Wastewater Treatment Equipment Dealers in Pune

• Brand Name: Scale Aqua
• Application: Heat Exchanger & Condenser
• Features: Non Chemical, No Power , Inline Unique
• Usages: To Eliminate Scaling
• Industry Type: Plastic Industry, Ice Factories, Cold Storages, Milk Dairies Etc.

Scaling:  Scaling occurs when a mineral film coats the entire heat transfer surface of Heat exchanger OR Condenser.   These mineral deposits such as Calcium, lime, Mud and rust rob heat transfer efficiency. This increases energy cost by over 30 %.   Heat Exchangers, Condensers and even Cooling Towers therefore require DESCALING maintenance to improve their efficiency. Evaporative Condenser: When water scale is deposited on the heat transfer surface of an evaporative Condenser, the cooling water from the spray head can not efficiently condense the refrigerant gas in the coils.  As a result inadequate cooling , over worked machinery and expensive operation is incurred.   Shell & Tube Condensers: Water scale deposits in the condenser coils cause the compressor to kick out on high head pressure and lowers the cooling capacity of the unit.   Cooling Towers: Basic principle of Cooling Tower is to cool the water that has picked up heat generated by equipment within facility.  Cooling tower design enhances evaporation & allows further cooling of tower water. This water is then pumped into the facility continuing to cool the equipment Scaling within cooling tower can restrict the water distribution of spray nozzles, reduce the water flow thru the openings of a hot deck and restrict the air flow within the tower. All these conditions result in diminished cooling capacity & inefficient operation of the associated equipment in the cooling tower system.   Absorption Units: Water scale accumulating on the water side of Absorbers & Condensers materially affects the operation and efficiency of any absorber type Air-conditioning unit. The harder the water, the faster the deposit accumulates.   Scaling of Plastic Molding  Machines : Cooling is an important process in the production of injection  mold To molders, scale, caused by calcium in hard water, is a devil that forms as    Water flows through pipes, contaminating and clogging lines throughout a plant. When scale builds up in the pipes and heat exchangers on a molding machine’s hydraulic system, it causes poor heat transfer, which prevents molders from running their machines at full capacity. Similarly, when scale clogs mold cooling water passages , it creates a thermal barrier that hinders the cooling and heating of the mold. All of this adds up to wasted machine time and money. Injection molding machines are typically run at about 65 to 75 percent of their fastest cycle times because of poor heat transfer. It takes just a 1/16-inch-thick build up of scale to cause a 15 percent slowdown in a machine’s cycle because it takes longer to extract the heat. A uniform cooling process is desired to avoid defects in manufactured parts.   How to Get Rid of Scaling : Scale can not be removed by hydro blasting or typical scrubbing. The only reliable way to remove these scales is by   Descaling Agent . A Descaling agent or chemical descaler is a chemical substance used to remove limescale from metal surfaces in contact with hot water, such as in boilers, water heaters, and kettles. Descaling agents are typically acidic compounds such as hydrochloric acid that react with the alkaline carbonate compounds present in the scale, producing carbon dioxide gas and a soluble salt.  Notable Descaling agents include acetic acid, citric acid, glycolic acid, formic acid, phosphoric acid, sulfamic acid and hydrochloric acid. Descaling process needs to be done frequently Chemicals are used. So additional expenditure. Plant shut down is required resulting in loss of production. Softening plant is required. Costly man power required. All this can be eliminated by using SCALE-AQUA , a unique online non chemical No power Descaling equipment.   Advantages of Scale Aqua Installation : SCALE-AQUA, prevents deposition of hard scale in the heat transfer area. SCALE-AQUA, is fitted in existing pipeline with absolutely no changes in the pipeline. SCALE-AQUA is tested at water hardness of 5,000 PPM & TDS of 20,000 PPM  SCALE-AQUA, gives excellent water saving. SCALE-AQUA is an online equipment which is fitted just before evaporative condensers, Heat Exchanger (PHE) , and Boiler, coil, Compressors, Chilling plants.

We manufacture & supply all categories of DM plant, Ozonation, filter press, Centrifugal decanter, sludge dewatering systems available. As per requirement we also supply tailor-made solutions to our clients.

We are care chem enterprises dealing in lab- materials,api's chemicals,reagents, solvents, indicators, glass wares, plastic wares porcelain wares and laboratory scientific equipment and setup of all laboratories with good quality materials at minimum possible price. we also deal with operation theater setup, aseptic room make up and maintenance and clean room with cabinet (air blower) aseptic garment racks. we believe in good quality product supply with minimum lower possible cost. it will be our pleasure. If we could help you to provide maximum product service with best quality at minimum cost we will fill proud if you order us for better surveillance of your best institute industry. assuring you of our continued commitment to provide quality products and services and our desire to contribute significantly towards success of your plans and activities, we remain.

The product range, which extends from pressure regulators up to air dryers and multi circuit protection valves, contributes to the functional safety of pneumatic systems. Additionally, we offer the Air Processing Unit (APU), which combines all the functions of an air dryer and a multi circuit protection valve in one device. APU´s are available as a flanged solution or as an extremely compact monobloc version for reduced installation space. The compressed air produced by the compressor must be dried and cleaned before being distributed to up to seven different brake and subsidiary circuits. These circuits must be filled with up to three different pressure levels and secured against each other in order to fulfill reliably the highest safety demands in traffic.

Our enterprise is a prominent manufacturer, trader and supplier of superior quality water softener. These softeners are manufactured under the supervision of our adept professionals by utilizing optimum quality basic material and modern technology at our highly equipped production unit. Our offered products find their wide application in various industries. These products are tested by quality checkers on various parameters in order to assure that they are best in quality and performance 1. pre chlorination the raw water will be chlorinated disinfected by means of dosing sodium hypochlorite to prevent future infection 2. Dual media filter the raw water is first passed through a dual media filter to reduce the suspended solids and organic matter present in the raw water. Dual media filter bed consists of carbon and sand media. The filter will have to be washed with the help of raw water for 10 to 15 mins daily. This filter is provided to keep a check on the suspended solids. 3. Softening the filtered water from the filtered water tank will be fed to the one bed softener. the one bed softener consists of a cation exchanger unit. In the strong acid cation exchange na-type the resin bed is regenerated with nacl. The ca++ and mg++ ions present in the water are exchanged with na+ ions available in the resin and water is softened

• Automation Grade: Automatic
• Material: Die-Cast Aluminum
• Feed Flow Rate: 50 m3/day
• Finishing: Painted,Powder Coated
• Insulation Type: Double Insulation

• Equipment: Activated Carbon Filters Anion Exchangers Cation Exchangers Mixed Bed Exchangers
• Project: Rabiq Refinery
• Customer: Aquatech System Asia (Pvt.) Ltd.
• Epc / Tpia: Mitsubishi Heavy Industries, Japan
• Total Vessels Supplied: 16 NOS.

Years of expertise and skills have enabled the company to reach new heights of success in the markets of Gas Storage. We have been catering to the demands of storage of gases in varied industries for different applications. Our collection of Gas Storage Vessels is designed from high grade stainless steel, carbon steel, low-alloy steel, and non-ferrous metals to ensure high durability, efficacy and performance. To fulfill the exact needs of the patrons, we have been offering the collection in high pressure, medium-pressure and low pressure. The temperature of the vessel is also available from low-temperature heat exchanger, medium-temperature heat exchanger to high-temperature heat exchanger. With sturdy designs and performance, the range is ideally suited to store non-flammable, non-corrosive, non-toxic medium, etc. Moreover, the collection is also suitable to store flammable, corrosive, toxic as well as highly toxic products that make it highly useful in petrochemical, coal, nuclear power, metallurgical, machinery, food, pharmaceutical, pesticide, and other sectors.

Water Treatment Equipments is a prominent company involved in manufacturing and supplying a wide range of precisely engineered water and waste water treatment equipments & systems. We are well¬ equipped with all latest manufacturing machinery in our integrated manufacturing plant to meet clients demand and worlds class standards, deliveries with ever-increasing demand with best service backup.

Sas filtration is engaged in offering a wide range of water treatment equipment in india.

Waste Water Treatment Equipment, Water Treatment Plants

Water Treatment, wastewater treatment services, Moving Bed Biofilm Reactor

Water Treatment Equipment, ion exchange plant, Effluent Treatment Plant

Water Treatment Equipment, Ph Tester, Desiccator vacuum, Tds Tester

Water Treatment Equipment, Stainless Steel Vessel

Water Treatment, Water Purification, Water Softening Equipment

Water Treatment Equipment, Food Waste Composting machine Maintenance

Water Treatment Equipment, Wastewater Treatment Equipment

water treatment equipments, ultra violet systems, Water Treatment Plants

water treatment equipments