Wastewater Treatment Plant Dealers in Pashan, Pune

• Brand Name: Scale Aqua
• Application: Heat Exchanger & Condenser
• Features: Non Chemical, No Power , Inline Unique
• Usages: To Eliminate Scaling
• Industry Type: Plastic Industry, Ice Factories, Cold Storages, Milk Dairies Etc.

Scaling:  Scaling occurs when a mineral film coats the entire heat transfer surface of Heat exchanger OR Condenser.   These mineral deposits such as Calcium, lime, Mud and rust rob heat transfer efficiency. This increases energy cost by over 30 %.   Heat Exchangers, Condensers and even Cooling Towers therefore require DESCALING maintenance to improve their efficiency. Evaporative Condenser: When water scale is deposited on the heat transfer surface of an evaporative Condenser, the cooling water from the spray head can not efficiently condense the refrigerant gas in the coils.  As a result inadequate cooling , over worked machinery and expensive operation is incurred.   Shell & Tube Condensers: Water scale deposits in the condenser coils cause the compressor to kick out on high head pressure and lowers the cooling capacity of the unit.   Cooling Towers: Basic principle of Cooling Tower is to cool the water that has picked up heat generated by equipment within facility.  Cooling tower design enhances evaporation & allows further cooling of tower water. This water is then pumped into the facility continuing to cool the equipment Scaling within cooling tower can restrict the water distribution of spray nozzles, reduce the water flow thru the openings of a hot deck and restrict the air flow within the tower. All these conditions result in diminished cooling capacity & inefficient operation of the associated equipment in the cooling tower system.   Absorption Units: Water scale accumulating on the water side of Absorbers & Condensers materially affects the operation and efficiency of any absorber type Air-conditioning unit. The harder the water, the faster the deposit accumulates.   Scaling of Plastic Molding  Machines : Cooling is an important process in the production of injection  mold To molders, scale, caused by calcium in hard water, is a devil that forms as    Water flows through pipes, contaminating and clogging lines throughout a plant. When scale builds up in the pipes and heat exchangers on a molding machine’s hydraulic system, it causes poor heat transfer, which prevents molders from running their machines at full capacity. Similarly, when scale clogs mold cooling water passages , it creates a thermal barrier that hinders the cooling and heating of the mold. All of this adds up to wasted machine time and money. Injection molding machines are typically run at about 65 to 75 percent of their fastest cycle times because of poor heat transfer. It takes just a 1/16-inch-thick build up of scale to cause a 15 percent slowdown in a machine’s cycle because it takes longer to extract the heat. A uniform cooling process is desired to avoid defects in manufactured parts.   How to Get Rid of Scaling : Scale can not be removed by hydro blasting or typical scrubbing. The only reliable way to remove these scales is by   Descaling Agent . A Descaling agent or chemical descaler is a chemical substance used to remove limescale from metal surfaces in contact with hot water, such as in boilers, water heaters, and kettles. Descaling agents are typically acidic compounds such as hydrochloric acid that react with the alkaline carbonate compounds present in the scale, producing carbon dioxide gas and a soluble salt.  Notable Descaling agents include acetic acid, citric acid, glycolic acid, formic acid, phosphoric acid, sulfamic acid and hydrochloric acid. Descaling process needs to be done frequently Chemicals are used. So additional expenditure. Plant shut down is required resulting in loss of production. Softening plant is required. Costly man power required. All this can be eliminated by using SCALE-AQUA , a unique online non chemical No power Descaling equipment.   Advantages of Scale Aqua Installation : SCALE-AQUA, prevents deposition of hard scale in the heat transfer area. SCALE-AQUA, is fitted in existing pipeline with absolutely no changes in the pipeline. SCALE-AQUA is tested at water hardness of 5,000 PPM & TDS of 20,000 PPM  SCALE-AQUA, gives excellent water saving. SCALE-AQUA is an online equipment which is fitted just before evaporative condensers, Heat Exchanger (PHE) , and Boiler, coil, Compressors, Chilling plants.

• Voltage: 320-350 V
• Usage/Application: Industrial
• Inlet Water Quality: Waste Water
• Capacity Inlet Flow Rate: 500-1000 m3/hour
• Feed Flow Rate (cubic-meter/day): 100 m3/day
• Automation Grade: Automatic
• Water Source: Commercial Waste Water, Borewell Water
• Industry: Pharmaceutical Industry
• Water Pump Power: 1-3 kW
• Air Blower Power: 1.5 kW
• Phase: Three Phase
• Frequency: 50-60 Hz

There are many reasons why we must move forward with the wastewater project for the core area, not only to meet the federal regulations and provincial requirements. Managing wastewater is more than just selecting the technology; it also involves testing and knowing what is in the wastewater. Treatment is part of the solution to manage impacts from the waste we produce, but we can also help by being more diligent in the personal-care and products we use. Wastewater treatment is a continuum and it must be built to provide flexibility for the future as regulations or needs change. We at COEP understand this need of waste water treatment in Industry today and offer a wide range of steel tanks for storage of high volumes of waste and treated water. Our water tanks ranges from 10,000 litres up to 20 lakh litres and can be used to store waste water, intermediate water and treated water.   Used by the food, pharma, textile,engineering,mining and processing industries COEP Tanks are designed to suit project requirements and a highly cost effective solutions can be found. COEP Prefab tanks have wide range and are suited to the requirement without compromising on quality, longevity or safety.  

• Automation Grade: Automatic
• Material: Die-Cast Aluminum
• Feed Flow Rate: 50 m3/day
• Finishing: Painted,Powder Coated
• Insulation Type: Double Insulation

We Offer Waste Water Treatment Plant. Cmplete solution for industrial wastewater treatment plant by providing following technologies 1. Screening 2. Removal of O&G 3. Removal of TSS 4. Physico-chemical treatment processes 5. Advance Ananerobic and Aerobic biological treatment solutions including MBBR, MBR, SBR etc. 6. Zero Liquid Discharge solutions by providing Multi Effect Evaporation System with Crystelizers. 7. Membrane Based solutions like UF, RO, Nano etc.

Wastewater Treatment Plants, Reverse Osmosis Plants, Water Treatment Plants

Waste Water Treatment Equipment, Water Treatment Plants

Water and Wastewater Treatment, Marketing diagnostics service

petroleum waste water treatment plant, Effluent Water Treatment System

Water Treatment Equipment

water treatment plant equipment, Automotive Tyres, Demineralization Plants

Water Treatment Equipment

Waste Water Treatment Plant, brewery plant, Boiler

Waste Water Treatment Plant, Food Processing Equipment

water treatment equipments, Gym Equipments, Swimming Pool Accessories

Water Treatment Equipment, Membrane Bioreactor, dm plant repairing services

Water Treatment, refinery, Pharmaceuticals Chemicals, Pesticides, Oil, gas

Water Treatment Equipment