Testing Services in Hingne Budrukh, Pune

Service provider for third party inspection of mobile crane, tower crane, EOT crane etc Service provider for third party inspection of pressure vessels.

• software: testing
• classes: pune

Advanto Software provides real-time job oriented Software testing training in pune . learn best software testing course in pune from the industry experts having more than 10+ years of experience.

RT (Radiographic Testing) Industrial radiography is used for a variety of applications but is commonly performed using two different sources of radiation, X-Ray and Gamma ray sources. The choice of radiation sources and their strength depends on a variety of factors including size of the component and the material thickness. Within the broad group of X-Ray and Gamma ray sources are a variety of camera choices with varying radiation strengths. CR Services X-Ray capabilities run the gamut from 4 MEV units utilized to radiograph extremely large and thick castings and forgings, to portable X-Ray cameras used for field weld applications and thin wall material inspection. Gamma sources vary from very low level fluoroscopic units to perform real time corrosion under insulation surveys, to Iridium (Ir192) and Selenium (Se 75) sources used for a variety of weld inspections, to Cobalt (Co 60) inspections for thick component testing. There are many advantages to radiography including: inspection of a wide variety of material types with varying density, ability to inspect assembled components, minimum surface preparation required, sensitivity to changes in thickness corrosion, voids, cracks and material density changes, the ability to detect both surface and subsurface defects and the ability to provide a permanent record of the inspection. The disadvantages of radiography are: safety precautions are required for the safe use of radiation, access to both sides of the specimen are required, orientation of the sample is critical, and determining flaw depth is impossible without additional angled exposures. Radiographic testing is used extensively on castings and weldments. Radiography is well suited to the testing of semiconductor devices for cracks, broken wires, unsoldered connections, foreign material and misplaced components. Sensitivity of radiography to various types of flaws depends on many factors, including type of material, type of flaw and product form.

As we believe software should be moulded around the needs and objectives of our client's business, to make sure the software is doing what it is supposed to do, we offer system testing and user acceptance testing for existing applications and internet systems. Our testing team will prepare test plans to test the system perfectly.more.

Core Testing services that we provide are highly admired by the clients. We are located in Maharashtra (India) and provide core tests according to IS – 516 – 1959, IS – 1199 – 1959 & IS - 456 – 2000. Core Testing isa reliable testing that is done for checking the compressive strength of the ‘In situ concrete”.  Other physical properties such as density, water absorption can also be measured from the core concrete. In addition to this, chemical properties of concrete specimen for its cement content, carbonation depth, chloride and sulphate content can also be measured by this. The test can be used for slabs, walls, etc., where partial destruction of concrete due to core cutting does not disturb the stability of the member.  In this  method  concrete cores of sizes  raging from 20 mm  to  150 mm in diameter and 50  mm to  500 mm  long  are drilled out  by  a diamond cutters. The recommended diameters are 100 to 150 mm, but if the drill depth is insufficient as in of case slabs, then smaller diameters may be used but not less than three times nominal aggregate size.  The core diameter to length ratio shall be normally between 1.0 to 2.0 (preferably 2.0). The core diameter shall be at least three times the nominal maximum size of aggregate. Reinforcement shall be avoided in the core. At least three cores shall be tested for acceptable accuracy. These cylindrical concrete cores are then made smooth at both ends (if required) and then tested for compressive strength. If required capping of the faces shall be done. The strength of capping material shall be higher than that of concrete in the core. Cap shall be as thin as practicable.  The specimen shall be cured in water for 48 hours before testing. The cylindrical strength is then co-related to cube strength. IS – 516 suggest a multiplying factor of 1.25 for converting cylindrical strength to equivalent cube strength. In addition a correction factor for height to diameter ratio shall be applied as given in IS – 516.  IS – 456 states that the concrete in the member represented by a core test shall be considered acceptable, if the average equivalent cube strength of core is equal to at least 85 % of the cube strength of the grade of concrete specified, but no individual core has strength less than 75 %.   Application : The core cutting is mainly conducted for : Determining “In situ” compressive strength of structure. Small cores for chemical tests Inserting water supply, plumbing pipes inserting conducts for electrical cables Making pockets for machine foundation for inserting bolts Making weep holes in walls   Reliability & Limitations : As this test gives actual in situ strength of concrete is more acceptable, but due to partial destructiveness needs to be used very carefully. The reliability of small cores i.e. 40 – 50 mm is less as compared to normal cores. The detection of reinforcement shall be perfect. If the quality of concrete is not good, one may not even get a complete core for testing. The cost of core cutting is more compared with other ND tests, as it consumes diamond bits, which are costly.

Our key clients trust our strongly testing processes & specialized tools to enhance testing efficiency & precision, reduce costs & decrease cycle time.

QA and Software Testing Services, Security Monitoring Services

A wide array of adhesives is used as a bonding agent/coating agent for various metallic, paper and plastic components. They need to be tested for adhesion, viscosity etc. before a product is used for the intended requirement. Laminates, electronic devices, medical devices, packages, building materials use liquid adhesives, tapes, sealants etc. which requires quality checks i.e. adhesion, bond strength, peel strength etc. to confirm their end use suitability. Heavy industries especially automobile industries need to understand the static and fatigue behavior of critical parts where adhesion is applied. Hence measurement of stiffness and strength of adhesive joints between rigid to rigid parts and rigid to flexible parts becomes of prime importance. Cyclic environmental testing of such a parts is very important. Our laboratory is a pioneer in carrying out tests such as strength, stiffness, lap shear strength, peel strength, cyclic corrosion test & salts spray test. Defense ammunition requires specialized adhesives which are generally based on shellac, bitumen, nitro-cellulose & various polymers. Considering their criticality they have their own specific test requirements. Our laboratory is a pioneer in a testing i.e. evaluation of such as Ammunition Protective Compositions (APCs) critically to know their suitability as end-use applications. Adhesives also require chemical assessment test such as Acidity, Alkalinity, Drying time, volatile matter, Ash, iodine value, etc.

Software Testing Services, community site development services

Software testing is a process of investigation conducted to provide stakeholders with information about the quality of the product or service which under test. It can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. There are two basics types of software testing: Blackbox testing Whitebox testing

Kavyasourcing functional software testing service provides organizations with integration, acceptance, regression, ui, and api testing. We take your specifications or use cases and execute functional tests to verify that your application conforms to your requirements.

Compatibility Testing Services, Manual Testing

free pmp simulation test, pmp certification, PMP Classroom training

Vulnerability Assessment Testing, IT Security Audit, Network Security Service

led photometry test services, led pcb assembly services

Automation Testing, Software Testing

software testing training service, Javascript Training, linux training

Helium Leak testing service, x ray service, RLA Testing Service

comprehensive health checks, Complete Health Check-Up Services

microbial food test, Water, manures, Fertilizers, Drinking Water