Voltage Tester Dealers in Pune

Application It is used to pin-point underground cable faults in power transmission, distribution cable networks in acoustic mode with the help of suitable surge wave receiver. Key Features Pin-point location of cable faults in Low voltage cables by acoustic method. Output voltage selectable ranges 0-2kV, 4 kV continuously variable. High energy of 500 Joules (Optional 1000Joules). Full energy delivering capacity at each select range. Single Impulse and 2, 4 seconds intervals Sequence. Pre-location of cable fault distance with suitable pre-locator unit in ICM mode. Power Supply 230V AC + 10%, 50 Hz, Single phase. LT Network 1.1Kv.

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. We effortlessly dispatch the product basket to the clientele as we have excellent, wide connectivity and trusted shipping facilities.

• Open Circuit Voltage: 0to5KVOR0to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
• Precautions: Voltage on test terminals. High Voltage on test jig appears only after the variac is set to zero and gradually increased. There is a trip device to trip if the current increases than the required value
• Trip settings: The tripping can be reset by a pot which can be varied as peruse requirement
• Open Circuit Voltage: 0 to 30 KV OR 0 to 100 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 5 mAto 50 mA OR 10 mAto 100 mA
• Accuracy Of Reading: ±2%
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz
• Open Circuit Voltage: 0 to 5 KV or 0 to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
•  : Protection provided with zero start to prevent accident availability of High

• AC HV Tester: 5, 10, 80
• Model: ZMHVBT

Audio and Visual Alarm when HV ON and Off • Test ON and OFF Switch to start and Interrupt Test • Precise Trip Current Setting or Press to Set Switch for Leakage Current • Inbuilt timer with Selector Switch or variable by thumbwheel setting

• HV output: 0- 4-8-16 kV, 500 Joules
• Input: 230V, 50Hz
• Medium Network: 11kV
• Power Supply: 230V AC + 10%, 50 Hz, Single phase.
• Output Voltage: 4 kV, 8 kV, 16 kV
• High Energy: 1000 Joules At Each Range (Optional 2000j).

High Voltage Surge Tester (ST-16) is ideal for pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-16) is known for its portability and versatility. It is suitable to locate faults in all LT cables and HT cables up to 11 kV class. Attributes : Portable Mounted on castors Easy to carry and use on the field. Manual and auto operation of impulse discharge Capacity enhancement possible Built in Current coupler to facilitate prelocation

• Power Supply: 230V±10%, single phase, 50Hz

Voltage tester Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC. Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set urrent.

• Brand Name: Kewtech
• Dimension: 177(L) x 226(W) x 100(D) mm (Hard case 380(L) x 430(W) x 154(D) mm)
• Weight: 1.9kg approx
• Measuring Range: AC30 - 600V (50/60Hz) DC+/-30 - +/-600V
• Accuracy: +/-2%rdg+/-3dgt

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry̢۪s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

• Brand Name: SMEM
• Application: Laboratory, Industrial
• Model: SM-5PT

• AC High Voltage Breakdown Tester: 5, 10, 100
• Operating Power: 230V 50 Hz or 110V 60 Hz

Voltage tester, Audio & Visual Alarm when HV on & off. • Test ON & OFF switch to start & interrupt Test. • Precise Trip Current Setting or Press to set switch for Leakage Current. • Inbuilt timer with Selector switch or variable by thumbwheel setting. • DC High Voltage Tester is useful for measurement of Breakdown Voltage of transformers, Electrical & Electronics instruments, Motors, Components, Control Panels etc.

• Condition: NEW
• Feature: Automatic DCV, ACV, & Continuity Selection, High input impedance & Auto Hold, Auto Power Off

RR AC HIGH VOLTAGE BREAKDOWN TESTERS ARE SPECIALLY DESIGNED FOR TESTING DIELECTRIC PROPERTIES OF VARIOUS INDUSTRIAL APPLIANCES, PRODUCTS LIKE MOTORS, TRANSFORMERS, SWITCHGEARS,CABLES, INSULATING MATERIALS, SAFETY GLOVES – BOOTS, RUBER SHEETS, INSULATORS . THESE H.V. TESTERS ARE A MUST FOR THE WIRE & CABLE INDUSTRY, SWITCHGEAR MFG, POWER & DISTRIBUTION INDUSTRY, POWER PROJECTS, SUBSTATIONS AND ELECTRICITY BOARDS.

• Feature: Adjustable sensitivity, Visual and acoustic signal, Measuring point illuminatio

• Brand Name: Testo
• Usage: Industrial, Laboratory
• Operating Temprature: 0 to 40 Degree
• Minimum Order Quantity: 1 Piece

• Phase: Single Phase
• Power Source: Electric
• Frequency: 50 Hz
• Power: 5 kV
• Voltage: 230 V

Digital two pole voltage tester HT9 provides daily use features. In addition to DC / AC voltage measurement and  continuity test, HT9 also offers gas-filled lamp test and  phase sequence / conformity detection features. To overcome difficult pinpointing of the right cable within a frame on a switchboard under poor light conditions, a built-in white LED flashlight makes testing possible and easy even in dark environments. The slim and ergonomic design of HT9 is highly appreciated by contracting electricians, field professionals, troubleshooters as well as any kind of user. Designed according to the requirements of field professionals, HT9 is must-have troubleshooting tool.Function •  DC/AC voltage up to 690V•  AC voltage detector with 1 wire method•  Neon and fluorescent lamp test•  Sodium/mercury vapor lamp test•  Halogen lamp test•  Non-electronic ballast test•  Continuity test•  Phase sequence test•  Diode test•  LED and acoustic indications•  Built-in torch•  LCD display•  Safety: IEC/EN61010-1, IEC/EN61010-2-030, IEC/EN61243-3:2010•  Measurement category: CAT III 690V, CAT IV 600VStandards •  Protective cap for test leads, 2 pcs•  Adapter for 4mm test lead tip, 2 pcs•  Batteries•  User manual•  EMC 2004/108/CE Directive •  CE MARK •  IEC/EN 61010-1 •  IEC/EN61010-2-030 •  IEC/EN61243-3:2010 •  LVD 2006/95/CE Directive

Spark Tester, Custom Built Control Panels, breakdown tester

Battery Chargers, Ultra Isolation Transformers, Rectifiers

High Voltage Surge Tester, lapp cables, meter reading instrument

Programmable AC / DC High Voltage Breakdown Tester

Breakdown Voltage Tester, radio frequency lesion generator

AC Voltage Tester