Thermistor Dealers in Pune

Insta Control's PTC Thermistor offers protection against: Single Phasing Under/ Over voltage Continuous overloading Intermittent duty or Excessive start/ stops Insufficient ventilation or Excessive ambient temperature Mechanical jamming/ Overloading Bearing failure Our PTC Thermistors are manufactured in accordance with the international standards DIN 44081, 44082 andBS EN 60034-11:2004. Due to their small thermal mass, they have favorable temperature sensitivity.Insta PTC Thermistors should be placed as near as possible to the hot spot. In three phase motors, one PTC Thermistor should be embedded in each phase. Good thermal contact between PTC Thermistor and winding is essential. The PTC Thermistors should be embeded parallel to the winding. In this way the mechanical stresses on the PTC Thermistors during forming the end turns of overhang winding can be minimized. Shrink cap is especially well suited for this because of its mechanical stability. At ambient temperature, resistance of one thermistor is between 20 ohms to 250 ohms. The resistance increases sharply in the region of the nominal response temperature. Response times < 5 sec. are achieved with Insta Thermistor.This signal can be used to switch off power circuit of electric motors/ transformers by using Insta's Thermistor Protection Unit. Insta can supply customised connections with customised individual lead lengths, cross-sectional areas, crimped contacts etc.

Thermistor-NTC-PTC Thermistors are special solid temperature sensors that behave like temperature-sensitive electrical resistors.There are basically two broad types,NTC-Negative Temperature Coefficient,used mostly in temperature sensing and PTC-Positive Temperature Coefficient,used mostly in electric current control. They are mostly very small bits of special material that exhibit more than just temperature sensitivity.They are highly-sensitive and have very high reproducibility with resistance Vs. temperature properties. Thermistors,since they can be very small in size,are used inside many other devices as temperature sensing and correction devices as well as in specialty temperature sensing probes for commerce,science and industry. Thermistors typically work over a relatively small temperature range,compared to other temperature sensors and can be very accurate and precise within certain range.

Senso-Therm Control Solutions is dealing in a wide range of ptc thermistors from India.

ptc thermistors, thermal switches

We offer high quality Glass Encapsulated Bead Thermistors used for various Oceanographic applications. Our Glass Encapsulated Bead Thermistors are designed to deliver fast response and can bear high temperature up to 300oC. The Glass Encapsulated Bead Thermistors, we offer, has glass flow sensors and are also used for many industrial electronics, temperature control and measurements. Highlights : Hermetic glass sealFast responseExcellent stability Specifications : Dissipation : 0.1 to 0.4mW/oCTime constant : 1 to 4 secTolerance : ±1%, ± 2%, ±5%, ±10%, ±20%Temp range upto 300oC

Ntc Thermistor, Thermal Protectors, Electromagnetic Feeder

Ptc Thermistor, solicitor, temperature coefficient thermistors

ptc thermistors, Allied Products, Heat Sensors, Thermal Protectors

Ptc Thermistor, Agro Products, Voltage Monitor Relay

thermistors, Temperature Switch, Automotive Sensors, thermostat switch

Lugs NTC Thermistor, Electro Magnetic Switch, Automatic Thermal Protector

Thermistor, Relays