Check Valves Dealers in Pune

• Type: Check Valves
• Material: Stainless Steel
• Brand Name: Schmalz

Check valves close the vacuum lines of uncovered suction cups. This maintains the system vacuum. Flow restrictors constrict the vacuum line. They are used predominantly in the handling of porous parts.

We are leading manufacturer and exporter of Flap Valves Manufacturers, Flap Valve, Flap Valve Manufacturer, Manufacturer and exporter of Flap Valve, Flap Valve Manufacturer In india.We are Offering Flap Valves, Bolt cover,structure of flip-chip balance able pressure and light onoff operation.An oil grove is set between valve body and seal surface,which may infuse the seal grease to increase the seal capability.

• Material: Metal
• Structure: Check
• Media: Water
• Mounting Type: Vertical
• Specialities: Non Breakable, Heat Resistance, Durable
• Pressure: 413 Bar
• Operating Temperature (F): -58ºF to 131ºF

• Voltage Range: 24 Volt DC, 110 VAC, 230 VAC.
• Usage: Used as Safety Valve in power Press & for Clutch / Brake controls.
• Specification: 3/2 NC Connected Valve

Counted amongst the praiseworthy organizations, we are instrumental in providing a qualitative assortment of Dual Sensing Solenoid Valves that is checked against various parameters. Benefits :1. Assured leakless performance for years.2. Protection against premature failure3. Can withstand harsh operating conditions.     Product Details : Rugged structure Compact design Easy maintenance Hassle free performance Easy installation Long lasting nature     Industries : Textile Milk industries Machine fabrication Clutches and Brakes Rubber & tyre plants Automobile Chemists Ink Paper Mill Pharmaceuticals       Electro pneumatics makes pneumatic valves suitable for compressed air, water, vacuum, gases and low pressure oil. They are available as solenoid-operated, pneumatically-operated and manually-operated. Solenoid coils are available for AC and DC voltages. The valve range consists of  Directional control valves - 2, 3, 4 - way, 2, 3 - position, single / double solenoid, direct / pilot / pneumatically / manually operated Flow control, check and needle valves Quick exhaust valves Shuttle valves Rotor seal couplings Dual sensing valves Rotary actuators Stackable valves - 2, 3, 4 - way, 2, 3 - position, single / double solenoid Accessories like silencers, mufflers, air preparation unitsSize - ½", ¾ ", 1", 1 ½" BSPOrifice - ½", ¾ ", 1", 1 ½"Pressure Range - 25 TO 125 P. S. IApplication - Can be used as safety valve in power presses and clutch and brake applications. Valves are supplied with switch reactors.

The structure of brass non return valve by KKI is easy to install and corrosion resistant. The perfect finish enables smooth flow of working in industries.

We understand that chemical and physical invasions can cause damage to products and hamper the quality. Thus, we ensure our products are packed securely using premium packaging materials. Our team makes it possible to carry out online transactions, keeping the details confidential. Our payment procedures and the transactions we make are completely transparent and thus, clients can trust on us.

Disc Check Valves from Forbes Marshall are spring loaded, non-return valves which allow flow only in one direction. When fitted at the outlet of traps discharging into closed systems, they prevent the back-flow of discharged condensate into the system. Forbes Marshall spring loaded disc check valves offer a tight shutoff and are available in a large range of sizes. These valves are compact in design as compared to the conventional swing and lift type of disc check valves. They can be easily mounted in between flanges in any direction. These valves are compatible with both PN and ANSI flanges.

• Material: Carbon Steeel, Metal
• Certification: ISO 9001:2008 Certified
• Application: Disc Checking
• Color: Multi Colour
• Pressure: High Pressure, Low Pressure
• Structure: 1war
• Feature: Blow-Out-Proof, Casting Approved, Durable
• Type: Check Valve
• Power: Air, Manual
• Temperature Of Media: Normal Temperature

Making judicious use of our high tech facility and latest equipment, we have established ourselves as a top player in the industry. The product range includes, Globe/Stop Valves and Safety and Relief Valves  (Bellow Sealed Safety Relief Valves, Bellow Sealed Globe valves), High Pressure Angle Pattern Drain Valves (Single Stage and Multi-Stage), Angle Pattern Blow Down Valves, High Pressure #2500 Control Valves, Turbine Bypass Valves, H P Heater Bypass Valves, Isolation valves including the Gate Globe , Swing Check and Ball Valves range. We offer Gate Globe Check Valve to our esteemed customers at attractive price. It boasts striking features such as durability, strong built and light weight. Our excellent distribution system facilitates quick delivery to your doorstep in no time at affordable prices.

Auxiliary fuel injection into Blast Furnace made easy and safe!!! Features •Ensures immediate closure of the valve as soon as the fuel injection lance is removed •Free floating SS ball •Body cavity design ensures smooth lifting of the ball on insertion of lance with minimal effortsforce •Diamond lapped seating area ensures gas tight closure •Additional safety by using the blanking bush which provides the secondary sealing •Sealing surfaces of seat, lance holder and blanking bush are CNC machined and diamond lapped to ensure gas tight joints •Proven design facilitating on line removal and insertion of injection lance into blast furnace. Size 50 NB Pressure Rating Class 150, PN 40 End Connection Flanged Material of construction Body- A216 WCB Ball- SS 316 Seat- CA 15 Lance holder- SS 410 Blank bush- SS 410 Installations JSW Steel Ltd. Bellary Bhilai Steel Plant,Bhilai Bokaro Steel Plant, Bokaro Rourkela Steel Plant, Raurkela Durgapur Steel Plant, Durgapur Jayaswal NECO Ltd, Raipur Jindal Steel & Power Ltd.

Introduction :  Refrigerants : Applicable to all common non flammable refrigerants including R717 and non corrosive gases/liquids dependent on sealing material compatibility. Standard version : - 46/+150°C Pressure range : Range The valve are designed for max. working pressure 40 bar g (580 psig).   Features The valve Designed to open at a very low differential pressure of 0.04 bar (0.58 psig) Designed with a built-in damping chamber preventing valve flutter, due to low refrigerant velocity and low density Easy to disassemble for inspection and service Internal back seating enables replacement of the spindle seal whilst the valve is active in under pressure Optimal flow characteristics ensuring quick opening to the fully open position.   Housing : Made of special, cold resistant steel. Valve cone : The valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle : Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing : Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.

• Size: 63 mm
• Material: Gunmetal / SS
• Inlet: 100 mm
• Quality: ISI Marked

Avail from our high quality range of Double Headed Hydrant Valve at affordable prices. Our Double Headed Hydrant Valve has 63mm double controlled hydrant valve with 100mm NB inlet. It is designed as per IS : 5290 type B. Double Headed Hydrant Valve offered by us is sturdy, reliable and provides minimum maintenance for a long period of time. Customers all over the world can avail them from us at market leading prices.

• Valve Size: 4 Inch 
• Brand Name: Ace Hydraulic
• Material: Mild Steel
• Max flow rate (L/min): 40 min
• Operating Pressure (MPa): 31.5 MPa
• Usage/Application: Industrial

• End Connection: BUTT WELD AS PER ASME B16.25 / SOCKET WELD AS PER ASME B16.11 / SCREWED AS PER ASME B1.20.1
• SIZE: 1/2"TO2"
• PRESSURE CLASS: 800,1500,2500
• Bolted Bonnet: 800
• Welded Bonnet: 1500 & 2500
• Design Standard: API602 / ASME B16.34
• Inspection Standard: API598
• Face To face: MFG.STANDARD
• Body: ASTM A105N / ASTM A350LF2 /ASTM A182F11-CL2 /ASTMA182 F22-CL3 / ASTMA F91 /ASTM A182304L / ASTM A182F316L
• Plug: ASTM A217GR.CA15 / ASTMA276 TYPE 410 / ASTM A217GR CF8MSS316 / ASTM A217GR.CF8SS304 / MONELALLOY-20/ HAST-ALLOY
• Seat: ASTM A276 TYPE 410 SS316 SS304/ ASTM AA276 TYPE 410 + ST6
• Spring: SS316
• Bonnet Gasket: SPIRAL WOUNDED 316 + GRAPHITE

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations.

• Type: Double Flap Valve
• Material: Carbon Steeel, Metal, Stainless Steel
• Length: 100-200cm, 200-400cm, 1000
• Application: Industrial Use
• Color: Black, Blue
• Feature: Durable, Easy Maintenance., Rust Resistant And Unmatched Quality
• Pattern: Plain
• Condition: New
• Structure: Vertical
• Warranty: 1yr
• Automation Grade: Automatic, Manual
• Country of Origin: India

• Valve Size: 1 inch to 4 Inch
• Material: SS
• Working Temperature: 240 Degree C
• Color: Grey
• Application: Chemical Industries and Beverage industries.
• Pressure: 10 Bar
• Connection End: SMS Union or Plain End
• Surface Treatment: CNC Finish
• Thread Type: Round
• Grade: SS 304
• Gasket : Nitrile/ Silicon/EPDM
• Maximum Tested Pressure: 10 BAR
• Minimum Working Pressure: -1 BAR
• Maximum Vacuum: -9 BAR
• Maximum Temp:  95°C
• Minimum Temp: -20°C

• Material: Stainless Steel
• Color: Silver
• Condition: New
• Packaging: As per client requirement

Features : Accurate size Steel body Easy to install Less maintenance Perfect functionality Strong and sturdy finish

• Type: Dump Valve

DeGATECH dump valve (also known as a double dump valve, flat gate valve, or double flap gate valve) controls the rate of material flow through a system more efficiently than a rotary valve. Because there are two gates, one of which is always closed, the pressure drop from inlet to outlet is always maintained. A dump valve endures much less wear and tear than a regular rotary valve, making it last longer and keeping maintenance costs down. Our dump valves are available with pneumatic, gravity and electric operators. These valves are widely used in the following industries: cement, fly ash, iron ore, paper, and bulk powders.

• Feature: Highly demanded, Various sizes,Reasonable price,High strength

• Size: 2
• Brand Name: IPC
• Material: Alloy Steel, Carbon Steel, Cast Steel
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60Kg, 60-70kg
• Color: IPL Std
• Pressure: High, Low, Medium
• Feature: Durable
• End Connection: Flanged
• Media: Air Fuel, Gas, Water
• Type: Cast Steel Check Valve
• Power: Na
• Port Size: 2
• Temperature Of Media: ( -29 To 480 )Deg Centigrade
• Pressure Rating: #150 Through #2500 (Higher Pressure classes available on request)
• Sizes: 2
• MFG Standards: API 6D / API594 / BS 1868 / ASME B16.34
• Standard Connections: Flanged / Butt-weld
• Surface Finishing: Polished

The dual tunnel Diverter Valve is designed to divert product in dilute dense phase conveying systems to number of destinations.Shortest possible switchover time as designed with two separate channels. - Powerful pneumatic Actuator centre connected to plug through linkages. - Designed for Maximum system pressure of 6 bar g. - Designed for Maximum solids temperature of 120 deg.C. - Available sizes 50 NB to 200 NB. - Either static or dynamic seal. - Housing in die cast aluminium construction with inserted Stainless steel pipe if required.