Wire Machinery Dealers in Pune

• Voltage: 440-420
• Production Capacity: 150 - 160 Kg per Hour
• Automation Grade: Fully Automatic
• Brand: Prakash Fabrication Work
• Power Consumption: 20 Hp
• Frequency: 50/60 Hz
• Material: MS and SS
• Made in: India

• Type: Automatic Wire Stripping Machine
• Certification: Customised
• Weight: 100-500kg
• Color: Red Black
• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warrenty: Not Available
• Country of Origin: India
• Brand Name: KOB 918
• Application: PVC Wire Stripping
• Capacity: 2200 Kgs/Shift
• After-Sales Service Provided: Yes
• Certification: Not Available
• Usage: PVC Cable Stripping

Wire Striping Machine Highly portable units for the precise stripping of discrete wires and small multi-conductor cables.

• Max. cutting speed: 60 mm2/ min on Steel (HCHCr / WPS)

Lowest running costs Closed loop X, Y with linear scales Reciprocating Brass Molydenum wire Max. cutting speed : 60 mm2 min on Steel (HCHCr WPS) 120 mm2 min on Aluminium Surface finish : 1.2 ~ 1.5 µ Ra (with multi-pass) Taper : ± 3° 100 mm Inbuilt 2 axes DRO

• Country of Origin: India
• Color: Grey
• Automatic Grade: Semi Automatic
• Type: Wire Heater Machine
• Condition: New
• Brand Name: KEJETHERM

Heating Elements 15 Kva For Annealing With Water Sprinkles To Form In Various Shapes And Coils.

• Color: Blue
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year
• Type: Wire Striping Machine
• Application: Industrial
• Weight: 100-200kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Wire Stripping Machine: ASW-KF

• Automation Grade: Automatic
• Production Capacity: 1.5 mt / day

• Voltage: 380-440 V
• Material: MS
• Power Source: Electric
• Phase: Three Phase
• Frequency: 50-60 Hz
• Operating Mode: Automatic

• Certification: ISO 9001:2008
• Voltage: 220V / 50 Hz
• Type: Wire Cutting Machine
• Compressed Air Connection: 5 to 7 bar, 70 to 100 psi, 100 Ipm
• Max. Outer Diameter: 4 mm
• Wire Cross Section: 0.2 to 1.5 mm
• Accuracy: +/- 0.2%

features: machine for 2 wires at a time, of upto1.5 mm2 high speed machine upto 2 mid-marking (for middle strippings) possible machine and controls in a single housing salient feature:- machine controlled with plc. touch panel display having easy to use graphic interface fully automatic machine. The setting is completely digitized and mostly automatic. machines for both side stripping. (can also do single side stripping and also only cutting). "microprocessor controlled machines with the smart display. fully automatic machine. The setting is completely digitized and mostly automatic. compressor not required, silent operation.

Manufacturing Solutions Delivered: Switchgear, Electrical, Automotive, Hardware, Appliance Parts, Automation Integration & Assembly, Manufacturing of Special Parts.

Electropneumatics offers an extensive range of bending machines and solutions for tubes, sections, wires and rods. Simple models for batch production in job shops and sophisticated CNC models for high productivity are all available. These bending machines produce repeatable, high quality bent tubes for the automotive, auto component, furniture, chemical, boiler, process, luggage, ship building, railway and other industries.

• Machine Type: Cnc Wire Cutting Machine
• Automation Grade: Automatic, Fully Automatic
• Certification: ISO 9001:2008
• Machine Weight: 100-1000kg
• Color: Black, Brown, Grey
• Voltage: 220V
• Condition: New, Used
• Rated Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year, 2years
• Rated Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Warrenty: 1 Year, 2 Years

• Usage: WIRE MESH WELDING
• Wire Size: 2 to 5 MM

Wire Cutting Machine, Used for light weight block making mchine , Advance systems, Pnumatic systems, We offer AAC Plants & CLC Plant that provide superior insulation, value effective and durable answers to the civil enterprise. Our AAC Plant produces mild weighted autoclaved aerated concrete (AAC), which can be fashioned by way of mixing silica wealthy material, lime, cement and aluminum powder. While manufacturing AAC, aluminum is brought as a catalyst and generates hydrogen gasoline upon reacting with cement and lime. Our production flora devour a minimum amount of electricity and continues its energy over a time frame. Our AAC plant life & CLC plant do no longer require routine maintenance as in the case of clay bricks.

• Weight: 24 Kg
• Voltage: 220 V
• Power: 100 W
• Frequency: 50 Hz
• Wire Diameter: 1.0 mm to 3.5 mm
• Length Setting: Min 10 mm to Max 9999mm
• Time for cutting Length: T =(L/132+ 1) sec mm
• Output per Hr for Length L: 3600/T
• Cutting Tolerance: + 2.0 mm
• Dimensions: L-420 W-320 H-360 mm

• Cutting Length: 0.1 to 9999mm
• Stripping Length: 0.1 to 99 mm (As per wire material)
• Twisting Length: 0.1 to 99 mm (As per wire material)
• Wire Diameter: AWG 16 to 32
• Power: 220 VAC, 50 Hz, 200W
• Dimensions: L-570mm W- 380mm H-440mm
• Weight: 40 Kg
• Productivity: Wire Length 100mm – 8420pcs/hrs. 500mm-5380pcs/hrs. 1000mm-3720pcs/hrs.

DESCRIPTION : • Suitable for Cutting and stripping operation • Twisting option available in Model AWS 220 T • Can feed & cut two wires • High Speed and accuracy

• Material: Mild Steel
• Mesh Width: 4 ft to 8 ft

Compact rigid T base structureJapanese AC Servo drive for all 5 axesDirect Coupling for AC servo motorsC3 grade Japanese ball screwsTable moving structureCompact footprintFront Loading MachineHigh Precision LM guide ways

• Usage/Application: WIRE HARNESSING
• Automation Grade: Automatic
• Production Capacity: 701-800 kg/shift

Diamond Segments For Saws , Wire Saw Or Gang Saws. Comprising Of Powder Mixing Cold , Compacting , Hot Sintering , Brazing Etc. Machines Upto 120 Tons And Hot Sintering Machines 120 Kva 40 Tons With Vacuum Are Available .

We are offering wire marking machines. Schleuniger offers a comprehensive line of accessories to enhance your wire processing production methods from start to finish. All accessories easily interface with schleuniger’s complete line of wire and cable processing equipment.

• Voltage: 220V/1PH/50HZ
• Material: Metal & Steel
• Type: Spiral Wire Forming Machine
• Weight: 100-200KG
• Condition: New
• Power: 60/50HZ
• Computerized: Yes

We are the main supplier of this product.

• Material: Stainless Steel
• Wire diameter range: 2 mm to 5 mm
• Paramter Set up: on HMI
• Welding Speed: More than 70 strokes per min
• Weld Mesh Material: Galvanised and MS steel
• Machine Size: 4 ft to 8 ft
• Mesh Pitch: 17 x 17 mm

Impulse Welding is an ultra modern way of metal joining, which replaces many other techniques such as riveting, soldering or conventional a welding. The actual welding takes only a few Milliseconds (Tentatively 5 to 8 mSec) so only the very welding zone is heated up while neighboring zones remain practically cold. There is no distortion, tarnishing, discoloring or annealing of metal around the welding zone. Welding time is so short that sufficient melting heat is produced in the welding zone before heat dissipation starts, unavoidable with longer welding times. This also means that the total amount of heat applied is small as possible as – hardly higher than necessary for the weld itself. The welded parts stay practically at room temperature. The high currents from Impulse Welders make this method applicable even for metals of high electrical and thermal conductivity such as copper, silver, gold and even platinum. With Impulse Welding machines, electrode cooling is not required even at very high production rates. Electronically stabilized charging with proper feedback keeps the voltage across the capacitor absolutely constant and gives constant welding energy even at power line variations giving highly reproducible welding results. In the Impulse Welding the required welding energy is stored in a CAPACITOR BANK, being charged during the intervals between welds. As the charging of the capacitors takes place at quite slow rate, there is a great saving on power supply requirements as compared to conventional ac welding machines. There is no sudden heavy burden on the mains supply creating problems to other machines and environment. Production speeds are limited only by the time required for job feeding mechanism, which is sufficient time for recharging the required capacitor banks, because of negligible short welding times. Welding performance is dependent on Welding Energy and Applied Pressure. With Capacitor Discharge welding machine, the Energy is maintained constant and the pneumatic Weld Head maintains the required pressure. A special pneumatic Weld Head is provided for welding very fine wires. This special unit applies very low pressure for fine wire welding, which is adjusted for different type of jobs, depending upon the size, type conductivity and type of the material to be welded. A Simple Manual Weld Held can also be provided for non critical applications.Potential Free contact is provided for inert gas purging (both post & past time) operation. Separate Manual operation is possible for trials and testing.   ADVANTAGES :  • Welding without oxidization, distortion annealing or discoloration• Welding close to heat sensitive parts.• Good welding results with metals of high electrical and thermal    conductivity.• Welding of parts of different cross sections and materials.• Very high productivity• High repetitive rate possible• Long Electrode life, with no cooling requirements• Welding of both Ferrous and nonferrous metals.• Welding not affected by Power Line fluctuations• Welded parts can be of less tolerance and may not need cleaning.• Power supply connection just 5 Amps     Welding of Fine Wires is another task. The Welding Energy as well as pressure during weld is very critical for welding. We have developed a special pneumatic fixture with adjustable differential pressure, so as to take care of the above requirements. With this fixture and the machine we can weld 40-44 SWG Pt to PtPtRh15% or PtPtRh13% wires, without the requirement of any skilled personnel. The production cycle can be about 6 seconds each.

Tank will be made up of SS 304, 16 gage material. All bends of tank would be rounded @ radius of R10. A lid will be provided for the tank, which would be made of SS304, 16 gage materials. Drain: 12 "ss ball valve will be provided for solvent drain. Equipment body will be made of SS material. FEATURES:- Powerful & reliable cleaning Built in microprocessor Built in digital thermometer & timer to set optimum conditions. Built in drain valve unit. Silicon rubber heater for durability & stability. Built in alarm function for noticing operation STOP.

With our in-depth knowledge of this domain, we are actively engaged in providing an excellent quality range of Super Fine Wire Drawing Machine.

We are offering Wire Cutting Machines to the clients. These Wire Cutting Machines are used for cutting a variety of wires. These Wire Cutting Machines offer efficient cutting, and are available in various specifications. These Wire Cutting Machines are made up of quality basic material, and are used in several industries. We offer Wire Cutting Machine at market leading prices. Wire cutting machine is the heart of the AAC plant. Our wire cutting machine is two stage cutting one is horizontal and the next is vertical. We have many special functions such as embossing the symbol of the manufacturer on the brick. The design is so simple and maintenance free.   Minimum Order Quantity : 1 PlantPrice : 1.5 Cr to 2.5 Cr

• Max width: 600 mm

The profound experience that we have in this industry helps us in manufacturing quality assured Wire Mesh Welding Machine. These plants are a perfect combination of modern technology and user convenience.

ORION Ultrasonics providingsuggesting, tanks are made out ofS.Spolypropylene PPH with one storage tank and one overflow tank in order to avoid bending of the wire. LiquidChemical transfer pump is provided to transfer the chemical from the storage tank to the overflow tank.After the chemical cleaning processoperation, water rinsing is necessary, to remove the chemical residuals. we have developed a jet spray system for the best rinsing effect for each wire. In addition, system is provided with efficient air wiping to avoid carry over of chemical as well as drying of the wires. We are manufacturing the wire cleaning systems as per customer’s requirement.