Welding Wires Dealers in Chakan, Pune

• Thickness: 0.8-5mm
• Packaging Type: Roll,Carton
• Tensile Strength: 610MPa
• Current Ratting: 250-300A
• Usage/Application: Welding
• Wire Material: Copper/Copper Alloy
• Brand: Hyundai
• Quantity Per Roll: 5,15Kg
• Voltage: 26-29V
• Carbon: 0.027%
• Silicon: 0.79%
• Manganese: 1.96%
• Chromium: 20.78%
• Nickel%: 10.02%
• Speed: 30cm/min

Our super deluxe quality rosin cored/ no clean flux/ urea core solder wire. impurities : the maximum impurity levels will be as below : antimony : 0.2% copper : 0.1% arsenic : 0.05% iron : 0.02% aluminum : 0.001% zinc : 0.005% cadmium : 0.005% others : 0.08% flux : (confined to mil- f -14256f standard) the core flux will be of mildly activated and non-corrosive type. Water white grade rosin shall contain an activating agent evenly distributed there in. The activator shall not contain more than 0.05 % by mass of halogen, calculated as chlorine. The activating agents will be of organic type. The flux shall be homogenous and uniformly distributed throughout the tudinal axis of wire. Flux percentage: (rosin flux) the mass of rosin flux in the core of solder wire, commonly termed as flux percentage shall be 1.9 to 3 percent of total mass flux core solder wire. If flux percent specified by customer it will be maintained within ± 0.2% tolerance. (no clean flux):- if no clean flux core is a no clean formulation therefore the residues do not need to be removed. Typically using in pcb assemblies, electronic componets assemblies. Flux percentage shall be 1.00 to 2.00 percent of total mass flux core solder wire.if flux percent specified by customer it will be maintained within ± 0.2% tolerance. (urea flux core) urea cored solder wire will be manufactured from virgin quality non-ferrous metal alloys. Urea will be of c.p. Grade type. The application of this solder wire is used in vast industries like various types capacitor manufacturers. The speciality of urea flux is that it does not contaminate oil of capacitors and does not affect its electrical parameters

Khosla ureaamino fluxcore solder wires are filled with special urea amino based flux with acid formulation available in 10 to 18 swg. These special solders do not contaminate capacitor oil and offer high speed joints with high spread on capacitor elements.

• Thickness: 0.8 mm
• Wire Material: MS
• Brand: Esab
• Quantity Per Roll: 5 kg, 10 kg
• Packaging: Layer Wound Plastic/ Metallic Spool, Wooden Reels, Drums
• Finish: Bright & Matt Finish

MIG Wire, mig filler wires, Saw Wire, tig wire, Welding Electrodes

CO2 Welding Wire, Copper Coated Steel Wire, Mild Steel Galvanized Wire

Co2 Mig Wires, Stainless Steel Mig Wires

Co2 Welding Wires, co2 welding electrode

Welding Wire

Aluminium Welding Wire

Carbon Dioxide Welding Wire, Grinding Wheel, Springs, Steel Wire

Welding Wire, MIG / MAG Welding Machine, Regulated Welding Machine

Flux Cored Wire, Filler Wire, Welding Accessories, Welding Rods

Co2 Mig Wire, Electrical Items, Fasteners, Hardware Items, Hex Nuts