Transmitter Device Dealers in Pune

• Accuracy: ± 0.5% F. S.
• Types of Input: Dedicated
•  : • RTD (Pt-100 / PT-200 / CU-53) 2 or 3 wire • Thermocouple (J / k type)
• Type of Output: 4-20 mA DC, 2 wire non-isolated
• Calibration Range: Factory Calibrated
• Power Supply: 24 V DC, external
• Power Consumption: < 40 mW
• Response Time: < 500 msec
• Temperature Coefficient: ± 0.01% peroC
• Enclosure: Epoxy Mould
• Dimensions: 45 mm (Ht) x 30 mm (Dia)
• Mounting: Head Mounting
• Weight: 250 gms
• Operating Conditions: Temperature 0 to 55oC / Humidity 5 to 95% non condensing

• For monitoring climate in building technology, BMS, AHU's and climatic chambers• Accuracy: ± 2.5% rH• Simple adjustment concept for adjustments on site• Connection to P2A Software for parameterization, analysis and adjustment

The FF86 series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocities and temperature. High-quality hot film sensor elements based on cutting-edge thin film technology ensure maximum sensitivity, even at lowest mass flows. At the same time, the innovative probe design produces reliable measuring results at high flow velocities of up to 40m/s (8000ft/min).The integrated temperature compensation minimizes the temperature cross-sensitivity of the FF86 series which, combined with the robust mechanical design, allows it to be used at process temperatures between-40 to 120°C (-40 to 248°f).In addition to air velocity & temperature values, the transmitter calculates the volumetric flow rate in m3/min or ft3/min. the cross section of the duct needs to be determined for this purpose and the volumetric flow rate can displayed and directed to one of the analogue outputs.The configuration software included in the scope of supply allows choosing the appropriate output parameter and freely scaling the display range & signal level of the two analogue outputs. In addition user-friendly calibration of the air velocity & temperature and the adjustment of key parameters (e.g. response time of the velocity measurement, low flow cutoff points, etc.) are supported as well.   An optional illuminated display with two control buttons integrated in the cover is available. In addition, this enables changes of the configuration to be made directly on the unit.The FF86 series has a robust metal housing to protect against possible damage in rough industrial environments. There are four different models, providing a comprehensive range of mounting options;Model A for wall mounting - Model B for duct mounting - Model Cwith remote probe - Model E with remote probe, pressure-tight up to 10bar (145psi)   The FF86 series can be used to measure the velocity of other gasses as well, although a correction has to be applied to the unit at the factory.Typical Applications: Monitoring incoming and outgoing air (energy management) in HVAC applications Filter monitoring and laminar flow control in cleanrooms Exhaust systems; exhaust hoods and glove boxes in the pharmaceutical, bio and semiconductor industries Mass flow measurements during incineration processes Monitoring and measurement of compressed air systems Air conveying systems - wind tunnels and climate simulators Feature:High accuracyWorking range 0...40 m/s (0...8000 ft/min) and -40...120 °C (-40...248 °F)Measurement of air velocity and temperature calculation of volumetric flow rate low dependence on angle of inflow probe diameter 8 mm (0.3") remote probe up to 10 m (32.8 ft) easy mounting and maintenance correction for pressure, humidity and media low flow cut-off pressure tight up to 10 bar (145 psi)SI and US units selectable

• Temperature: 0 to 65 deg C
• Electronics Housing: Stainless Steel or die cast aluminium, flame proof
• Applications: Liquids including hazardous but non-corrosive medium
• Input Supply: 24V DC
• Analog output (Programmable): 4 – 20mA, 20 – 4 mA, 0 – 10 V DC, 10 – 0 V DC
• Mode: Distance OR height measurement
• Display: 8 x 2 alphanumeric display, “ 7 segment LED ”
• Communication: RS 485 – Modbus
• Measuring range: 5mtr, 10mtr ,0.5mtr, 1 mtr, 3.5 mtr
• Resolution: 1mm, 5mm or 10mm depending on models
• Accuracy: 0.5% of FSD
• Updation time: 150 mS max
• Minimum distance: 40mm to 300mm depending on range
• Display Filter: None / Low / Medium / High
• Temperature compensation: Inbuilt
• Voltage Variations: Internal calibration and automatic compensation
• Process Connections: 1/2 Inch Bsp, 1 1/2inch Bsp
• Electrical Connections: Pg 9 One Gland, 2 Numbers
• Sensor face: Anodised aluminium
• Sensor body: PVC

• Brand Name: ABB
• Voltage: 11 V and 30 Volt
• Frequency: 2400 - 2483.5 MHz
• Temperature Range: 200 to 1800°C
• Shape: Round
• Use: Industrial

Noteworthy Supplier of Head Temperature Measurement Transmitter, we are customers' favored option in this domain. Our main concern is to deliver top-of-the-line quality products and for this, we check the entire lot on several quality parameters.

AJ - 510 are most advance monitors with built in Re-Transmission facility .AJ 510 electronic flow monitor are high speed micro- controller based units with a high resolution back-lit display. By using front panel tactile keys, one can view program different parameters one can read the flow rate in LPH, M3 Hr only and corresponding Total reading in Liter or M3only. Our IP 65 grade enclosures make our flow meter versatile on both Panel & Field uses Along with these two consecutive displays these monitors also have relays to operate in various modes such as: Batcher, Pulser, and Rate Switch. As standard Fluid Computer provide 4-20 mA current output proportional to the flow rateflow velocity. With optional addition on cards these monitors can also provide RS-232 or RS-485 output for further advance connectivity. With this facility direct printing option or computer connectivity becomes simple.

Bringing you top quality Position Transmitters manufactured using the superior grade material and the most advanced technology available. Our products are known for their durability and longer equipment life. We are one of the best known and trusted manufacturers, exporters and suppliers of Position Transmitter all over the country. These Position Transmitters can be ordered with us at competitive rates. Hassle free delivery options are available for bulk orders.

SALIENT FEATURES Non contact type level measurement. 2 wire operation. Integral LCD Display Self diagnostic function i.e. Error message are displayed. Automatic temperature compensation. Instrument configuration settings are password protected. Accuracy 0.25% of F. S. Compact size & easy maintenance. Reliable & cost effective system. Software calibration.   DESCRIPTION MicroSet series MS ULT - 311 is a 4 wire Ultrasonic Level Transmitters specially designed for non contact type level measurement. Ultrasonic level measurement is based on the time required by ultrasonic pulses to travel from sensor & surface of liquid & back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids & waste water. The transmitter provides 4-20 mA DC continuous output with local indication through LCD. The measuring range is available from 0.6 to 8 meter.   TECHNICAL SPECIFICATIONS Measuring Range : 0.6 to 8 mtr Type of Output : 4 - 20 mA DC, 2 wire Power Supply : 24 V DC, External Power Consumption : < 500 mW Dead Band : 0.6 mtr Display : 8 x 1 LCD (4 digit for Level) Accuracy : +/- 0.25% of F. S. Operating Temperature : -30 to 80°C Operating Pressure : Atmospheric Beam Angle : < 7° Response Time : < 500 mSec Measuring Frequency : 25 Khz Temperature Coefficient : +/- 0.01% per°C Enclosure : Weather-proof, IP-65 Process Connection : 2” BSP Threaded Mounting : Top of the tank Weight : 1.5 kg Operating Conditions : Temperature 0 to 55 C / Humidity 5 to 95% non condensing NOTE : Process temperature & pressure exceeding specified limits, kindly consult with factory.

Based on the AirChip 3000 Digital TechnologyInnovation in Humidity and Temperature Measurement Highest accuracy at 0.8 %rh and 0.1˚C Outstanding long-term stability and chemical resistance Widest Temperature measuring range at -100…200 ˚C Two Interchangeable HygroClip digital or analog probe inputs 10,000 point data logging with time stamp and battery back-up Up to 4 programmable Analog Outputs available Digital Output Options Multiple Alarm Relays Audible and Visual Alarms Galvanically Isolated power supply

• Type: Transmitter
• Use: Electrical
• Shape: Round
• Color: Metallic
• Quality: Good
• Warranty: 1 Year

We are one of the well known manufacturers and suppliers of Electrical Transmitter in the market. Our Electrical Transmitter is a rugged instrument designed for measuring various parameters. Our simple to use Electrical Transmitter removes the use of display as available with an in built displaying system. It can accept mV or mA input from a variety of sensors such as load cells, torque cells, pressure sensors, temperature sensors, etc. Properties : Corrosion resistant Abrasion resistant Full Software Calibration Available in various types of housings Set Points with relay contacts Dimensionally accurate Specifications : Accepts a pulse input and display linear position or angular position or rpm Various input options such as mV, mA, DC, Voltage, ohms, TTL pulses, etc. Various output options such as RS232, RS485, (MODbus), 4-20 mA, 0-5/10 VDC Applications : Building energy management systems Commercial & residential sectors Clean rooms Museums Climate chambers

• Measuring range : -1 … 400 bar
• Min. measuring span : 0.1 bar
• Max. measuring span : 400 bar
• Pressure type : Absolute, Relative (gauged)
• Standard error of measurement (BFSL) : ± 0.04 % FSR ,± 0.1 % FSR ± 0.2 % FSR Including non-linearity, hysteresis and non-repeatability according BFSL For turndown, multiply this value by the applied turndown ratio
• Max. measuring error : ± 0.1 % FSR, ,± 0.25 % FSR ± 0.5 % FSR Including zero-point and span error, nonlinearity (by terminal base line), hysteresis and non-repeatability (EN 61298-2) For turndown, multiply this value by the applied turndown ratio
• Temperature coefficient : ≤ 0.03 % FSR/10 K , measuring span ≤ 0.03 % FSR/10 K , zero point
• Compensated temperature range : -40 … 85 °C
• Long term stability : ≤ 0.1 % FSR/a , measuring range > 1 bar ≤ 1 mbar , measuring range ≤ 1 bar
• Max. turndown ratio : 05:01:00 AM
• Rise time (10 ... 90 %) : ≤ 5 ms
• IO-Link version : 1.1
• IO-Link port type : Class A
• Baud rate : 38,4 kbaud (COM2)
• Cycle time : ≥ 2.3 ms
• Process data length : 24 bit
• SIO-mode : No
• Process data (cyclic) : Process pressure
• Diagnostic data (acyclic) : Process temperature
• Compliance and approvals: Explosion protection 

• Item Code: P383
• Brand Name: Nuclus
• Function Rated: Indicator Cum Totalizer
• Display: 16 X 2 mm LCD Display
• Cutout Size: 90 mm X 90 mm
• Protection Rating: IP 65

PRESSURE TREANSMITTER Series 4450-TX-EX, 4450-TX-U Features Gauge, Absolute pressure 2 wire design Temperature Compensated upto 80 deg C All wetted parts SS 316 Reverse polarity protected With or without local indication Flame proof, non flame proof versions available Liquid level measurement Chemical remote seal can be provided

• Type: Flow Transmitters
• Application: Measuring Use
• Application: Air Conveying System, Building Automation
• Color: Green, Grey, Light Green, Multicolor, Sky Blue
• Feature: Easy To Use, Four Times Stronger, Proper Working, Superior Finish
• Voltage: 110V, 220V
• Frequency: 50Hz, 60Hz
• Power Source: Battery, Electric
• Warranty: 1year, 2years
• operation current: Double Phase, Single Phase, Triple Phase
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature
• Cpndition: New, Used

We are a top-notch supplier of a temperature transmitter that is used for monitoring humidity and temperature levels. Known for its accurate readings and long service life our temperature transmitter is available at industry leading prices.

• Brand Name: Nivelco
• Certification: ATEX
• Power Supply: 10 - 36 V DC
• Ambient Temperature: - 40 Deg C - + 70 Deg C
• Pressure: Max. 25 Bar
• Medium Temperature: - 50 Deg C - + 600 Deg C
• Current: 4 - 20 mA + HART
• IP Rating: IP65

• Application: Used for long-term monitoring of the CO2 levels in the aquarium
• Indications: Green will indicate a proper CO2 value, yellow will indicate to much CO2 and blue will show not enough CO2.
• Indicator solution turns green at: approx. 20-25 mg/l of CO2.
• Categories: CO2 equipment

Item Code: 02 Specifications:- Compact Size, Low Cost Ranges From : -1â�¦0 to 0â�¦.200 Bar Accuracy : 0.5 % BFSL Output signals : 4â�¦20 mA, 0â�¦10 VDC, 0â�¦5 VDC, 1â�¦.5 VDC Working Temp. : -20â�¦85 Deg C Protection Class : IP 67 Protection Class : �¼â�� BSP ( M) Application:- For OEM Appliction

• Ingress Protection: IP65
• Power Supply: 110-230 V Ac. 50Hz
• Flow Velocity Range: 0.3 M/sec to 12 Mtr/sec
• Response Time: 2 Sec

• Type: Sensor Transmitter
• Weight: 0-100 Gm, 100-200 Gm
• Display Type: Digital
• Accuracy: +/-2%.
• Enclosure: ABS
• Humidity: 95% RH, 99% RH
• Linearity: 0.02% FS, 0.03% FS
• Measuring Range: 0-10 Ppm, 10-20 Ppm
• output signal: 0-5 MA, 10-15 MA, 15-20 MA, 5-10 MA
• Temperature: -40- +20 Deg C, 20-80 Deg C, 80-140 Deg C
• Operating Temperature Range: 2 to 45 Degree C (36 to 113 Deg F)

Protocontrol offers ultrasonic level transmitter for level sensing applications. It is low cost, non contact type level measurement technique. The analogue op (4-20 ma, 20-4 ma) is used for indication and control purpose. The sensor is to be mounted on tank or hopper, the op signal can be processed at field or in control room for control action. Various models are offered for sensing range up to 50 meters for liquid application. For solids application the range is approx 25 mtrs. an ultrasonic pulse is transmitted from the sensor face. The pulse travels to the surface being monitored and is reflected off this surface back to the sensor. The time of flight is divided by 2 and converted to an output signal directly proportional to the material level ultrasonic level transmitter can be used in food and beverages industries, water wastewater treatment plants, chemicals and oils. However it is not recommended where foam, fumes and excessive wind is present. this transmitter is simple having only push-button calibration. The output is 4-20 ma or 20-4ma it has built-in temperature compensation. It is having compact size and is easy for mounting and installation. sensing range up to 50 meters for liquid , for solid the range is approx half.

• Output: 4 - 20 mA
• Features: Pocket friendly price , Easy to install, Durable.
• Working Range: 0-20m/s
• Response Time: Typ. 4 sec. or typ. 0.2 sec.
• Power Supply: 24V AC/DC +- 20 %
• Current Consumption: Max 150mA
• Electrical Connection: Screw Terminals max. 1.5 mm
• Angular Dependence: Less than 3 % of measurement
• Probe Length: 200 mm

Flow transmitters are calibrated to read in gallons and liters per minute with two totals in which case one is resettable and gives you a cumulative flow total.

• Brand: Marsh Make
• Accuracy: 0.2% +/- ,1 Digit F.S.R.
• Type: Wired
• Usage/Application: It is used for display purpose with Electrical actuator .
• Model Name/Number: PP503
• Voltage: 230 VAC-110 VAC ,50 Hz
• Operating Range: 0-100.0 %
• Screen Size: 96X96X125mm

• Type: Pressure Transmitter
• Material: Aluminium, Plastic, Polyester Film, Raw Aluminium
• Weight: 0-50gm, 100-150g, 150-200gm, 200-250gm, 250-300gm, 300-350gm, 350-400gm, 400-450gm, 450-500gm, 50-100gm
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Application: Industrial Use, Pressure Measurement
• Frequency: 50Hz, 60Hz
• Driven Type: Battery
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance