Turck India Automation Pvt. Ltd. Balewadi, Pune, Maharashtra

the new welding nut sensor, Turck is now offering an affordable and process reliable alternative to previously used and expensive optical detection methods that are prone to error or malfunction.Spacer sleeves and welding nuts are used to ensure that vehicle components such as frames, U-beams, car seats or tanks are assembled to meet the design requirements. If even one single nut or bushing is missing from its intended location, production comes to a standstill and the work goes into the scrap pile. One approach to solving the component inspection problem is the use of fiber optics which can sense the bolts laterally. However, because the weld spatter that builds up can impair the fiber optic functions and even disable them, this process is expensive and unsuitable.

  Ultrasonic sensors detect a multitude of objects contactless and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Our ultrasonic sensors are available in many different designs, ranges, cone angles and output types. Most of them feature temperature compensation, noise suppression and a connection cable for auto-synchronization.

  The contactless encoders Ri360P-QR24 and Ri360P-QR20 make no compromises in terms of ruggedness and resolution and are suited to all those applications where rotation speeds, sense, position, angle and lengths have to be captured. These series are wear-free and will withstand even the harshest environmental conditions. Our range provides encoders in a wide variety of designs, graduated in a range of sizes from 24 mm up to 102 mm diameter, as versions for incremental or absolute position detection, and as hollow or solid shaft variants; they can be used to easily and reliably perform positioning tasks with a resolution of up to 18 bits for absolute encoders and of up to 36,000 pulses per revolution for incremental encoders.

  Our product portfolio guarantees maximum flexibility for temperature measurement. The temperature sensors of the TS series offer tailor-made solutions by simple programming, flexible process connections and displays. The TTM/TTMS series includes a number of compact sensors - optionally with integrated probe or with M12 connector for separate probes. The T-Gage infrared sensors contactlessly measure temperatures from 0 to 300 °C. The TP-series includes temperature probes in various lengths and diameters.

We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.

Sensors provide important information for almost all areas of industrial automation, such as digital and analog signals on positions, currents, flow rates, temperatures, distances, and angles. As a co-founder and pioneer of modern sensor technology, we offer the appropriate range of products for these purposes. You can choose from more than 5,000 proximity switches, photoelectric, flow and position sensors to implement your made-to-measure solutions.

  Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.

  With the compact or modular RFID system from Turck, you can use the proven HF technology and the wide-reaching UHF technology in parallel in one identification solution. The Turck RFID system offers tags, read/write heads, connectivity solutions and the corresponding interfaces, which can be flexibly combined depending on requirements. Interfaces are available for PROFINET, EtherNet/IP™, Modbus TCP, PROFIBUS-DP, DeviceNet™, CANopen and EtherCAT®.

the automotive industry has used RFID solutions, mainly for the identification of their vehicle body transport systems. Thanks to improved technology and the automotive knowledge of the RFID specialist Turck, the industry today considers equipping every single vehicle body and component with data carriers, to benefit from a continuous identification and quality control through the whole production process One of the main advantages of RFID: The user can read the authenticity features and also rewrite them to a data carrier. Data carriers (also known as tags) accompany the part through the whole production cycle or quality test; relevant data is written automatically onto the tag and read at the end of the production cycle. Together, with the finished product, there is also a quality management protocol available that shows all production steps of the product, as well as the quality test.

The radar sensors of the QT50 and Q120 series can be used under almost all environmental and climatic conditions. They use FMCW technology (Frequency Modulated Continuous Wave) to detect stationary and moving objects, such as cranes, cars, trains, trucks and cargo.

The HMI controls of the TX500 product series have high-quality displays with brilliant graphics, resistive touch, and a modern processor. They are ideal for use in small to medium-sized machines, whose processes must be controlled, operated, and observed locally. The CODESYS 3 control of the TX500 has the functions PROFINET controller, EtherNet/IP™ and Modbus TCP as well as Modbus RTU Master. When used with Modbus protocols, the HMIs can also be operated as slaves. For visualization the CODESYS 3 target is used.

The programmable gateways of the BL20 (IP20) and BL67 (IP67) I/O systems can be used as autonomous PLCs for control tasks or as network devices for fast signal preprocessing in the periphery. For this, the gateways have a fieldbus interface for PROFINET, Modbus TCP, Ethernet/IP™ or PROFIBUS-DP; in addition the gateways support standard Ethernet and serial communication. The extension modules communicate via the internal module bus with the gateway and can be configured independently of the fieldbus protocol.

  Our pressure sensors detect relative or absolute pressures in liquids and gases. The PS series offers pressure sensors with display and various output variants (switching and analog output) and communication via IO-Link. The PT series includes pressure sensors without display with analog output for media temperatures up to -125 °C. The PC series offers communication via IO-Link. The sensors of the PK-series are especially designed for pneumatic and vacuum applications.

  The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. Short power drops of maximally 50 ms are bypassed independently by the devices. Failsafe operation is enhanced through no-load and short-circuit protection as well as passive air cooling. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.

  Photoelectric sensors and systems use visible or infrared light to detect many different kinds of objects without contact, regardless of their material, quality and consistency. Whether standard or programmable multifunctional versions, compact devices or devices with external amplifier etc., each sensor has special features suited for different applications – with us you find the largest range of photoelectric solutions worldwide.

Magnetic field sensors are used in particular for contactless detection of the piston position in pneumatic cylinders. Using a patented operating principle, our magnetic field sensors detect permanent magnets of different strength attached to the piston in all common cylinders error-free. The sensors operate wear-free, are short-circuit proof, rugged and IP67 rated. We also offer solutions for use in welding or hazardous areas as well as for analog queries.

The degree of automation is very advanced in today's manufacturing technology. At the same time, machine and system hazards have been reduced considerably. This is, in particular, owed to the high demands on the safety technology and the skilled handling of safety functions. For security solutions in mechanical and plant engineering, we offer a choice of powerful, certified components and systems.

  Path measurement can be solved with various sensors. The inductive linear position sensors operate contactless and wear-free according to a revolutionary measuring principle. The position is not detected via a positioning magnet but via an oscillating RLC circuit. The product portfolio comprises magnetostrictive linear position sensors for position tracking in hydraulic cylinders or encoders for the tracking of floats as well as draw-wire sensors. Over a length of up to 40 meters, path information is transmitted in a highly precise and dynamic manner to the higher-level controller via digital and analog interfaces.

  The LED-lighting solutions for industrial requirements offer a wide range of work lights, tower lights and multisegment indicators. Moreover, also tower lights for visual and audible status messages, as well as robust LED work and machine lights. The devices are characterized by low power consumption. Thanks to their long lifetime, the LEDs need not be replaced.

  With the junction systems you can bundle several sensor signals or distribute actuator signals. 2-way splitters are available in the designs M8 x 1, M12 x 1 and 7/8". Passive 4 / 8-way junction boxes are available in the designs M8 x 1, Ø 8 mm and M12 x 1. With these multiple junction systems you can transmit up to 16 I/O signals via a single multicore cable.      

We are offering interface product. Take advantage of the flexibility and versatility the turck interface product portfolio offers: compact designs, a choice of different operating concepts and configurations, as well as a wide range of features for separating, conditioning, processing, converting and adapting digital and analog signals - available as 1 to 4-channel versions, for ex and non-ex applications. You get interface solutions in the required design and with the functionality you need for your application.

  Control and monitor your production seamlessly and comfortable. We have the right automation solution for you - such as programmable gateways, as well as HMI operator panels and controls.

The blenders at Somakon are very popular at the research and development departments of renowned industrial users, because they can be adapted individually to most tasks because of their modular concept. To offer this flexibility at a good price performance ratio, Somakon uses Turck's HMIPLC, VT250, as efficient control and operation unit.The blenders at Somakon are very popular at the research and development departments of renowned industrial users, because they can be adapted individually to most tasks because of their modular concept. To offer this flexibility at a good price performance ratio, Somakon uses Turck's HMIPLC, VT250, as efficient control and operation unit.

  Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts with the target. Their strengths are the enormous durability, reliability, high switching frequencies and a long service life. Through a unique coil concept the uprox® sensors offer the highest switching distance, factor 1 for all metals and, right from the start, the highest operational safety through simple and safe installation.