Vacuum Machine Dealers in Pune

• Country of Origin: India
• Type: Automatic
• Voltage: 220V
• Weight: 90-150 Kg
• Phase: Single Phase
• Sealing Length: 10 Inch
• Power: 0.75-1.5 kW
• Frequency: 50 Hz
• Chamber Size (LXBXH)mm: 440x420x75
• Sealing Speed: 1-4 times/minute

• Packaging Type: Double Chamber
• Weight: 250
• Chamber Type: Double
• Brand Name: SGEI
• Voltage: 230V AC
• Currency: 1
• Made in: India

We are leaders in providing quality Single Chamber Vacuum Pack Machine. We manufacture, supply and export best Single Chamber Vacuum Pack Machine in the industry. The Single Chamber Vacuum Pack Machine, which we offer, is made from best components and material. The Single Chamber Vacuum Pack Machine provided by us is an automatic machine with manual feeding mechanism. Features Silicon Rubber Padding (Which withstand even in fair) Multiple packs can be shrunk simultaneously to save time and energy Safe and convenient to operateRigid, convenient and mobile stand Capable of sealing 6-8 pouches per minute. (Depend on product)Can do up to 4 pouch in 1 cycle of 30 sec. (depend on bag size) Rigid, convenient and mobile stand Minimum maintenance Safe and convenient to operate with single operator

• Packaging Type: Box
• Weight: 50 kg
• Voltage: 230 V
• Chamber Type: Single
• Brand: NCE
• Model Name/Number: DZ4002

Uni Vac system is designed for fully automatic or manual unattended operation. Its primary function is to extract water and light hydrocarbon from oil. The system is operated under a vacuum condition to raise the oil temperature to a desired level. This is done by forcing the oil to atmospheric pressure created in a heating chamber. The oil is then drawn into a vacuum chamber where a thin layer of it is gradually exposed to the vacuum at a very low flow rate. Here it is boiled by heating or through vacuum process with emulsified water, dissolved gasses, air and other low range volatile elements.

• Condition: New
• Automatic Grade: Automatic
• Type: Low Vacuum Dehydration Machine

We are offering low vacuum dehydration machine we are a renowned name when it comes to manufacturing and supplying low vacuum dehydration machine. These low vacuum dehydration machines are used for removing traces of moisture and dissolved air from oil. We ensure that these low vacuum dehydration machines are made with the best quality raw materials. features : long lifeconsistent performanceoptimum qualityfully automatic benefits : improves product quality.removes smaller particles (ie. Carbon, sludge, dust, oxidation) gains oil lifeno clogging or pressure drop.reduces down time.improves life of hydraulic and lubrication oil.improves life of your machine tool hydraulic system.remove oxidation product and retards the oxidation process.requires no supervision during operation.keep oil cleaner than when it come from refinery.

• Thickness: 5mm
• Width: 1000
• Frequency: 50/60 Hz
• Capacity (Pouch Per Hour): 10
• Overall Dimension (LXBXH): 490X270X460mm
• Warranty: 1 Year
• Country of Origin: India
• Diameter (mm): 50mm
• Net Weight: 200
• Usage: Pouch Sealing

Technical Parameter: Capacity - 500kg Dimension - 1.7*0.8M(H*D) Weight - 130kg Power - 7kw Material - Stainless steel materials Function - The store pot about membrane-solutions and separation air and eliminate foam.

We are offering 3 d sublimation machine only @rs 39,000 call on 976300300 vacuum 3 d machine.

• Type: Plastic Vacuum Forming, Vacuum Forming Machine
• Material: Plastic, PVC
• Shape: Rectangular, Round, Square
• Thickness: 0.5 - 3mm
• Color: Grey, Blue
• Feature: Accurate Design, Easy To Use, Hard Structure, High Strength
• Condition: New
• Shaping Mode: Press
• Country of Origin: India
• Color: industrial blue and industrial white or gray

    1. Capable of dry charging automotive and industrial battery negative plates. 2. Batch process gives consistent quality plates with over ninety per cent free lead content.     Plates have high capacity charge retention. 3. No environmental problems. 4. Compact size with low layout cost. 5. Automatic cycle duration of eight to ten hours. 6. Rugged construction. 7. Easy to operate. 8. High productivity. 9. Low maintenance costs. 10. All work instructions documented and given. 11. Maintenance and service manual supplied along with the machine. 12. Operator training provided at our works. 13. Standard components used in the manufacture. 14. All safety parameters considered. 15. No fumes or residual waste. 16. PLC and data logger ensure accurate process control. FAQ's   1. What are the advantages of selling a dry charged battery as against a dry uncharged battery assembled with formed plates? A battery dealer is a person who never wants to displease his customer and at the same time wants to have the maximum business. This is not unusual in any region and understandable from the businessman’s point of view. If a battery manufacturer gives the dealer a dry charged battery the manufacturer and dealer derive the following benefits:- The rest period after acid filling is around 2 hrs. as against 12 to 16 hrs. There are no batteries lying around waiting for charging and occupying costly floor space. The charging duration after acid filling is 8 to 12 hrs. as against 55 to 72 hrs. The need for capital investment in costly chargers is eliminated. The charge input is 1 C as against 3 to 5 C – thereby charging cost is lowered. The inventory carrying cost at dealer’s premises w.r.t. charged battery holding in stock is substantially reduced. The quality of batteries delivered to customers is good since batteries do not get heated during initial charging thereby damaging the internal components of the battery. Due to this reason the battery warranty claims are reduced / eliminated. The possibilities for export of batteries / battery plates open up leading to a wider market penetration. 2. Is it possible to use the dry charging machine for drying industrial battery (stationary & traction) negative formed plates ? Yes – the machine can be used to dry the formed negative plates of any type of lead acid battery. I.e. automotive, motor cycle, SMF, stationary, semi traction or traction battery. 3. In what way is a dry charged battery different from a battery made with formed plates ? In the case of battery made with formed dried plates the positive plates are fully charged whereas the negative plates have discharged after formation due to the oxidation reaction which is an exothermic reaction that has taken place when the plates were taken out of the formation jars. Due to this phenomenon batteries made with formed plates need a long duration of charging at a slow rate of charging i.e. low current input. The input in terms of Ah is also high. Basically the negative plates need to be charged without heating up the positives which are already fully charged. In the case of battery made with dry charged formed negative plates and dried formed positive plates the batteries can be commissioned fast since the negatives are not discharged after formation. 4. For how long a duration do the negative plates stored as plates retain its dry charge characteristics? The retention of dry charge characteristics in negative plates shall depend on the method of storage of plates and the nature and quantity of certain additives in the negative paste mix. If the plates are not exposed to atmospheric moisture and oxygen the period of storage can be as long as 12 to 15 months. It is therefore necessary to cover the fully dried cool plates with polythene wrapping in a suitable manner. Dried silica gel pouches in cotton bags help in keeping plates dry. Further at the time of negative paste mix preparation an addition of oil or stearic acid is recommended. This forms a protective layer on plate surface preventing oxidation of negative plates with a consequent loss of dry charge characteristics. 5. For how long a duration does an assembled battery having dry charged negative plates retain its dry charge characteristics? The retention of dry charge characteristics in an assembled battery shall depend to a great extent on The residual acid in the negative dry plates. The residual acid in the dried positive plates. The residual moisture in the dried positive plates. The sealing of vent holes of the battery to prevent moisture ingress. Since moisture from positive plates can travel to negative plates and start the oxidation process it is necessary to dry the positive plates also thoroughly before assembly.Residual acid in either positive or negative plates can cause deterioration of dry charge characteristics since the hygroscopic sulphuric acid can attract the atmospheric moisture leading to oxidation of negative plates 6. What is the quality parameter which indicates that the dried plates are of acceptable nature? The free lead content in the active material of formed dry negative plates – taken out of the machine after correct processing – is an indicator of the quality of the plate. 7. How can this free lead content be verified? This can be verified by chemical testing in the laboratory. In case detailed procedure of testing is required please contact M/s Unik Techno Systems Pvt. Ltd.. 8. Is there any other simple method which indicates that the dried negative plates are of acceptable quality? A simple indication is available if it is observed that the assembled battery temperature does not increase more than 8 degree Celsius to 10 degree Celsius. sp.gr. does not fall by over 0.02 to 0.04 points. over a one hour period after filling of acid in the battery. 9. How important is the washing of negative plates prior to dry charge process? It is important to wash the negative plates free of acid and check whether the wash water pH is between 5.5 to 6.0 prior to loading the plates on to the dry charging chamber. Please note that it is equally important to load the washed plates into the machine within an hour of such a complete wash – free of acid. In case the plates have to be stored for a long period in water after washing, it is necessary to retain some acidity in the water. Hence it is recommended to do the washing in two stages. In stage one wash plates such that the wash water pH is around 4.5 to 5.5. Keep negative plates in a tank of such an acidic water. As and when the negative plates are to be dried and approx. an hour or so prior to loading into the machine the second stage of washing can be carried out i.e. plates can be washed to a pH of 5.5 to 6.0. If the plates are not washed completely free of acid prior to loading on to the machines the seals of the vacuum pump shall get damaged leading to machine breakdown and production downtime.

• Weight: 5kg
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Material: Metal
• Warrenty: 1 Year
• Use: Medical
• Finishing: Polished

Surgical suction machine

• Automatic Grade: Semi-Automatic
• Voltage: 230V
• Weight: 10Kg
• Brand Name: Jal
• Country of Origin: Made in India
• Features: Durable,Minimal maintenance,Industry approved design
• Chamber Type: Double

Manufacturing has an extensive range of specialist machinery consists of 3 Automatic Vacuum Forming Machines, 2 Thermoforming Machines & 1 In Mould Cutting Pressure Forming Machine. Enabling us to thermoform virtually any plastic thickness and size and our machinery ensures the highest quality finish.

Blasting is the simplest and most effective way to remove rust, old paint and other materials from various surfaces. The Nederman vacuum blaster is a clean, dust free vacuum blaster that leaves the surface cleaned and well prepared for auto bodywork filling and painting etc. The grit is recycled and can be reused many times over. The SB 750 vacuum blaster is suitable for smaller-scale and lighter work.

• Chamber dimensions (L1xW1xH1) (mm): 400 x 450 x 120
• Max pack size (mm): 360 x 360
• Seal length L2 (mm): 360

Tabletop Vacuum Packaging Machine with dome lid is ideal for bulky products. Microprocessor based. Dome type lid, Sensor based system for accuracy. Sturdy and heavy gauge design. See through lid. User-friendly consumable replacement. Digital Display. Stainless steel body and contact parts. Emergency stop button. Electrical protection systems.

• Automatic Grade: Automatic
• Power: 16 KW
• Brand Name: NIHIRA
• Voltage: 415 V
• Capacity: 500kg/hr, 1000kg/hr, 2000kg/hr
• Body Material: Stainless Steel
• Phase: 3 Phase

Oil is indirectly heated and fed into a vacuum chamber where it is dispersed into a thin film to vaporise water and dissolved gases at low temperature. The air and gases that evolve are condensed and removed from oil. Ultimate water removal through re circulation is zero percent water content or 5O% below saturation level. Soluble gases and air are also removed to 50% of saturation level. Indirectly heating oil at low temperature ensures there is no burn off, no oxidation and no additive depletion. Cracked low molecular weight oil, which is a by-product of the oil oxidation process, which accumulates in the hydraulic or lubrication fluid, accumulates in Oil.