Turbine Flow Meter Dealers in Pune

• Brand Name: INCONEL
• Output: PULSE
• Material: SS304 OR SS316
• Display: Remote
• Operating Temperature: 0 TO 70 DEG C
• sage/Application: INDUSTRIAL OR PROJECTS
• Model Name/Number: DIGITAL FLOWMETER
• Application Media: Any Liquid
• Flow Range: CORRESPONDING TO 0.5 TO 5 METERS/SECOND VELOCITY OR AS REQUIRED
• Operating Pressure: 0.5 BAR -10 BAR - 20 BAR

• Brand Name: Mass Flow
• Size: 0mm to 1000mm
• Place of Origin: Pune, Maharasthra
• Material of Construction: Material of Construction Gas Turbine Flow Meter Regularly Stainless Steel 316 L.
• Condition: Good
• Feature: Flow Meters With Remote Display Extrinsic Proof Certified,High Accuracy,Calibration Certificate.
• Product Type: Venturi Type Flow Meters

The Gas Turbine Flow Meter, which we offer, measures gas volume flowing through an annular passage in the meter. The flowing gas volume is totalized on a local mechanical counter. In addition, low or high frequency pulse signals are generated to infer the gas flow and volume. The indicated gas volume is the actual volume flowing through the meter at the actual temperature and pressure.The Gas Turbine Flow Meter is available in two models The Gas Turbine Flow Meter is used for high accuracy and custody transfer applications. The Gas Turbine Flow Meter is an economically priced meter with a good accuracy.  Gas Types: The Gas Turbine Flow Meter in its standard design can be used for all non-aggressive gases, such as natural gas, methane, propane, butane, city gas and fabricated gas, air, nitrogen, etc. For aggressive gases, like sour gas, biogas and oxygen, special designs are available with Teflon coating, special lubrication or special purging. See table 1, for detailed requirements or different type of gases.  Measurement Systems Gas Turbine Flow Meter are designed for precise metering of all non-aggressive gases and fuel gases such as natural gas, propane, butane, ethane, coke oven gas, town gas, acetylene, nitrogen, carbon- dioxide, air and all inert gases. These are available for flows up to 50000 actual M3/Hr. These Gas Turbine Flow Meters are approved by Legal Methodology for Custody Transfer Application. Gas Turbine Flow Meter has a wide range of 20:1.The meter incorporates Direct Reading Local Electronics Totalizer. Option of Pulse Transmission for remote indication is available. Flow Computers and Volume Correctors are available as optional.Temperature Ranges : As standard The Gas Turbine Flow Meter is designed to operate at temperatures between -10oC to 60oC. Special low and high temperature designs are available on request.Standard Accuracy Limits For Custody Transfer Models Are In Accordance With The Ec Directives And Many Foreign Regulations     ± 0.5% for 0.2 Qmax to Qmax     ± 0.5% for Qmin to 0.2 Qmax  As An Option For The Custody Transfer Model The Accuracy Limits Can Be Improved To     ± 0.2% for 0.2 Qmax to Qmax     ± 0.3% for Qmin to 0.2 Qmax     Material of Construction : Material of Construction Gas Turbine Flow Meter Regularly Stainless Steel 316 L. Details - Flow Meters With Remote Display Extrinsic Proof Certified, High Accuracy Calibration Certificate Warranty - 1 Year Turbine Type and Differential Pressure- Venturi Type Flow MetersMaterial Used - Steel Sizes Available 0mm 10mm 15mm 20mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 400mm 500mm 600mm 800mm 100mm

• Brand Name: DMS
• Application: Laboratory
• Application Media: Water

Our stern examination in the raw materials and other inputs help us presenting quality assortment of products. With complete inspection on all materials, we ensure premium quality of products. For the convenience of our clients, we have formed payment terms and conditions that are as per the law and simple. The methods we use are practical, convenient and diverse. Approx Price : Rs 13,000 / Piece

Turbine Flow Meters are indirect volumetric meters. These Turbine Flow Meters manufactured by us are of top quality and made using superior grade material and advanced technology. Our products are known for their durability, longer equipment life and correct results. We are one of the best known and trusted manufacturers, exporters and suppliers of Turbine Flow Meter all over the country. These are available at competitive market prices. We undertake medium and bulk orders.

We are offering turbine flow meter. Protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. rotorflow® flow sensors 1. Provide visual indication, continuous sensing and accurate switching 2. Bright, visual indication with choice of pulsed dc output, or adjustable 1 amp switched output. 3. Flow ranges from .1 gpm to 60.0 gpm 4. Compact inline housings available in high performance plastic, brass or stainless steel housings. The rf-2500 series flow switch, has been totally re-engineered with a one piece composite rotor, stronger unibody construction, ceramic shaft and better sealing. the results are greater durability with broader chemical, temperature and pressure capabilities. switch types for specific flow setpoint switching, rotorflow® rfs type flow stitchesare one of the most reliable flow switches available. setpoints are fully adjustable over the specified flow range. the dynamic operation of the rotor guards against jamming and false actuation. output types for flow rate monitoring or metering applications. rotorflow® rfo type flow sensors provide a pulsed dc voltage output that is proportional to the rate of flow. the operating range of 4.5 to 24 vdc pulsed output is easily integrated into most digital logic units. rfa type rotorflow® sensors provide a continuous 0-10 vdc analog output.

The Turbine Flow meter is used for the measurement of liquid flow rate. It works on the principle of Turbine. A turbine flow meter is constructed with rotor and blades that use the mechanical energy of the fluid to rotate the rotor in the flow stream. Blades on the rotor are angled to transform energy from the flow stream into rotational energy. The rotor shaft spins on bearings - When the fluid moves faster, the rotor spins proportionally faster. 

• Application Media: Water
• Power Supply: 24 V DC
• Range Ability: 10:1
• Process Temperature: 250 TO 325 Degree Celsius
• Process Pressure: 120 - 200 Kg/cm square
• Humidity Limit: 0 to 100% RH
• Body Material: SS 316

• Size: 1/2", 3/4", 1", 1-1/2"

Turbine flow meter are available with NPT fittings, stainless steel shaftthrust bearings and PTFE sleeve bearings. These meters are available in 12", 34", 1", 1-12" and 2" models.

• Application: Water, Diesel, Gasoline, Oil etc.
• Meter size: DN 4 to DN500
• Flow: 0.04 - 0.25 to 400 - 4000 m3/h
• Ambient Temperature: -20 to +60 deg C.
• Fluid Temperature: -20 to +120 deg C.
• Operating Pressure: for threading connection - 16 bar to 400 bar / for flange connection - as per flange rating

EUTURB consists of a multiple-bladed rotor mounted in a pipe, perpendicular to liquid flow. Liquid flows through the pipe causing a rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. Pulses are counted & 4-20 mA gets generated with the use of converter. Performance Repeatability : ±0.2% Accuracy Standard : ±1% of reading Wetted Components Body : Standard SS304 (optional SS316) Bearings and Shaft : Tungsten Carbide Rotor : Standard - 2Cr13 Stainless Steel (optional Alloy CD4Mcu) Retaining Rings : SS316 Power supply, Protection Power Supply : 24 VDC / Battery operated Flow, Totaliser display : optional Transmitter : 4 to 20 mA DC current signal Housing : non ex. Proof / ex. proof Protection : IP65

The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 4 ranges from 0-750 NLPM to 0-1500 NLPM as range table.   Features • Available in five flow rate ranges - capable of measuring flows from 0.2 to 20 L/min (5.2 GPM) • Cast stainless steel construction insures compatibility with a wide range of fluids for a very economical price. • Highly accurate - all MTW series flow meters provide ± 3% full scale linearity • Flow switch functionality - easy access filed adjustable relay to provide a single flow alarm contact closure available as an option. • Compact size - ideally suited for use in constrained spaces.

• Material: Stainless Steel
• Brand Name: Ajinkya Automation
• Application Media: Liquid
• Size: 1/4" to 3" inch
• Flow Range: 1.0 LPH to 24000 LPH
• Temperature Ratings: 20 Deg C to 250 Deg C