Check Valves Dealers in Chakan, Pune

• End Connection: BUTT WELD AS PER ASME B16.25 / SOCKET WELD AS PER ASME B16.11 / SCREWED AS PER ASME B1.20.1
• SIZE: 1/2"TO2"
• PRESSURE CLASS: 800,1500,2500
• Bolted Bonnet: 800
• Welded Bonnet: 1500 & 2500
• Design Standard: API602 / ASME B16.34
• Inspection Standard: API598
• Face To face: MFG.STANDARD
• Body: ASTM A105N / ASTM A350LF2 /ASTM A182F11-CL2 /ASTMA182 F22-CL3 / ASTMA F91 /ASTM A182304L / ASTM A182F316L
• Plug: ASTM A217GR.CA15 / ASTMA276 TYPE 410 / ASTM A217GR CF8MSS316 / ASTM A217GR.CF8SS304 / MONELALLOY-20/ HAST-ALLOY
• Seat: ASTM A276 TYPE 410 SS316 SS304/ ASTM AA276 TYPE 410 + ST6
• Spring: SS316
• Bonnet Gasket: SPIRAL WOUNDED 316 + GRAPHITE

• Body / Bonnet: ASTM A 182 Gr F 304 / F 316
• Trims: 18 Cr 8 Ni / 18 Cr 10 Ni 2 MO
• Mfg Std: API 602 / BS 5352
• Insp & Test Std: API 598 / BS 6755
• Ends: SCREWED TO BSP / BSPT / NPT , SOCKETWELD TO ANSI B 16.11
• Hyd-test Pressure: BODY : 3000 Psig (211 Kg/Cm2 ) , SEAT : 2000 Psig (140 Kg/Cm2 )
• Size Range: 15 MM TO 50 MM

• Material: Cast Iron
• Valve Size: 65 mm
• Media: Water
• End Connection: Socket Weld
• Color: Blue
• Size: 22 inch
• Pressure: 85 psi
• Design Type: Ball Valve Design
• Brand: Tiger

• Material: Stainless Steel
• Color: Silver
• Condition: New
• Packaging: As per client requirement

Features : Accurate size Steel body Easy to install Less maintenance Perfect functionality Strong and sturdy finish

The Double Solenoid Valves by SAMSON are solenoid operated which direct and regulate the pressure. The sturdy body gives it high resistance to heat, corrosion and rusting.

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations.

• Type: Non Return Valve
• Brand Name: Schmalz
• Material: Brass

Non-return valve maintain the vacuum in the case of a power failure or a failure of the vacuum generator. Thye can also be used with energy-saving systems when handling non-porous materials

• Voltage Range: 24 Volt DC, 110 VAC, 230 VAC.
• Application: Used as Safety Valve in power Press & for Clutch / Brake controls.
• Specification: 3/2 NC Connected Valve

Counted amongst the praiseworthy organizations, we are instrumental in providing a qualitative assortment of Dual Sensing Solenoid Valves that is checked against various parameters. Benefits :1. Assured leakless performance for years.2. Protection against premature failure3. Can withstand harsh operating conditions.     Product Details : Rugged structure Compact design Easy maintenance Hassle free performance Easy installation Long lasting nature     Industries : Textile Milk industries Machine fabrication Clutches and Brakes Rubber & tyre plants Automobile Chemists Ink Paper Mill Pharmaceuticals       Electro pneumatics makes pneumatic valves suitable for compressed air, water, vacuum, gases and low pressure oil. They are available as solenoid-operated, pneumatically-operated and manually-operated. Solenoid coils are available for AC and DC voltages. The valve range consists of  Directional control valves - 2, 3, 4 - way, 2, 3 - position, single / double solenoid, direct / pilot / pneumatically / manually operated Flow control, check and needle valves Quick exhaust valves Shuttle valves Rotor seal couplings Dual sensing valves Rotary actuators Stackable valves - 2, 3, 4 - way, 2, 3 - position, single / double solenoid Accessories like silencers, mufflers, air preparation unitsSize - ½", ¾ ", 1", 1 ½" BSPOrifice - ½", ¾ ", 1", 1 ½"Pressure Range - 25 TO 125 P. S. IApplication - Can be used as safety valve in power presses and clutch and brake applications. Valves are supplied with switch reactors.

Dual acting valve, Press Machine, Clutch Assembly

• Type: Double Flap Valve
• Material: Carbon Steeel, Metal, Stainless Steel
• Length: 100-200cm, 200-400cm, 1000
• Application: Industrial Use
• Color: Black, Blue
• Feature: Durable, Easy Maintenance., Rust Resistant And Unmatched Quality
• Pattern: Plain
• Condition: New
• Structure: Vertical
• Warranty: 1yr
• Automation Grade: Automatic, Manual
• Country of Origin: India

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: IPL Std
• Number Of Way: 2way
• Brand Name: IPC
• Pressure Rating: #150, #300
• Sizes: 2" to 24"
• Size: 2"to 24"
• Type: Eccentric, Lug, Wafer
• Technics: Gear Operated
• Power: Hand Wheel / Gear wheel Operated
• Pressure: 1000 Kpa, 520 Kpa
• Structure: STD
• Feature: Durable
• Port Size: 50mm to 600 mm
• Media: liquid / gases
• Mfg Standards: API 609 / BS EN 593
• Testing Standards: API 598 / BS EN 12266 -1
• End Details: ASME B 16.5
• Face To Face: API 609

• SIZE RANGE: 40mm TO 400mm
• PRESSURE TESTING: BODY: 1.5 X PN
•  : SEAT : 1.1 X PN
•  :  
• PRESSURE RATING -KPa:  
• 40mm TO 125mm: PN 1.6
• 150mm TO 300mm: PN 1.0
• 350mm & 400mm: PN 0.6
• INSTALLATION: VERTICAL
• TEMPERATURE: SUITABLE UPTO 800C

• Media: OIL
• Condition: New
• Brand Name: POLYHYDRON
• Size: 1/2 inch
• Pressure: High Pressure
• End Connection Type: THREADED
• Model: CI10T1

• End Connection: Wafer/Flanged
• Valve Type: Single plate wafer type, Pressure sealed bonnet type, Spring loaded dual plate
• Body Type: Wafer/Flanged
• Size Range: DN 25 – DN 900
• Class: Class 150/Class 300/PN6/PN10/PN16
• Testing: MSS SP-61/API 598/EN 12261 Prt 1

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations. These are very slow operating valves as the operation cycle rate does not usually exceed beyond 6 cycles per minutes. Thus these valves have a batch feeding pattern rather than continuous feeding. Selection of Cone or Flap depends on the characteristics of material to be handled and system requirement like pressure sealing. Cone valve has a better sealing than the Flap valve. However, in smaller size valves the Cone can act as an obstruction in the flow resulting in clogging of the small opening. The Cone valves usually have round opening whereas the Flap valves can have square.

PARTH VALVES AND HOSES LLP is pleased to offer top-of-the-line products in pipeline flow control. The PARTH VALVE AND HOSES‘s Non Return Valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. The PARTH VALVE AND HOSES‘s Non Return Valves Have been designed to include state-of-the-art features that are described in this bulletin. TECHNICAL DADA  PARTH VALVES AND HOSES has extensive experience in manufacturing wafer type, Swing type, In-Line type and Non-Slam Check Valves. Size : ½” up to 12“ (DN 15 up to DN 300) Pressure Rating : PN10 & PN16 Materials : CI WCB,SS304, SS316, Carbon Steels, Polypropylene Design Standard : API 6D Temperature Rating : 80 degree to 180 degree. Test (Inspection) Standard : API 598 Construction Details : Bolted Cover / Pressure Seal Bonnet, Lift Check Type, Swing Check, Piston Check, Tilting Disc, Non – Slam Check End Connection: Screwed, Socket Weld, Flanged, Hub End, Butt-Weld Operator / Actuator : Manual SALIENT FEATURES  Compact : Requires little space in piping systems due to the short overall length. Light Weight : Wafer Check valve is much less in weight compared to conventional flanged end Swing Check valves. Bubble Tight Shut-off: The replaceable soft seal fitted in the body ensures a tight shut-off to prevent backflow. Long life of Seat Rings: The seat rings are fitted in the body in order to prevent contact with the flow, which results in longer life of the seat rings. This also ensures the retention of the seat rings in its original position. (i.e. the seat rings are not lost in the pipe due to the flow pressure) Easy Ft space saving installation : The valves are installed between two flanges and centering is achieved by means of body rim (outside diameter) Extremely low opening pressures. Easy to handle and maintain. Higher sizes available with counter balance and hydraulic cushioning on request. Low pressure drop: Decreasing with increasing valve size. Available in different materials of construction. Available in wide range of sizes We are Manufacturer, Exporter, Supplier, Authorized Dealer & Solution Provider. Our setup is situated in Pune, Maharashtra, India & majorly we serve our customers from countries like Shri Lanka, Bhutan, Bangladesh, Malaysia, Indonesian, Nepal, Europe, Africa, Gulf countries like UAE, Dubai, Bahrain, Oman, Qatar, Saudi Arabia, Egypt, Jordan, Lebanon, Syria, Yemen, Kuwait etc.

Our Manufacturing & Supply Scope   Body Cover

• Material: PP
• Color: White
• Pressure: Medium Pressure
• Features: Prevent back flow and water retention, Locomotive stability, High anti-galling properties
• Temperature: 70 Degree C

We are engaged in offering a comprehensive range of Forged Steel Class 800 Check Valves that are acclaimed for application specific design and sturdy construction. Available in various technical specifications. Product Feature Split Body Design Facilitates Inspection and Repair Investment Cast Body Construction 'Blow-Out Proof Stem Internal Anti-Static Device Triple Stem Sealing Above 2' Size ISO 5211 Mounting Dimension for Easy Automation

• Material: Cast Iron
• Brand: Parth
• Technique: Hot Rolled
• Finishing: Polished