Shri Balaji Alloys Corporation Kabir Nagar, Raipur, Chhattisgarh

MAXIDURA 308L  is a low carbon 19/10 (Cr/Ni) stainless steel electrode with properties like oxidation and corrosion resistance electrode with properties like resistance to oxidation, resistance to cracking. The extra low carbon decrease the possibility of  intra granular  corrosion, fine bead appearance, shiny finish, spattter free and self peeling slag. Electrode is recommended for welding AISI 301L, 302L, 304, 308 and welding daily machineries, components, equipment's, used in petrochemical, chemical and fertilizers industries.

Type : Stainless Steel Rods

Certification : ISO 9001:2008 Certified

Application : Doors, Grills, Gym

Brand Name : MAXIDURA

Dimension : 4X350MM

Steel Grade : 308L

Brand Name : MAXIDURA

Size : 2.5MM / 3.15MM / 4MM

maxidura sp product details it is a rutile type stainless steel electrode producing weld which have complete freedom from hazard of cracking on a wide variety of similar and dissimiliar material including difficult steel. identify suitable for welding of a variety of unknown composition steel, lead and coil spring and other difficult to weld steels  application heavy machinery parts, earth-moving equipment parts, automobile springs, trunnions of cement mill and other allied components, parts subject to heat, corrosion and impact. joining and surfacing of high carbon, low and high alloys steel, tool steels, spring steels, manganese steel, case hardening steel, high speed steels, cast steels and for difficult to weld steels and unidentified steels. for joining of  such steels with one another. the surfacing of grooved rolls and the repair of drop-forge died gives very good results.  as a cushioning alloys under hard deposit   properties electrode has very soft arc and gives smooth and defect free austenoferritic weld metal almost no distortion and embritlement of the base material the deposit is resistant to friction, heat and corrosion, is work hardening and shock proof practically no spattering and no undercut   procedure clean the weld area thoroughly and prepare joint edge. preheat high alloy and high carbon steel to about 200-250 degreec followed by slow cooling after welding. use short arc with stringer bead technique

Type : Welding Electrodes

Material : DISSIMILAR & UNKNOWN STEEL JOINING

Certification : ISO CERTIFIED

Length : 350 Mm

Application : Welding Purpose

Feature : High Clarity, Proper Working, Smooth Texture, Temperature Maintained, Uniform Finish, Water Proof

Condition : New

Current Type : AC, DC

Brand Name : Maxidura

MAXIDURA HF-102 Application A  Medium  Heavy  Coated   Hydrogen Controlled  Electrodes. Specially  for joining and overlay work for the steel mills and forging industry. The Electrode gives smooth arc. Less spatter and easy detachable slag. can be used in all position and designed for specially SG  steel.   Properties Basic, all position electrode The deposit is particularly resistant to impact. Hardness 38-42 HRC   Procedure Clean the surface thoroughly.  Remove all cracked and spalled metal. Use short arc and lay stringer beads. Weld 2-3 layers. Finish weld metal by machining.  

Type : Welding Electrodes

Material : SG Iron

Thickness : 0-5mm

Certification : ISO CERTIFIED

Length : 250-500mm

Application : Welding Purpose

Condition : New

Feature : High Clarity, Proper Working, Smooth Texture, Temperature Maintained, Uniform Finish, Water Proof

Current Type : AC, DC

Brand Name : Maxidura

Packaging Type : Box

Established in 2010, we are a Raipur-based company engaged in manufacturing, supplying, and exporting Adamite Steel Welding Electrodes. These are used in heavy-duty industries for welding medium and heavy sections. They are primarily used in applications where good wear resistance is important along with considerable strength and toughness. Offered Adamite Steel Welding Electrodes are highly appreciated for their strength, toughness, and hot crack resistance. We offer these electrodes in varying specifications as per requirements of clients.   Features: High wear resistance and strength Inner hardness is same as that of the surface Stronger than cast iron

Application : Industrial Use

Brand Name : MAXIDURA

We are an 8-year-old Raipur-based company engaged in manufacturing, supplying, and exporting Alloy Steel Welding Electrodes. They are designed and fabricated at our state-of-the-art facility using high-grade steel alloys. These electrodes play an important part during welding process as they help maintain a uniform current density, concentrate current at welding points, and maintain thermal balance during welding. Offered Alloys Steel Welding Electrodes are highly appreciated by our clients for their high tensile strength and corrosion resistance.   Features: High tensile strength Can be used with AC or DC power Excellent deslagging

Type : Alloy Steel Rods

Material : Adamite Steel

Certification : ISO 9001:2008 Certified

Length : 350 Mm

Application : TMT Rolling Mill Application

Condition : New

Brand Name : Maxidura

Size : 4.00* 450MM

MAXIDURA CI-109 is a hot and cold welding of cast iron parts of grey cast iron, nodular graphite iron, and malleable iron subject to heavy wear.  Joining of cost material with steel. The electrode is most suitable for the surfacing of the above materials. Casting, machinery parts, bearing blocks, frames, foundry castings etc.

Type : Cast Iron Electrodes

Material : Iron

Length : 350 Mm

Grade : A

Brand Name : MAXIDURA

MAXIDURA-550 is a Rutile type medium coated hardfacing electrode producing air hardening type hard weld metal which is non machinable and resistant to severe abrasion and moderate impact or both together in service. Easy operated on DC(-) and AC. Suitable for mine rails, crusher, hammer, drilling bits, bamboo and cane cutting knifes, conveyor buckets, crane wheels, oil expeller etc.

Type : Hardfacing Rods

Material : Hard Facing Welding Electrodes

Thickness : 3.5-4mm, 4.5-5mm

Certification : ISO CERTIFIED

Length : 350 Mm

Application : Welding Purpose

Condition : New

MAXIDURA HF-350 is a Rutile type medium coated hardfacing electrode producing air hardening type carbon- chromium alloy. The weld deposit is machinable and resistant to moderate abrasion and impact. Ideally suitable for hardfacing wheels, shear blades, cams, pulley, sprockets, gears, crane wheels, roll, wobblers etc.

Type : Welding Electrodes

Material : Hardfacing Welding Electrode

Certification : ISO CAERTIFIED

Length : 350 Mm

Application : Welding Purpose

Condition : New

Brand Name : Maxidura

Application For joining manganese steel parts, hardfacing of parts subject to heavy impact and stress. For use on big crushing equipment for rocks, jaws, cones, gyratory crushing mantles, excavator teeth, manganese rails etc.   Properties The deposit is work-hardening type and highly resistant to cracking and deformation during working. Excellent abrasion resistance in the work-hardened condition. Prolonged working life even when subjected simultaneously to impact and abrasion.   Procedure Ensure proper cleasing of the area to be welded. Remove the fatigued area by gouging, using Groove alloy, do not preheat manganese steel. Interpass temperature should be kept below 150 Degree c using staggered or skip welding. Hot peening helps reducing stresses. Cool slowly. For small component immerse in water.

Type : Welding Electrodes

Diameter : 350 Mm

Certification : ISO CERTIFIED

Application : Welding Purpose

Condition : New

Current Type : AC, DC

Brand Name : Maxidura

Application A Hard facing, electrode, operates well in all conventional positions. Typical applications include chipper knives, conveyer bucket lips, shear blades, rock crusher, rock drill, tractor grousers, hot work dies, crusher hammer, final layer on manganese steel parts  subject to high abrasion or impact to protect it from initial wear.   Properties Basic, all position electrode. The deposit is particularly resistant to heat. Hardness 44-46 HRC.   Procedure Clean the surface thoroughly.  Remove all cracked and spalled metal. Use short arc and lay stringer beads. Weld 2-3 layers. Finish weld metal by machining.

Type : Hardfacing Rods

Material : Hardfacing Welding Electrode

Shape : Round

Thickness : 3.5-4mm, 4.5-5mm

Certification : ISO CERTIFIED

Length : 350 Mm

Application : Welding Purpose

Condition : New

MAXIDURA HF-100 Application Electrode for tough and wear-resistant surfacing alloy deposit. surfacing of parts subject to wear or impact. rims, carbon-alloyed rails, dies, striking tools, rolling surfaces, sliding surfaces subject to heavy wear, matrixes, stampers, etc,   Properties Basic, all position electrode. The deposit is particularly resistant to impact. Thick surfacing without intermediate layers possible.   Procedure Clean the surface thoroughly.  Remove all cracked and spalled metal. Use short arc and lay stringer beads. Weld 2-3 layers. Finish weld metal by machining.

Type : Welding Electrodes

Certification : ISO CERTIFIED

Application : Welding Purpose

Brand Name : Maxidura

Packaging Type : Box

Operating Current : AC

Your search for the best CI electrode manufacturer in Chhattisgarh is over with us. Our company Shri Balaji Alloy Corporation is ranked the best among the foremost companies that are engaged in offering a qualitative range of electrodes of Iron Welding electrodes, useful for heavy workpiece. These electrodes are manufactured by our experts and professionals using the enhanced materials in accord with global standards. We being the best CI Electrodes supplier in India, ensure that our products are top-class and we ensure that the raw materials that are used in our production are top-class. We source them from the best dealers and suppliers in the country. Our company is well-established and has advanced machines and tools for the production of our products. The offered electrodes are used for the joining of high strength steel and irons. Our company is termed as the cast iron welding electrodes supplier in Raipur. The products that we have been known for their features. They are: Unmatched Quality The products of our company are quality assured and meet the predefined parameters set in the industry. High Durability The welding electrodes of cast iron that we have are durable and long-lasting. This is also a reason why they are so popular in the market. To know more call us and choose our welding electrodes cast iron for your use.

Type : Cast Iron Electrodes

Material : Cast Iron

Thickness : 4.00 X 350MM

Feature : Durable, Fine Finished, Perfect Strength, Rust Proof

Brand Name : Maxidura

MAXIDURA MS is a medium coated general purpose rutile type of mild steel electrode, designed for welding applications of structural importance in general fabrication and repair work. The electrode is characterized by smooth & stable arc, low spatter and easy slag detachability, fine rippled & shiny bead of excellent profile. electrode is recommended for welding of tanks & vessels, general fabrication, vehicle, railway wagons & machinery, shio building construction, light structural steel work, storage tanks etc.

Type : Mild Steel Welding Electrodes

Certification : ISO CERTIFIED

Length : 350 Mm

Application : Mild Steel, Welding Purpose

Condition : New

Brand Name : Maxidura

Material : Stainless Steel

Diameter : 3.15MM / 4MM

Payment Term : ADVANCE PAYMENT