Virak Engineering Works Mulshi, Pune, Maharashtra

We bring forth an assorted range of Universal Dividing Head high on demand in the market. The Universal Dividing Heads are available in DRU and DRW series. Salient Features : Seasoned casting & rigid construction for better performance and reduced weightSpindle locking arrangementArrangement for center locking pin to both Dividing head and Tail stock for ensuring parallel centre lineTail stock housing machined (boring) to move parallel to X axis by splitting housing at length way to ensure straight boreIndex plates each holes are machined accurately by indexing with 1:40 Specifications TypeCenter Height(mm)RemarksDRU-115115With gear set trainDRW-115115UngearedDRU-140140With gear set trainDRW-140140UngearedDRU-165165With gear set trainDRW-165 165Ungeared DRW - Design to manufecture simple indexing gears as spur gear, bewel gear, worn gear tooth, her squre slots nos. 8, 12, 7 and more like that 40, 60, 100 nos. Ans so.DRU - DRU series designed for differential indexing as well as simple indexing. Head can ne swivalled at 90o to horizontal and more upt to 10o as well as below horizontal 10o application � to manufecture drill, remer of thelix angled taps etc. Spur gears, worm gear tooth, slots odd in nos. And even in nos., as required 2,4,6,12, 40, 60, 64, 100 etc. We manufecture the DRU and DRW Series Dividing Head � LEFT HAND AND RIGHT HAND TYPE We Symbol it as when operator is standing in front of Milling Machine or work piece while working on Milling Machine Deviding Head is mounted at LEFT SIDE of the operator it is LEFT HAND TYPE and when it (HEAD) is mounted at RIGHT HAND side it is RIGHT HAND TYPE. We supple standard as LEFT HAND MOUNTING TYPE. Specification ofDRU and DRW SeriesDRU-115DRW-115DRU-140DRW-140DRU-165DRW-165Ratio of werm and werm gears1:401:401:40Height of Centre115mm140mm165mmSpindle bore20mm20mm25mm Spindle TaperMT4MT4MT4Lenght of base230mm250mm270mmWidth of base 130mm145mm180mmWeight (approx) DRU 53 kg.78 kg.89 kg.Weight (approx) DRW35 kg.61 kg.71kg. Standard Accessoreis : Dead CentreTail Stock Extra Accessories : Back PlateSelf Centring True chuck Index plate having holes : 1stside 31, 27, 23, 21, 92ndside 30, 24, 20, 18, 16 For DRU Series change Gear bracket with 2 sleeves and set of 13 change gears 24(2), 28, 32, 36, 40, 44, 48, 56, 64, 72, 86, 100 Note : While ordering DRU or DRW series Dividing head please order it LEFT HAND TYPE (Dividing head monted at LEFT side of the machine standing infront of the machine) If required RIGHT HAND TYPE (Dividing head mounted at Right side of the operator)

We bring forth an assorted range of Universal Dividing Head high on demand in the market. The Universal Dividing Heads are available in DRU and DRW series. Salient Features : Seasoned casting & rigid construction for better performance and reduced weightSpindle locking arrangementArrangement for center locking pin to both Dividing head and Tail stock for ensuring parallel centre lineTail stock housing machined (boring) to move parallel to X axis by splitting housing at length way to ensure straight boreIndex plates each holes are machined accurately by indexing with 1:40 Specifications TypeCenter Height(mm)RemarksDRU-115115With gear set trainDRW-115115UngearedDRU-140140With gear set trainDRW-140140UngearedDRU-165165With gear set trainDRW-165 165Ungeared DRW - Design to manufecture simple indexing gears as spur gear, bewel gear, worn gear tooth, her squre slots nos. 8, 12, 7 and more like that 40, 60, 100 nos. Ans so.DRU - DRU series designed for differential indexing as well as simple indexing. Head can ne swivalled at 90o to horizontal and more upt to 10o as well as below horizontal 10o application � to manufecture drill, remer of thelix angled taps etc. Spur gears, worm gear tooth, slots odd in nos. And even in nos., as required 2,4,6,12, 40, 60, 64, 100 etc. We manufecture the DRU and DRW Series Dividing Head � LEFT HAND AND RIGHT HAND TYPE We Symbol it as when operator is standing in front of Milling Machine or work piece while working on Milling Machine Deviding Head is mounted at LEFT SIDE of the operator it is LEFT HAND TYPE and when it (HEAD) is mounted at RIGHT HAND side it is RIGHT HAND TYPE. We supple standard as LEFT HAND MOUNTING TYPE. Specification ofDRU and DRW SeriesDRU-115DRW-115DRU-140DRW-140DRU-165DRW-165Ratio of werm and werm gears1:401:401:40Height of Centre115mm140mm165mmSpindle bore20mm20mm25mm Spindle TaperMT4MT4MT4Lenght of base230mm250mm270mmWidth of base 130mm145mm180mmWeight (approx) DRU 53 kg.78 kg.89 kg.Weight (approx) DRW35 kg.61 kg.71kg. Standard Accessoreis : Dead CentreTail Stock Extra Accessories : Back PlateSelf Centring True chuck Index plate having holes : 1stside 31, 27, 23, 21, 92ndside 30, 24, 20, 18, 16 For DRU Series change Gear bracket with 2 sleeves and set of 13 change gears 24(2), 28, 32, 36, 40, 44, 48, 56, 64, 72, 86, 100 Note : While ordering DRU or DRW series Dividing head please order it LEFT HAND TYPE (Dividing head monted at LEFT side of the machine standing infront of the machine) If required RIGHT HAND TYPE (Dividing head mounted at Right side of the operator)

We offer highly efficient Precision Milling Machine Vice in the marketplace. The Precision Milling Machine Vice offered by us is available with swivel base and without swivel base. They have the steel fabricated handle with squared punched bush that accurately slides and fits into the lead screw squared holder. The handle movement holder is tight fit with the handle plate & locked by CSK Allen Screw. Salient Futures : Closed grained seasonal castingJaw plates are of alloy steel & hardened ground. Right angled to the base is within +_0.015. Dove tail type of fitting to fix jaw base & sliding base fitted with wage. All Allen Screws & Grub Screws are metric & high tensiled quality used. Lead Screw of alloy steel box nu is of phosper bronze material used. Swivel Base Vice : Machine grooved main baseSeparately located wheel to allow free and smooth movement of bolt that secure the swivel base with viceAccurately calibrated anodized scale on the swivel base of vice to allow rotation of vice in 0o to 360o Range : Without Swivel Base100 mm Opening150 mm Opening200 mm OpeningWith Swivel Base100 mm Opening150 mm Opening200 mm Opening

We are one of the prominent manufacturers and suppliers of Coolant Pump. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltrmin. 1m - 2mapprox weight (kg)virak 0.1011200.10012034th" or 12th" bsp11536 - 309.7011700.10017034th" or 12th" bsp11536 - 3010.40virak 0.2522200.25022034th" or 12th" bsp11570 - 6314.75virak 0.5032200.5002201 " bsp160150 - 12025.75virak 1.0042701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice.

We are one of the prominent manufacturers and suppliers of coolant pumps. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440/415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltr/min. 1m - 2mapprox weight (kg)virak 0.101/1200.1001203/4th" or 1/2th" bsp11536 - 309.701/1700.1001703/4th" or 1/2th" bsp11536 - 3010.40virak 0.252/2200.2502203/4th" or 1/2th" bsp11570 - 6314.75virak 0.503/2200.5002201 " bsp160150 - 12025.75virak 1.004/2701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice. to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.

We are one of the prominent manufacturers and suppliers of Coolant Pump. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltrmin. 1m - 2mapprox weight (kg)virak 0.1011200.10012034th" or 12th" bsp11536 - 309.7011700.10017034th" or 12th" bsp11536 - 3010.40virak 0.2522200.25022034th" or 12th" bsp11570 - 6314.75virak 0.5032200.5002201 " bsp160150 - 12025.75virak 1.0042701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice.

We are one of the prominent manufacturers and suppliers of coolant pumps. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440/415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltr/min. 1m - 2mapprox weight (kg)virak 0.101/1200.1001203/4th" or 1/2th" bsp11536 - 309.701/1700.1001703/4th" or 1/2th" bsp11536 - 3010.40virak 0.252/2200.2502203/4th" or 1/2th" bsp11570 - 6314.75virak 0.503/2200.5002201 " bsp160150 - 12025.75virak 1.004/2701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice. to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.

We are one of the prominent manufacturers and suppliers of Coolant Pump. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltrmin. 1m - 2mapprox weight (kg)virak 0.1011200.10012034th" or 12th" bsp11536 - 309.7011700.10017034th" or 12th" bsp11536 - 3010.40virak 0.2522200.25022034th" or 12th" bsp11570 - 6314.75virak 0.5032200.5002201 " bsp160150 - 12025.75virak 1.0042701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice.

We are one of the prominent manufacturers and suppliers of coolant pumps. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440/415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltr/min. 1m - 2mapprox weight (kg)virak 0.101/1200.1001203/4th" or 1/2th" bsp11536 - 309.701/1700.1001703/4th" or 1/2th" bsp11536 - 3010.40virak 0.252/2200.2502203/4th" or 1/2th" bsp11570 - 6314.75virak 0.503/2200.5002201 " bsp160150 - 12025.75virak 1.004/2701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice. to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.

We are one of the prominent Manufacturers and Suppliers of Coolant Pumps. The Coolant Pumps are accessible in different range as per the requirements of the clients. Applications : Virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as Lathes, Milling, Drilling, Grinding, etc. Salient Features : Virak Cooling Pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 C.Virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.Dynamically well-balanced rotor thus giving good mechanical stabilityThe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.Pumps with 'B' class insulation motors are available on request. Specifications : Motor : 3-Ph, 440415 V, 50 Hz., 2880 R.P.M. Totally Enclosed type Squirrel Cage Induction motor Specifications SizeTypePower (h.p.)Immersion Depth (mm)Outlet ConnectionPCD to Mount the Pump (mm)Min. Capacity to pump water against a head of in ltrmin. 1m - 2mApprox weight (kg)Virak 0.1011200.10012034th" or 12th" BSP11536 - 309.7011700.10017034th" or 12th" BSP11536 - 3010.40Virak 0.2522200.25022034th" or 12th" BSP11570 - 6314.75Virak 0.5032200.5002201 " BSP160150 - 12025.75Virak 1.0042701.0002701 " BSP160280 - 24035.00 NOTE We also develop COOLANT PUMPS to suit your specificrequirements.Keeping up with the technological achievement all the specifications are subject to change without any prior notice.

We are one of the prominent manufacturers and suppliers of coolant pumps. the coolant pumps are accessible in different range as per the requirements of the clients. applications : virak pumps can be used for supply of coolants on working surface of light and heavy duty machine tools such as lathes, milling, drilling, grinding, etc. salient features : virak cooling pumps are vertical type of centrifugal pumps driven by a three-phase induction motor. These pumps are suitable for all coolants up to 150 centistokes and temperatures up to 60 c.virak pumps are provided with an oil seal to prevent the ingress of oil into the pump motor windings.dynamically well-balanced rotor thus giving good mechanical stabilitythe terminal box which is located on the opposite side of the pump outlet can be rotated through 90 or 180.pumps with 'b' class insulation motors are available on request. specifications : motor : 3-ph, 440/415 v, 50 hz., 2880 r.p.m. totally enclosed type squirrel cage induction motor specifications sizetypepower (h.p.)immersion depth (mm)outlet connectionpcd to mount the pump (mm)min. Capacity to pump water against a head of in ltr/min. 1m - 2mapprox weight (kg)virak 0.101/1200.1001203/4th" or 1/2th" bsp11536 - 309.701/1700.1001703/4th" or 1/2th" bsp11536 - 3010.40virak 0.252/2200.2502203/4th" or 1/2th" bsp11570 - 6314.75virak 0.503/2200.5002201 " bsp160150 - 12025.75virak 1.004/2701.0002701 " bsp160280 - 24035.00 note we also develop coolant pumps to suit your specificrequirements.keeping up with the technological achievement all the specifications are subject to change without any prior notice. to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.