Ball Valves Dealers in Kothrud, Pune

Air Release Valves BEP Ball Float vents are designed for automatic removal of air & non-condensable gases from liquid lines. The gas accumulated in the upper part of the valve installed at the highest point creates the pressure and thereby lowers the float which opens the outlet orifice & discharge the gas to the atmosphere. The plug valve type discharge orifice of vent valve ensures efficient & maintenance free operation with zero leakage. BEP vents are very much suitable for venting of Water/oil pipelines, storage tanks & process equipment.

• Features: Reliable, Widely used, Optimum quality

• Type: Continuous Blow Down Valve, Intermittent Blow Down valve
• Brand Name: IndiTech Valves Private Limited
• Material: Carbon Steel, Alloy Steel
• Pressure: Upto 220 bar
• Media: Water & Steam
• Temperature Of Media: Saturated
• Model Number: IVPL- IBDV, IVPL- CBDV
• Place of Origin: PUNE, INDIA

The primary function of a blowdown valve is to control the concentrations of suspended & total dissolved solids (tds) in the boiler. Boiler blowdown is a severe service application which results in rapid erosion and wearing out of conventional valves. Continuous blowdown (cbd) valves are designed to operate in continuous open position by releasing water continuously through a blowdown tap near the boiler water surface, thereby maintaining the tds level in the boiler drum. Inditech continuous blowdown valve is an angle type valve with a needle shaped trim in a venturi diffuser. The venturi diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.

• Material: Carbon Steeel, Cast Iron, PP, Stainless Steel, UPVC
• Color: Blue, Red, Sky Blue, White
• Power: Hydraulic, Manual, Solenoid
• Pressure: 1000Kpa, 520Kpa
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Port Size: 0.1mm-5cm, 2cm -50cm, 5cm-60cm, 6cm-20cm
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5
• Number Of Way: 2way, 3way, 4way
• Type: Motorized Ball Valve
• Technics: Gear Operated, Hard Sealing

• Material: Brass/Bronze
• Pressure: 16 bar
• Application: Air, water, gas
• Coil Voltage: 230V, 110V , 48V, 24V , 12V  AC ; 110V , 48V , 24V , 12 V DC
• Media: Water
• Brand Name: TORK
• Valve Size: 1/8", 1/4"
• Actuation Type: Direct Acting
• Series: S1073 
• Seal: NBR, on request VITON
• Temperature: -10°C…80 °C
• Position: Normally Closed

Our Manufacturing & Supply Scope   Body Stem Ball

We offer silo bottom butterfly valve. Vfs butterfly valves consist of two high pressure, die cast semi-bodies manufactured from aluminium alloy, a swivel disc in sint polymer composite or cast iron and a pre-stressed elastomeric seal.

• boiler pressures: 10.55 kg/cm² (150psig).

Raw water contains impurities in the form of dissolved gases, dissolved Solids and suspended solids. Chemical water treatment may modify the form of the impurities but will not completely remove them and will normally increase the dissolved solids level. As steam is evaporated the concentration of total dissolved solids (TDS) increase in the boiler water. If the TDS concentration is allowed to get too high then carryover of boiler water with stem will occur. This carryover can cause serious damage to the steam and condensate systems through corrosion and deposition on heat transfer surfaces. The consequent product contamination cannot be tolerated in application where steam is used in food, drink and medical sterilization processes.

KF Clamp, Auto Control Divert Valve

gas ball valve, Foot Valve

resilient seated butterfly valve, Pvc Butterfly Valve, Wafer Butterfly Valve

Blow Down Valves, pressure reducing cum desuperheating valve

Castings, engineering good, globe valve bonnet casting