Tig Torch Parts Dealers in Pimpri Chinchwad, Pune

• Type: Ultrasonic Horns
• Material: Aluminium
• Warranty: 6months
• Country of Origin: India

We are supplier and exporter of this product.

Based in Maharashtra, we are the credible Manufacturer, Supplier and Exporter of the CO2 Welding Torches in the country and overseas. The quality, reliability, and lastingness of our CO2 Welding Torches are accredited to our competent crafting and good choice of raw materials. Moreover, we delight the clients by offering the ample specifications of the Robot Welding Torches at the cost-efficient prices. Trust us for timely delivery!

The Welding Rectifier – is when you desire DC output to melt your electrode. Rectifiers themselves are capable of high performance current deliveries in power sources as little as 160 amps to a massive 1200 amps. The diode based was replaced by thyristor controls that were superseded by advanced electronics – IGBT. This technology revised, restudied and improved several times over the last few years and has allowed us to create a design so robust – it’s like the confidence of knowing that you can take the most abusive welding application head on. Experience DC Power on a Electrode Holder; see what engineering can achieve.

• Brand Name: Kemppi
• Load Capacity: 350A
• Model no: MMT-42C
• Cooling: Gas
• Filler Wires: 0.8 - 1.6 mm

• Type: Lead Screw
• Capacity: 15 ton
• Job Diameter: 400 to 4000 mm

We are the leading supplier of this products.

• Material: Copper
• Size: M3 to M8
• Model Name/Number: Stud Welding Collets
• Brand: Artech

• Type: Boiler Feed Water Pump
• Application: Submersible
• Weight: 400-500kg
• Pressure: High Pressure
• Country of Origin: India
• Brand Name: FN

Perfectly fabricated Reserve Feed Water Tank is the part of our product range. This Reserve Feed Water Tank is available in diverse specifications and sizes required by the consumers. Moreover, Reserve Feed Water Tank of our company is tested by us at various levels in order to make sure about its quality.Features:- Best grade material- High performance- Long functional life

Welding Strip Curtains are widely used in factories and industries where welder have to perform the welding tasks, these Welding Strip Curtains prevent injuries and accidents caused by weld arc and weld flash, hence Welding Strip Curtains are must have thing for premises where welding tasks happens, Welding Strip Curtains offered by Flyban Industries are made by high quality raw material and comes in colored and transparent variant, these Welding Strip Curtains also comes in fully and partial overlapping variant. areas where partition is required between welding area and non welding area these PVC Strip Curtains plays a important role in keeping the workers and work environment safe from injury Benefits of Flyban’s PVC Welding Strip Curtains (Chennai) Welding Strip Curtains protects eyes from harmful UV rays Reasonable Pricing Colored and Transparent variant available Made with Durable and high quality raw material for longer life Provide Superior Protection Can be customizes according to need and requirement of area

• Material: Mild Steel
• Automation Grade: Automatic
• Brand Name: Sabari
• Warranty: 1 year warranty
• Voltage: 415 Volts
• Usage/Application: Industrial
• Frequency: 50-60 Hz
• Capacity: 1 - 1000 Tons
• Minimum Order Quantity: 1 Ton

• Voltage: 110V, 220V, 450V, etc
• Power: 1-5kw, 10-15kw, etc
• Driven Type: Electric
• Weight: 100-1000kg, etc
• Advantage: Easy to Operate
• Performance: Excellent Result

• Type: Electric, Hydraulic, Pneumatic
• Application: Fume Extraction
• Weight: 0-100kg, 100-200kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V, 580V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1yrs, 2yrs
• Automatic Grade: Automatic, Fully Automatic, Manual

We are the main supplier of this product.

• Material: Mild Steel
• Automation Grade: Automatic
• Voltage: 415 Volts
• Warranty: 1 Year Warranty
• Application: Industrial
• Frequency: 50-60 Hz

Stud welding gun, Capacitor Discharge Stud Welding Machine

With the aid of secure payment procedure and a team of adroit professionals, we have marked our prominence in the market. Our payment procedures ensure faster trade. Our team of quality analysts ensures that the offered product is of unmatched standard and free from any kind of flaws.

Spot welding electrodes

Being quality centric approach to our organization, we are instrumental in providing ultrasonic plastic welding machines.

• Frequency: 50 Hz
• Voltage: 415 V
• Brand Name: Keje Thermoweld
• Country of Origin: Made in India
• Material: Mild Steel
• Packaging: Wooden Box
• Usage/Application: Industrial / Personal

co2 welding machine spare parts, Forklift Spare Parts, Industrial Hardware

We, at Elcab Conductors are a trusted name among manufacturers of electric cables and wires. We manufacture CO2 welding cables which are similar to TIG and MIG welding cables.   These cables have a pipe of PP in the centre (the pipe can be used of different material as per requirement) and two pilot wires stranded along with ABC. Feel free to email us for further information   

Machine Frame is Robust and Rigid Fabricated. Water Cooled Welding Transformer, Microprocessor based Welding controller, 2nos. Servo Motor + Gear Box for Component indexing Fixture Base Plate and Clamping arrangement.

• Type: Welding Machine
• Weight: 300-500 Kg
• Condition: New
• Thickness: 0.4-2.0mm

Self Aligning Rotators automatically adjust the roller Housings to accept any job diameters with in the specified diameter range. This type of machines are generally used to cope with the change in shell diameter, Job to job. The roller housings of this type of machine are hinged ot the beds and to cope with the change in shell diameter job is introduced. In this type of rotator. each roller brackets assembly have two separater roller assemblies, and thus supports the job on a wider area. The final drives is given to both the 2-sets of rollers of the Drive Unit, provide better traction ot the job. However, in this case a declutching arrangement is provided to the top rollers, in order to protect the gear boxes, as when the job hits the top rollers first while loading, there is a tendency of rotating the top rollers where as it locked by the gear boxes.

welding positioners aligns the job to the best position for down hand welding for non circular jobs or for rotating circular jobs.     features :   • light duty series• ideally suitable for small jobs in the range of 50kg to 150kg.• designed to give accurate and controlled movement.• job can be tilted any side for convenient operation.• face plate rotates with variable speed.• available with optional accessories like torch stand, foot switch &    operator pendant etc.medium & heavy duty series : covers wide range of jobs starting from 250kgs to 250 tons. Designed and manufactured for trouble free and easy operation.   fabricated with heavy sections which avoids deflection under loaded conditions resulting in vibration free and smooth operation. Anti-fall arrangement for face plates gives additional safety. Positive locking for tilting arrangement with instant braking arrangement ensures safety and accurate positioning. Rotary drive unit with ac variable frequency drive (vfd) provides steplessely variable speed from 0.1 to 1 rpm for face plate. Earthing arrangement with wear compensation gives uninterrupted welding as well as safety to the positioner elements. Tilting arrangement from 0 to 135 degrees ensures approach to all joints.     main advantages   • easy positioning of odd shaped jobs for downhand welding.• allows maximum flexibility in job handling.• with minimum handling. Maximum accessibility to joint is assured.• eliminates frequent usage of crane, reducing idle time.• increased production with reduced labour.• single handed job manipulation and welding reduces labour cost.• improved weld quality (even with unskilled operator) reduces weld defects and rejection.• adaptable for automatic of manual welding.• convenient for assembling intricate sub-assemblies.• ideal for in conjunction with column & boom.         special features of our design   • extremely stable and 'free standing' with the rated load. • rugged & robust design / construction. Enhanced 'cg' rating due to specific design,lowering the distance to the 'pivot point' from table. • forced diversion of 'earth return current' off the spindle bearings, avert bearing damage. • activation of mechanical 'stoppers' in case of limit switch failure.

• Color: Red
• Material: Plastic
• Usage/Application: Welding

Features : Latest PWM inverter technology IGBT based Smooth and stable arc with spatter less welding HF start ignition High efficiency (>83%) Pulse TIG for precision welding Three phase inverter based, High efficiency and High Power Factor Pulse TIG/ MMA DC Welder Useful for wide variety of material types and thickness Full featured TIG controls possible Power source with built in HF ignition Intelligent protection: over/under voltage, over current/ temperature Option of water cooled Torch with water cooling unit available.

• Material: ECU, CUCRZR
• Brand Name: Esab
• Diameter: 0.8 - 1.6 mm
• Usage/Application: Mig/ Mag / Co2 Welding

welding regulator, Welding Accessories, Welding Electrode, Welding Machine

• Material: Aluminum, Iron
• Color: Black, Grey, Silver
• Feature: Adjustable, Good Quality, High Strength
• Warranty: 1-2 Years
• Condition: New
• Use: Separate feeds containing