Voltmeters Dealers in Pune

• Frequency: 50 Hz
• Phase: Single phase
• Output Voltage: 0-3 kV, 6 kV
• Power Supply: 230V AC + 10%

• Supply: 1 Phase 230 V AC, 50 Hz
• Cutout dimensions: 92 (W) X 92 (H) mm
• Over Voltage: Range-210V-270V, Default- 260V.
• Dimension: 96(W) X 96 (H) X 80(D) mm
• Display: 3 digit 0.5 7 sec LED
• Under Voltage: Range-170V-120V, Default- 170V.
• Over Load: Range-1.0A-999.9A, Default- 10.0A.
• Over Voltage Sense Delay: Range- 1 sec-60 sec, Default-2 sec.
• Under Voltage Sense Delay: Range- 1S-60S, Default-2S.
• Over Load Sense Delay: Range- 1 sec-60 sec, Default-2 sec.
• Resolution: 1V For Voltage 0.1 HZ for Frequency , 1A For current >=100& 0.1 A For current < 100.
• CT Ration: Settable 30A/5A to 999A /5A, Default- 50A/5A.

Our packing system is systematized in such a manner that we can handle even bulk packaging with ease. Moreover, our packing experts take care of the customized as well as standard packing demands of the clients. We have become a preferred choice of the patrons owing to our timeliness and client centric approach.

• Feature: Accuracy, Easy To Use
• Color: Back Cover: Black Front Cover: Smoke Grey
• Functions: Digital Voltmeter
• Measurement Type: True RMS Voltage
• Measuring Range: 12 to 500 VAC
• Mounting Type: Panel
• Connections: Terminal Connectors
• Display: 3 X 14.2mm, 7 Segment White Display
• Power Input: 240 VAC, ± 20%, 50/60 Hz
• Input Type: AC Voltage Input
• AC Voltage Input: 1 V
• Accuracy: ± 0.4% of Full Scale Over rated range
• Housing: Back Cover: ABS Plastic Front Cover: Polycarbonate

• Features: Longer service life , Optimum performance
• Item Code: TK-2020

• Phase: Single Phase
• Power Source: Electric
• Frequency: 50 Hz
• Power: 5 kV
• Voltage: 230 V

• Range: `Up to 6000 KW

Working Principle FCMA Frequency controlled Automatic Slip Regulator are based on frequency dependent resistance design which provide a constant low starting current with automatically reducing resistance in congruence with motor speed to provide constant torque characteristics & accelerate the motor Frequency Slip Regulator / Frequency Rotor Controller accelerates driven equipment from stand still to full speed smoothly without any jerks. The FCMA Rotor Starter & Slip Regulator is connected to the Rotor Terminals of the motor, so that the starting current is limited to a low value with a required starting torque. As the motor speed increases the resistance of FCMA reduces Steeplesly to keep the current & torque constant so that the load is accelerated.     Salient Features FCMA technology provides slip dependent automatic resistance variation. Provides constant current constant torque acceleration Starting torque and starting current adjustable from 100% - 250% depending upon load and motor characteristics. Built in RUN mode bypass contactor Virtually no maintenance. No moving parts Frequency Controlled Slip Regulator  Only FSR Starter / FSR Starter + Stator Panel  

• HV output: 0- 4-8-16 kV, 500 Joules
• Input: 230V, 50Hz
• Medium Network: 11kV
• Power Supply: 230V AC + 10%, 50 Hz, Single phase.
• Output Voltage: 4 kV, 8 kV, 16 kV
• High Energy: 1000 Joules At Each Range (Optional 2000j).

High Voltage Surge Tester (ST-16) is ideal for pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-16) is known for its portability and versatility. It is suitable to locate faults in all LT cables and HT cables up to 11 kV class. Attributes : Portable Mounted on castors Easy to carry and use on the field. Manual and auto operation of impulse discharge Capacity enhancement possible Built in Current coupler to facilitate prelocation

• Feature: Adjustable sensitivity, Visual and acoustic signal, Measuring point illuminatio

• Display Type: Digital
• Frequency: 50 - 60 Hz
• Material: Plastic
• Phase: Single Phase
• Power Source: Electric
• Packaging Type: Box  

• Power Supply: 230V±10%, single phase, 50Hz

Voltage tester Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC. Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set urrent.

Our voltage Regulator is Specifically Designed and Developed to Fulfill the Requirements of Our Clients Across India. the Products are Extremely Useful for Automatically Maintain a Constant Voltage or Electrical Level. Our Voltage Regulator is Available At a Reasonable Market Price for Our Customers. We Obtain Our Voltage Regulator from Reliable Sources to Provide Tension Free and Efficient Solution for Our Clients.

• AC High Voltage Breakdown Tester: 5, 10, 100
• Operating Power: 230V 50 Hz or 110V 60 Hz

Voltage tester, Audio & Visual Alarm when HV on & off. • Test ON & OFF switch to start & interrupt Test. • Precise Trip Current Setting or Press to set switch for Leakage Current. • Inbuilt timer with Selector switch or variable by thumbwheel setting. • DC High Voltage Tester is useful for measurement of Breakdown Voltage of transformers, Electrical & Electronics instruments, Motors, Components, Control Panels etc.

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry̢۪s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

Pen Phase Sequence Indicator and Conformity TestThe HT70 pen voltage detector permits both to quickly verify the presence of AC voltage on any type of electrical installation (sockets, cables, fuses, switchboards, etc.) with and without direct contact and also to perform phase sequence indication and conformity test on generic three phase plants by using red and green fixed and blinking LED indications. HT70 is designed according to IEC/EN61010-1 safety standard in CAT IV 1000VFunction • Detection AC voltage from 100V to 1000V to ground• Phase sequence and conformity test with 1 wire method• Working frequency: 50/60Hz• With a without contact measurements• LED red and buzzer indication• Practical pen clip• Safety: IEC/EN61010-1, CAT IV 1000VStandard• Batteries• User manual• EMC 2004/108/CE Directive• CE MARK• LVD 2006/95/CE Directive

• Brand Name: CDIL
• Colour: Black
• Minimum Order Quantity: 1000 Piece
• Regulator Type: Linear Regulator

• High Spike proteciton: Over Current Protection
• Driven by Potentiometer: Operated by 0-10V Analog
• Adustable Set Point for Current limit: Soft Starter
• Provision of Proximity Sensors: Short Circuit Protection
• Built in Delay TImers: ON-OFF delay

We are offering voltage regulator. Vibratory controller ( voltage regultor ) is mainly used in bowl feeder system and linear feeder system.

• Type: Voltage Regulators
• Material: Aluminium, Brass, Fiberglass, Frp, Glass, Plastic, Porcelain
• Certification: CE Certified, CQC Certified, IAF Certified, ISI Certified
• Color: Creamy, Golden, Green, Light Green, Metallic, Off White, Shiny Silver, Silver, Sky Blue, Yellow
• Condition: New, Old
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Automatic Grade: Manual, Semi Automatic
• Feature: Accurate Reading, High Performance, Lightweight Specifications, Longer Service Life, Robust Construction, Rust Proof, Shocked Proof
• Current Type: AC
• Puncture Voltage: 0-50KW, 100-200KW, 200-400KW, 400-800KW, 50-100KW
• Electricity Volume: 1, 2, 3, 4, 5

• AC HV Tester: 5, 10, 80
• Model: ZMHVBT

Audio and Visual Alarm when HV ON and Off • Test ON and OFF Switch to start and Interrupt Test • Precise Trip Current Setting or Press to Set Switch for Leakage Current • Inbuilt timer with Selector Switch or variable by thumbwheel setting

We are engaged in manufacturing and supplying a wide range of Automatic Voltage Regulator, which is known for its sturdy construction and compact size. These ensure no breakage in supply during correction and provide full proof protection from spike surge. The features are : • Rugged design • Very fast correction • Compact size • No break in supply during correction • Protects from spikessurge

• Brand Name: Testo
• Usage: Industrial, Laboratory
• Operating Temprature: 0 to 40 Degree
• Minimum Order Quantity: 1 Piece

• Warranty: 1 Year
• Model Number: KM 500HP
• Voltage: 500KV
• Weight: 500 grams
• Battery Type: AAA

• Phase: Three Phase
• Application: Industrial, Laboratory
• Size: 96 x 96 mm
• Model: AVM-31
• Input: Three Phase
• Supply: 24 V DC/110 AC/230V AC

• Open Circuit Voltage: 0to5KVOR0to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
• Precautions: Voltage on test terminals. High Voltage on test jig appears only after the variac is set to zero and gradually increased. There is a trip device to trip if the current increases than the required value
• Trip settings: The tripping can be reset by a pot which can be varied as peruse requirement
• Open Circuit Voltage: 0 to 30 KV OR 0 to 100 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 5 mAto 50 mA OR 10 mAto 100 mA
• Accuracy Of Reading: ±2%
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz
• Open Circuit Voltage: 0 to 5 KV or 0 to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
•  : Protection provided with zero start to prevent accident availability of High

• Brand Name: SMEM
• Application: Laboratory, Industrial
• Model: SM-5PT

• Display Type: analog
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: Rishabh
• Voltage: 500V
• Size: 96x96mm
• Phase: 1ph

• Auxiliary Power: 20 to 60 DC, 50 HZ
• Voltage: 0.1 V
• Input voltage: 0.25% ± 1 dgts.

Analog voltmeters are generally galvanometers connected in series with a high-resistance resistor. They have a coiled spring that moves a needle in response to a magnetic field. The needle is next to a graduated scale, allowing the user to take a reading of the current. Such meters are generally less precise than those using improved technology and digital readouts.

• Brand Name: Kewtech
• Dimension: 177(L) x 226(W) x 100(D) mm (Hard case 380(L) x 430(W) x 154(D) mm)
• Weight: 1.9kg approx
• Measuring Range: AC30 - 600V (50/60Hz) DC+/-30 - +/-600V
• Accuracy: +/-2%rdg+/-3dgt