Wire Making Machines Dealers in Bhosari, Pune

• Conductor/Core Diameter: 8mm to 135mm
• Finished Diameter: 10mm to 150mm

Insulating and Sheathing lines are the primary products of Royle. Royle supplies complete system for Insulation of cables with line speeds as high as 1000 MPM, which varies for different conductor sizes. All equipment in the line is selected by Engineering Experts while considering optimum performance and least down time. The extruder sizes for the Insulating line vary from 25mm to 100mm. The system is used for basic products such as House Wiring Cables and even for Category Cables. The Sheathing lines are offered with line speeds up to 100 MPM for cable diameters up to 160mm. The Extruder sizes vary from 80mm to 200mm. The accessories such as Chalk Applicator, Semiconductor Skin Extruder, Graphite Applicator, etc. are chosen as per the product specifications. The basic System consists of Pay-offMetering CapstanMain Extruder and Auxiliary Extruders with accessoriesCooling TroughCapstanSpark tester and Diameter GaugeDancer/Float RollTake-upAuto-line Control System to integrate and control the line with most modern features

Applying shields (caps) for sealing of bearings Checking of torque to ensure the fitment of shields Cycle time: 5 sec Tooling setting time < 20 mins Measuring station for shield fitment checking FEATURES PLC Control system: Mitsubishi / Delta Pneumatics: Festo / SMC HMI touch screen 7 inch Switch gears: Schneider, Siemens. Precise measurements using Std LVDT probes  

User interface with touch screen HMI This system is combination of both above NFD systems. Strip status display on HMI similar to camera display Production counters (Good/Empty/Partial) Foil joint detection & rejection (Optional) Dry Printing & sealing rejection (based on time only) Tablet hold provision for foil joint & printing rejection Interface to ALU foil pin hole detector for strip rejection

• Material: Stainless Steel
• Wire diameter range: 2 mm to 5 mm
• Paramter Set up: on HMI
• Welding Speed: More than 70 strokes per min
• Weld Mesh Material: Galvanised and MS steel
• Machine Size: 4 ft to 8 ft
• Mesh Pitch: 17 x 17 mm

The company has firmly cemented its position as a Manufacturer, Exporter and Supplier of CNC Multi Torch Strip Cutting Machines in Pune. The CNC Multi Torch Strip Cutting Machines are useful when large amounts of strips are to be cut. The CNC Multi Torch Strip Cutting Machines are available at the best prices and are timely delivered. Details Useful for applications requiring large amounts of strips to be cutSingle torch can cut strips from 50 mm to 300 mm width and thickness up to 80 mm

• Automatic Grade: Automatic, Semi-Automatic
• Machine Type: Sheet Crimping Machine

• Material: GI
• Capacity: 2-5 ton
• Surface Finishing: Galvanization
• Application: Construction Industry, Warehouses, Pulling

Spring Band Clamp Inspection Machine is used for inspecting spring band clamp parameters such as Inner Diameter(ID), Outer Diameter(OD), Height, Angle etc of SB Clamp. It is inspected by machine vision technology. Machine Vision technology give speed , accuracy and reduces man work.

• Material: Mild Steel
• Mesh Width: 4 ft to 8 ft

• Rated Power: 440 V AC, 3 phase, 7.5 HP
• Max tube dia.: 60 mm
• Max tube length: 400 mm
• Max tube thickness: 3 mm
• Rolling force: 1.5 Tone (Hydraulic, settable)
• Hydraulic: Rexroth/ Yuken
• Control electric: Siemens
• Pneumatic: Festo/ SMC

• Material: Metal
• Feature: Rust Proof
• Warranty: 1 Year
• Color: Black & Red
• Advantage: Easy to use
• Surface: Polished
• Use in: Gym

• Country of Origin: India
• Color: Grey
• Automatic Grade: Semi Automatic
• Type: Wire Heater Machine
• Condition: New
• Brand Name: KEJETHERM

Heating Elements 15 Kva For Annealing With Water Sprinkles To Form In Various Shapes And Coils.

• Weight: 100-1000kg
• Finishing: Chrome Finish
• Width: 100mm to 1200mm
• Packaging Type: Wooden Box
• Pressure: Medium Pressure
• Phase: Three Phase
• Working Capacity: 5 ton
• Usage: Coil And Sheet Straightening, Strip Straightener Machine
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Brand Name: Sarthak Enteerprises
• Material: all type
• Certification: ISO 9001:2015
• Color: White
• Voltage: 220V
• Condition: New
• Rated Power: 2 HP TO 10 HP
• Driven Type: Pneumatic
• Warranty: 1 Year
• Country of Origin: India
• Corrosion Resistance: Yes
• Machine Structure: Horizontal
• Operating Type: Automatic
• Reverse Rotation: Yes
• Is It Variable Speed: Yes
• Diameter: 52MM TO 90MM
• Thickness: 0.2mm to 14mm
• Rotating Speed: 20M PER MIN.
• No Of Roll: TOTAL 11 , 13, 18
• Warranty: 1 year
• Accuracy: 20 to 30 micron
• coil width: 100 mm, .,,,,,,,,.....1200mm
• strip thickness: 0.2mm .................14mm

• Certification: ISO 9001:2008
• Voltage: 220V / 50 Hz
• Type: Wire Cutting Machine
• Compressed Air Connection: 5 to 7 bar, 70 to 100 psi, 100 Ipm
• Max. Outer Diameter: 4 mm
• Wire Cross Section: 0.2 to 1.5 mm
• Accuracy: +/- 0.2%

features: machine for 2 wires at a time, of upto1.5 mm2 high speed machine upto 2 mid-marking (for middle strippings) possible machine and controls in a single housing salient feature:- machine controlled with plc. touch panel display having easy to use graphic interface fully automatic machine. The setting is completely digitized and mostly automatic. machines for both side stripping. (can also do single side stripping and also only cutting). "microprocessor controlled machines with the smart display. fully automatic machine. The setting is completely digitized and mostly automatic. compressor not required, silent operation.

Combined Drawing Machine, Homogenizer

We Power Hydraulic Services are leading manufacturer and supplier of Rolling Shutter Strip Making Machine in India from Pune Maharashtra. Rolling Shutter Strip Making Machine manufacturer, Rolling Shutter Strip Making Machine manufacturer in India, Rolling Shutter Strip Making Machine manufacturer in Pune, Rolling Shutter Strip Making Machine manufacturer in Maharashtra, Rolling Shutter Strip Making Machine supplier in India, Rolling Shutter Strip Making Machine supplier in Pune, Rolling Shutter Strip Making Machine supplier in Maharashtra We are manufacturer, supplier, and exporter of Rolling Shutter Strip Forming Machine. This machine has great strength and robust structure. We use latest technology and premium grade steel to make the Strip Forming Machine.Our Strip Forming Machine is easy to operate and highly safe. Necessary specification of Strip Forming Machine is given below: Fitted with number of rolls Desired strip are formed in single pass Best for making rolling shutters Lubricant arrangements at gunmetal bearing High machine speed.

Pipe Swaging Machine

We are offering Wire Cutting Machines to the clients. These Wire Cutting Machines are used for cutting a variety of wires. These Wire Cutting Machines offer efficient cutting, and are available in various specifications. These Wire Cutting Machines are made up of quality basic material, and are used in several industries. We offer Wire Cutting Machine at market leading prices. Wire cutting machine is the heart of the AAC plant. Our wire cutting machine is two stage cutting one is horizontal and the next is vertical. We have many special functions such as embossing the symbol of the manufacturer on the brick. The design is so simple and maintenance free.   Minimum Order Quantity : 1 PlantPrice : 1.5 Cr to 2.5 Cr

Swaging Press Suitable for use as small workshop equipment capable of being used as portable equipment.Swage adujestment is achieved by graduated back, the operation being controlled by means of foot operated Hydraulic Valve for the power operated version.Swaging Press is designed for the rapid swaging of Flexible Hose Assemblies by following a Simple sequence of operations, the ferrule, hose and insert can be swaged in one contineous operation by a hydraulically applied load.   Features   Indigenously developed. Suitable for all international swaged fittings. High pressing force. Quick gripping electrical operation. Radialy self agligning tooling. Depth setting micrometer for 0.1 mm accuracy. Fast remounting and easy handling

Enamel Wire Stripper, load cell cables, Sealing Wire, nickel alloys wires

CNC COIL WINDING MACHINE Stand alone MicorocontrolleR, Multi Axes Coil Winding SPM's , Anti Vibration Die Cast Body, Crimping Machine & Custom built.

• Brand Name: Sai Automation
• Material: Metal
• Surface Finish: Color Coated
• Voltage: 280 V
• Frequency: 50 Hz

Hose Crimping Machine, Hydraulic Pumps, Hydraulic Valves, Hydraulic Motor

The KP 1200 SF is mounted on steel tracks to ensure maximum stability and grade-ability. KP 1200 SF comes loaded with a dedicated drive pump plus a world class torque hub with heat treated sprockets and an easy track adjuster, automated single-point electronic sensor system controls grade, steering & cross slope, fully variable vibrators enhance the machine's capability to adapt to different slump levels in the concrete mix.

Cnc coil winding machine • stand alone micorocontroller • multi axes coil winding spm's • anti vibration die cast body • crimping machine & custom built.

cnc wire cutting machines, Dies, Jigs, electric discharge machines