlling 3) Batching of material

• Type: Electronic Meters
• Certification: ISI Certified
• Application: Control Panels
• Color: Grey, White, Black
• Frequency: 45Hz
• Automatic Grade: Fully Automatic, Semi Automatic
• Power Source: Electric
• Warranty: 1year

Backed with rich experience, we have carved a niche for ourselves in the Indian and international markets as the Exporter and Supplier of the best grade of Industrial Meters. Procured from the reliable entities with consistently even track record, these reasonably-priced Meters are characterized by low wear and tear, appropriate functionality and high endurance properties. By choosing right shipment mode, we timely cater every consignment.

We are working with an aim of making available flawless lot of products and for this; we check the product quality on several grounds. We are a name synonymous to trust and quality, thus we make every attempt to bring forth only finest product range that is manufactured using premium quality range of products.

PENETROMETER WITH BATH FOR BITUMEN & TAR(Analog Version) Penetrometer with bath for Bitumen &Tar Test : As per IS: 1203/1978Use: Used for the determination of penetration of asphaltic bitumen and fluxed asphalt and blown type bitumen, Petroleum wax & jelly.Description: Bath Unit consists of container of 20cm (H) x20cm (W) x35cm (L) Argon welded, needle, SS Cup 55mmdiax35mm (H) 8No. Transfer dish4No., Water bath Inner of SS304 and outer powder coated finish with motorized stirrer cum pump and a flange type hot+cold zone immersion SS304 heater of 1.5 Kw rating to maintain desired temp.Temp. Range: 0°C-95°C, having cooling & heating arrangement controlled by a Digital Temperature controller cum indicator with PT-100 Sensor, Continuous duty Kirloskar compressor for cooling, electrically operated DC 230V plunger, penetration indicator between 225&350, Needle with 50 gms. and 100 gms. weights and timing device. Digital penetrometer for direct readout of penetration having Encoder & Decoder arrangement with digital timer 9.9 sec Max. The whole unit is mounted on castor wheels for easy movability.Microprocessor based unit provides automatically timed operator programmable penetration measurements • Conforms to all ASTM, IP, ISO 9001 and related specifications Unit tests the consistency of lubricating greases, petroleum waxes, bitumens, pastes, creams and other solid to semisolid products, including a variety of food products. Microprocessor control provides a full range of measurement and reporting options The penetrometer defaults to the standard ASTM interval of 5 seconds, or the operator may program a different interval in the range between 0.1 and 999.9 seconds. All selected parameters are retained in memory and automatically repeated in subsequent tests until changed by the operator. Penetration measurements in the full range of 0-400 in 1/10 mm scale are reported in either 1/10 mm or 1/100 mm increments at the operator’s option. If a test result falls outside of the programmed range, an audible signal and visual error message alert the user of a failed sample. Results can be communicated to a printer or computer via a built in interface. Illumination with magnifying glass is also provided. Fine adjustment of the tip of the needle is also provided. Leveling indicator is also given. Built in DC operated Plunger is also incorporated with UNIT.Power:230V50HzBASIC MANUAL (DIAL TYPE) PENETROMETER(With all standard accessories)(Standard accessories includes Needle, Cone with Needle,50/100gms wts,Plates, Cylindrical Container, Sample Container)SS Bath (with Heating/cooling) digital temp. controller PT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer-( Only Dig PID Microprocessor Controller with AUTOTuned type for Bath Temp Control, Range +2*C to 98*C )BASIC Manual PENETROMETER WITH BATH (heating) digital temp. controllerPT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer and Spring loaded needle & std accessories)( Only Dig PID Microprocessor Controller with AUTO Tuned type for Bath Temp Control )DIGITAL PENETROMETER WITHOUT BATH but with Electrically Operated DC Plunger& All std accessories ,Illumination, Magnifying glass, Leveling tube DIGITAL PENETROMETER (with Electrically Operated DC Plunger& All std accessories ,Illumination, Magnifying glass, Leveling Tube) WITH BATH (heating/cooling), digital temp. controller PT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer.Manual Penetrometer: As per IS: 1448[P 93]:1979 / IS: 1203:1978 / ASTM D 1321-76 / ASTM D 217. The Universal Penetrometer is employed for testing a wide variety of materials as measured by penetration of weighted needles or cones. Main applications are for bituminous materials, but waxes, greases, foods, and pharmaceuticals are among other products tested. Penetration is read from a 5" (127mm) diameter indicator dial of 0-400 divisions, each representing 0.1mm of penetration. Global offers heavy-duty units for manual and automatic use and a lighter, portable model for field work or for users with limited work load or limited budget. All meet ASTM and IS standards when fitted with proper needle or cone.The unit is ruggedly constructed for accurate, sensitive measurements. The aluminum base has a machined, grooved table with leveling screws for fine adjustments of tips of needles, cones and a spirit level. A robust stainless steel rod act as a support guides for a cast aluminum head with coarse adjustments & a movable table with rotating knob for fine adjustments to level the meniscus of specimen and a calibrated friction-free plunger mechanism. Indicator dial has instant zero reset. Any needle or cone with standard 1/8" (3mm) diameter stem may be mounted to the 47.5g plunger assembly. A standard 2.5g needle and two additional loading weights (50g, 100g) are included. Needles or cones for other tests can be provided separately as needed. Overall dimensions are 10.5x13x22" (267x330x559), (W x D x H) approx.The Automatic model is the same as the manual unit, but has a button release mechanism with digital timer & DIGITAL read out for penetration to automatically stop the plunger when the preset time from 0.1 to 9.9 sec. expires with audible buzzer sound.The penetration needle for bituminous materials is smooth, hardened, tempered stainless steel with brass ferrule and weighs 2.5g to give 50g total when mounted. Stainless steel wax penetration needle is also 2.5g but has truncated coneshaped tip with approx. 4mm maximum diameter tapered to 0.15mm diameter end. several types of 102.5g grease cones as having polished 90° cone with 30° removable hardened steel tip are available.Standard accessories includes: 1no spring loaded Plunger, 1no each wts of 50 & 100gm, 1no of Needle, 1no Sample Container (Manual Unit including all standard accessories) & CalibretionExtra for Electrically operated Plunger for release of needle/cone.Extra for Digital Timer.POWER: 230V,50 Hz(If opted for Electrical Plunger & Dig.Timer with Buzzer Alarm)CONES, NEEDLES AND ACCESSORIES: Use with Digital/Manual Pentrometer to determine the consistency of petroleum products, wide range of penetration types are available ( also for non-petroleum samples ,see below). (For Grease) (For Bitumen) (For Grease) (For Wax)Optional: (If required additional)1. Weights of 50/100 gms, duly chrome plated and slotted for loading. 2. Hardened needle as per IS standard, GC 2131 per needle. For GC 2121 (HOLLOW CONE of BRASS duly Nichal/Chrome Plated weighing 2.5gms) per needle 3. Brass solid cone as per IS standard. (Used only for Wax/Grease penetration GC 2141/2142)) 4. SS container As per IS STD (35 mm Ht. x 56 mm Dia.) for bituminous sample. 5. SS /Brass Chrome Plated Cylindrical Container As per IS STD with inside thread for Wax 6. SS/Brass Base Plate Chrome plated As per IS STD for Wax 6. Provision for Illumination with magnifying glass 7.. SS Standard Block for Calibration Purpose of Penetrometer (5mm,10mm,15mm,20mm) 8... Dimensional Calibration Charges extra for accessories For Cone, For rest

Panel Meters come with features such as - Runtime and average values of voltage (L-N and L-L) for each phase and average of these values. Runtime and average values of current for each phase and their sum. Neutral Current, Frequency for L1 phase. Active powers,Reactive powers, Apparent powers for each phase and the sum of them. Instantaneous and average Cos Ø and PF values for each phase. Adjustable demand time between 1 and 60min

We are offering latest products of data loggers for all age man & woman.

• Type: Dc Watt Hour Meter
• Color: Brown, Grey, White
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Stable Performance
• Warranty: 1Year, 2Years

We are the main supplier of this product.

• Phase: Three phase
• Voltage: 415
• Type: Digital type
• Country of Origin: Made in India
• Model Name/Number: I.KW
• Usage/Application: Industrial
• Brand: SOFTHARD

• Type: Digital Meters
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Application: Indsustrial Usage
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Stable Performance
• Warranty: 1Year, 2Years

• Voltage: 600 VDC
• Warranty: 1 Year
• Brand Name: Kusam Meco
• Application: Industrial
• AC Current - Sensing Range: 400 ADC

Digital I0 : 5 outputs, 11 inputs- Standard & 8 outputs, 16 inputs- Option Communication: Rs 232, USB, Ethernet, Modbus, Profibus, Device Net Pressure Range: Up to 225 psig15 bar differential Up to 500 psig35 bar gauge Description: Multi-Fumction Leak& Flow Tester Test Programs: 100 Flow Range : Up to 20 Liter per minute Test Channels Availables: 1

• Voltage: 415 V
• Type: Digital
• Country of Origin: Made in India
• Phase: Three
• Brand: SOFTHARD
• Model Name/Number: I.KW
• Usage/Application: Industrial

Environmental Test Chamber, Humiseal Conformal Coatings, Masking Tapes

Get Best Quote Compact, fast and reliable, designed with functionality in mind, thisDigital Alcohol Breath Analyzers fits into every pocket. The tester is extremely easy to use, providing quick and reliable results. This equipment uses an air sensor tested by the industry, similar to the testers used by traffic police.The alcohol sensor performs has a self-test function, checking it is in working order and ensuring that you receive precise results every time. The manufacturer recommends the ALC-SMART for use in organizations or businesses as well as for individuals; perfect for any situation when exact results are needed. The ALC-SMART comes complete with mouthpieces and a measurement accuracy of /-10% at 1.00 ppm.Product Details: High quality alcohol sensor Automatic alcohol sensor test (for accuracy) Low battery consumption Battery level indicator Blue LCD back light Features: High quality alcohol sensor Automatic alcohol sensor test (for accuracy) Low battery consumption Battery level indicator Blue LCD back light Included: Tester 5 mouthpieces Operating Instructions

We are offering multi channel weight data logger and printer. Multi channel weight data logger and printer is panel mounted weight controller , this controller is used to control weighing quantity up to four material, it is having four relay output for controlling conveyor , solenoid valves motor etc. specifications brand: planet automation systems display: 6-digit, 7-segment, 1"25mm red color x 4 display weight channel: 1 channel, 2 channel, 3 channel, 4 channel weight capacity : calibrated up to 10,000 kg and more enclosure: 138mm w x 138mm h x 150 mm d, panel mounted keyboard: numerical keys, up, down, set, done, exit ( 15 keys) units: pounds,, ounces, kilograms, grams etc depend upon calibration display increment: default sample rate: 10 samples per second, decimal point : 0.000, 00.00, 000.0, 0000 load cells: up to four load cell of 2vmv set point relay output : four relay each set point and infly supply: 230 v - ac power 50 hz , 12 vdc � for battery power sensitivity: 9.999 to 9999 operating temperature: 5 c to 45 c battery operation: optional printing : yes lx300+ dot matrix power consumption : less then 10 w multi channel weight data logger and printer is having set point facility in which we can set required weight and infly, also it is having printing facility in which we can printing actual material field in hopper, this controller is wildly used in industrial as well as construction equipment, it is having good stability on industrial enviornmental and this indicator is made for sites and industrial use. Use: 1)concrete mixer weighing and weight controlling 2)conveyor and hopper weighing and controlling 3)batching of material

Data Acquisition System, Alarm, Scanners, Signal Isolator, transducers

Oxidation Induction Tester (OIT), Hot Water Bath, Mini Hot Press

Mitutoyo Surface roughness tester SJ2100, mitutoyo precision tools

Rh data logger, Data Loggers, Differential Pressure Transmitters

Hi, Flow meter is positive displacement type, liquid contact parts in Carbon steelss316 material, accuracy +- 0.1 repeat ability 0.02, size 12" to 3" Counter 5 to 6 digits as required with totalizer. Easy to install and handle.

Trinocular Biological Research Microscope

Humidity Data Logger, industrial peristaltic pumps, motorized actuators