Gate & Sluice Valves Dealers in Warje, Pune

• Application: Misting System
• Size: 1/8" to 1/4" BSP
• Pressure: 0 bar to 100 bar

The Samson make Type 41-23 self-operated universal pressure reducing regulator is a standard size regulator (1/2" - 4") designed to work in all general industrial applications. A pressure reducing valve is used for controlling the downstream pressure (p2) to an adjusted set point. The design of a pressure reducing regulator valve is to close when the downstream pressure rises above a set value.These valves are self-operated in that the downstream pressure being controlled is tapped downstream of the Pressure Reducing Valve and transmitted via a control line to the operating diaphragm of the Type 41-23 where it is converted into a positioning force.   Special features of Pressure Reducing Valve: Low-maintenance proportional regulators requiring no auxiliary energy Frictionless plug stem seal with stainless steel bellows Control line kit available for tapping the pressure directly at the valve body Wide set point range and convenient set point adjustment using a nut Exchangeable set point springs and actuator Spring-loaded, single-seated Pressure Reducing Valve with upstream and down stream pressure balancing by a stainless steel bellows Soft-seated plug for high shut-off requirements Standard low-noise plug Special version with flow dividerSt I or St III (NPS 2½ to 4/DN 65 to 100) for further noise level reduction All wetted parts free of non-ferrous metal   Application of Pressure Reducing Valve: Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN 15 to 100) Pressure rating Class 125 to 300 (PN 16 to 40) Suitable for water,gases, and vapors up to 660 °F (350 °C)

Brass (IS 319) - Standard (AL MS S.S. also available). Finish Nickel plated-Standard. (TinCadmiumChrome also available) Threads BSC - Standard (In PGMetricNPTBSP-also available) Ref. Standard IS 2148 - 1981 CMRI Certificate No CMRITCPH638, Application Flamepoof used in flammable gas vapor area (Gas l, llA and llB)

Most modern boilers generate steam at high pressures & temperatures. High pressure steam has lesser volume than steam at atmospheric pressure, thereby translating into smaller boiler size & lower diameter of steam piping. Also, high temperature (superheated) steam has more energy, which translates into higher efficiency for power generating steam turbines.

We are the main supplier of this product.

• Material: Aluminium, Brass/Bronze
• Media: Air, Gas, Fuel

• Size: 2 Inch
• Brand Name: Eurosia
• Pressure: High
• Color: Black
• Material: Cast Iron
• Country of Origin: Made in India
• Media: Water
• End Connection Type: Flange
• Automation Grade: Manual

Pressure Regulating Valve is ideal for application where downstream pressure requirement is constant. They are used in various process lines, Stream, Nitrogen Blanketing systems, Fuel control systems and LPG distribution systems. Rutcon PRV provides a reliable and economic solution for Pressure Regulation. Sizes : ½� to 8� (15mm to 200mm) Higher sizes available on request Ratings : ANSI B 16.5 150# and 300# other standards available on request. Application : Used in fertilizers, chemical, and pharmaceutical plant etc. and other process industries commonly used for burner fuel oil pressure regulation, nitrogen blanketing system, etc. Design & Performance Features Used for long trouble free serviceValve Disc is reversible and can be changed quickly for renewed lifeSelf actuating type, does not require any auxiliary energyRange of body & diaphragm material combinations to meet majority of requirementsPressure balanced design, any fluctuations in the inlet pressures has negligible effect on the regulated pressure

• Size: 15 to 900 mm

Complies to:API-600 API-6D ASME B16.34 BS-1873 BS-1868 API-602 BS-5352 – Check the std, Type :Forged Steel Cast Steel, Rating:ASA-150-300-600-800-900-1500-2500, Ends:Flanged SWE BWE Screwed (BSPNPT)

FM Approved Gate Valve India's first and only valve manufacturer to get the Certificate of Compliance from Factory Mutual for its fire service water control valves, which covers Outside Screw & Yoke and Non-Rising Stem Gate Valves (Metal Seated)   Features: Metal to metal seating for longer service life Rigid and sturdy design with minimum loss of head across the valve Accurate interchangeability of components Accurate parallelism between side flanges Equal taper between wedge faces Perfect machining and press fitting of body and wedge rings Excellent finish on spindle threads resulting in low friction and smooth operation of valves Leak-tightness even after thousands of Open / Close   Applications: Fire service water control valves

Located in Pune(India), our organization is involved in catering to the market with a qualitative array of products. One of the major concerns of the organization is to make available only quality approved products to the buyers and thus we check the entire range at all stages.

• Material: Stainless Steel
• Valve Size: 1.5 inch
• Operating Pressure: Up to 3,700 psig
• Process Fluid: Liquid
• Body Style: Angled and Inline
• Set Pressure: 50 psi

Knife Gate Valves, Foot Valves, Surge Arresters, industrial globe valves

pilot operated relief valve, turbine meters, totalizers, Flow Computers

• Application: Oil Fitting
• Feature: Anti Dust, Blow-Out-Proof

VCP Pressure Relief Valves are the last resort when abnormal pressure conditions endanger the silo structure. That is why sudden excess or suction pressure inside the silo must be dealt with instantaneously.

Metal Seated Gate Valve, pneumatic globe valves, ss angle valves

resilient seated gate valves

safety, Equity, venture funding service

High Pressure CNG Solenoid Valves, lpg filters, LPG Filter Solenoid Valves