Water Purification Plants Dealers in Narhe, Pune

• Brand Name: ELCARE
• Model Number: 11
• Weight: 2
• Place of Origin: PUNE

Application: ro plant models: 11 13 33 warranty: 1 year features:level control pressure control dry run protection overload protection automatic operation auto flush system display faultspump voltagecurrentsoperating hours.

Water treatment plants for Industrial & domestic applicationClarifies, filters & softeners. D. M. Plant. Reverse osmosis plants. Taste kit for water analysis. Chemical dosing system & pump. Resins, Chemicals, spares of systems. Automation & renovation of systems.

• Type: Ro Water Purifier
• Application: Water Purifying

Available At Best Price

We provide Automation solutions on turnkey basis. Our areas of expertise are - Preparatory, Solvent Extraction & Meal cooler, Neutralization, Bleacher & Deodorization, Dry-fractionation, Crystalization - Filter press, Hydrogenation unit, Tank farm and Utility. We have commissioned different types of edible oil manufacturing processes for Soybean, Palm, Sunflower, Vanaspati, Rise Bran, Mustard, Groundnut etc.

We design and fabricate superior Desalination Reverse Osmosis Systems. Our Desalination R.O. System is based on a separation process. The Desalination Reverse Osmosis Systems of our company effectively reduces dissolved salt content of saline water. In our Desalination Reverse Osmosis System, the saline feed water is separated by desalination process into two output streams, namely, low-salinity product water and very saline concentrate streams. The product water has that has less than 500 mg1 dissolved solids.

• Brand Name: Apram
• Material: SS,FRP
• Voltage: 220 V
• Frequency: 50 Hz
• Capacity: 3 t/H
• Salt Rejection Rate: 99.5%

• Type: Water Purifier
• Application: Water Purifying
• Certification: ISO 9001:2008
• Color: Blue, Brown, Green, Grey, Light White, Red, White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Semi Automatic
• Driven Type: Electric
• Warranty: 1year, 2years

• Voltage: 110-220 V/50-60 Hz
• Inlet Flow Rate (cubic meter/hour): 2000, 100, 500, 1000
• Automatic Grade: Fully Automatic, Manual
• Applicable Industry: Hospital, Pharmaceutical, Chemical/Petroleum, Automobile, Slaughter House
• Application: Waste Water Treatment, Sewage Treatment, Effluent Treatment
• Condition: New
• Ozone output: 50 G/h
• Power consumption: 530 watt
• Water Source: Industrial Effluent, Municipal Sewage, Borewell Water, River Water, Commercial Waste Water, Industrial Wastewater

We Hold Expertise in Offering R.o. with Mix Bed, Which is Used Polishing the De-mineralized Water Produced in An Automatic Tank Plant or At Reverse Osmosis Plant. this R.o with Mix Bed is Widely Appreciated By Our Customers for Excellent Purification of Water By Reverse Osmosis Process. this is Manufactured Using Supreme Quality Raw Material and is Widely Used in Several Small Scales to Large Scale Industries. this R.o with Mix Bed is Highly Effective as They Help in Eliminating Pathogens and Reduce the Total Dissolved Solids. Moreover, Our System is Available with a Pretreatment Filtration Process, Which Helps in Reducing Suspended Solids and Eliminating Odor, Taste and Color.

OIL FILTRATION PLANTS CAN BE SUCCESSFULLY MODIFIED & AUTOMATED FOR VARIABLE FLOW RATE. A brief description is given for your reference.   INLET & OUTLET PUMPS : The pump will be driven by suitable sized AC drive to control the flow rate. By using these settings we can control the flow rate from i.e. If Plant is 6000 LPH then it will vary from 1000 LPH to 6000 LPH. HEATER TANK : It is also necessary to select proper heat output for variable flow rates. This will avoid localized heating of oil for small flow rates.This section will incorporate PLC which will control the heaters.PLC will be used for control of heater groups, once certain flow rate has been selected, heaters will be configured automatically to suit that flow rate. This control panel will be designed for reliable & trouble free operation.By using the above system the major benefit is to have a single machine instead of different models for different capacities. In this case, flow rate can be kept variable from 1000 LPH to 6000 LPH. Power saving of 30% can be achievable by using this system as compared with traditional oil filter system designs.   OPERATIONAL & PROCESS AUTOMATION Press 'START' to start the oil filtration process. All airing valves, oil inlet & outlet valve will close. The rotary vacuum pump will start to achieve coarse vacuum. After achieving coarse vacuum level, which the 'Vacuum Switch' will sense. After achieve the desired level of fine vacuum in the plant, oil inlet valve & intermediate valve will open and the oil inflow will start due to vacuum inside the plant. The flow switch provided in the suction line of the plant will sense the oil flow & that signal will start the oil inlet pump. In case, the incoming oil flow is not there, HMI on the control panel will display 'LOSS OF OIL', with annunciation. One pressure release valve, provided across the inlet pump will control the excessive pressure rise in the plant. As oil is filled in the degassing chamber, the high level float switch will operate & that will put 'OFF' the inlet pump & start the outlet pump. The starting signal to the outlet pump will open the outlet valve. As the oil level in the degassing chamber comes down, the high level float switch will start the inlet pump, again. Thus the oil circulation through the filtration plant will start. After the continuous oil flow through the plant, the heaters will be 'ON'. Temperature of oil will be controlled by TIC (Temperature Indicating Controller) & one safety thermostat will control the accidental temperature rise. Thus the hot oil circulation through filters & degassing chamber will start resulting in the effective separation of solid impurities as well as dissolved moisture & gases from the oil. During the filtration process, the necessary interlocks provided will avoid malfunctioning of the plant, like   1. High level float switch will stop the inlet pump, to avoid flooding of the degassing chamber. 2. Unless the inlet pump is 'ON' the heaters will not be energized. 3. Low level float switch will stop the outlet pump to avoid dry running of the pump During the filtration process, the moisture meter, installed in the inlet line, will display the moisture content in PPM, continuously, on it's indicator, on the control panel. Once the desired PPM (moisture) content is achieved, the moisture meter installed in the inlet line, will shut down the plant, automatically. This plant will also run with Manual Interference means with Manual Operation.

• Type: Ion Exchange Plant
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 1000-5000 kG , 5000-10000 kG
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V, 480V, 580V,600V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1yrs, 2yrs

Every swimming pool needs an efficient Filtration Plant, Filter Systems, Accessories & Equipment to keep the pool crystal clear and hygienic swimming pool water.We are leading manufacturer, importer and supplier of wide range of swimming pool filtration plant, filter systems, swimming pool accessories and equipment which include Sand Filter, Cartridge Filter, Pool pumps, Pool Skimmers, Pool Shell Equipment, Overflow Grating of different sizes and Color Shades etc. SWIMMING POOL FILTRATION PLANT & FILTER SYSTEMS The hygiene of pool water is the main concern of a pool owner and its users. Since many skin diseases can be contacted through the water it is ensured that regular filtration takes place by the filter systems. Comprehending the same requirement, we have in store for our clients a wide range of swimming pool filter systems, which are extremely instrumental in maintaining the hygiene and sanitation of the pool water. The distinguishing features of our range of swimming pool filters are as follows: Low maintenance Ideal filtration rate Low media migration Simple usage We are versed in all aspects of modern filtration vessels, matching them perfectly for the job required, within the design constraints of the plant room, and ensuring that the facility can still be operated in the event of planned maintenance or an unforeseen breakdown, with the plant operating at reduced capacity. Chemical control equipment is tested in our own workshops before being transferred to site to ensure a smooth, trouble-free installation without delays. We offer a range of monitoring options for our systems including remote on-site, remote off-site. A good filtration plant is necessary complement to every pool. Pool filter systems is used for capturing the coarse impurities in the water and its running helps to keep the water clean, and also extend the life of the pool.

Water ionizer machine, Ro Water Purifier Cabinets, Industrial RO Water Filter

Global Aqua is one of the top DM plant manufacturers in pune. When the dissolved solids in the water are to be removed, Demineralisation is used many times. The DM plant essentially must have minimum two resin columns, Cation and Anion. The cation unit contains resins, which are in H form and Anion resins in service cycle are in OH form.

Reverse Osmosis Plant, modular sewage treatment plant

Demineralised Water Plant, Water Treatment Plants, Activated Carbon Filters

Water Filtration Plants, Biogas Plants, Demineralization Plants

R O Water Purifier