Anti Collision Device Dealers in Rajkot

• Brand Name: Top Crane
• Material: IP-55
• Application: Eot Crane
• Country of Origin: Made in India
• Model Number: ACC03 and ACC10
• Voltage: 440v
• Alarm Signal: 10 Meters
• Measuring Range: 1 to 10 mtrs
• Sensors At Distance: 3 Meter

We are one of the reputed organization engaged in providing superior quality Anti Coilision Device. These Coilision Devices are good demand in the market due to high quality and durability. These products are available in market at competitive rates

• Brand Name: Electro power

We are offering anti collision device. The system works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stopsreduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty.

• Output: Potential free contact rated at 5 Amp @ 230V AC
• Supply: 110 V AC & 220V AC, 50 Hz
• Range: 3 / 10 / 15 / 20 /30 Meters Available
• Indication: LED

The Anti–Collision Device (ACD) is a self-acting microprocessor-based data communication device designed and developed by Embicon Tech hub for Application of Crane Anti collision system. For Laser base EOT Crane Collision avoidance system and make crane safety. Embicon is leading manufacture of Crane spare and safety Device. The Anti-collision system is a safety device to avoid to collision of two electric overhead traveling cranes working on the same rails. For one pair of cranes two sets of anti-collision systems are required. Each set consists of an Emitter/sensor module and a Reflector.The System works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stops/reduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. Laser Alignment Tool for alignment of reflector and control unit.Terminal Strip Connections:1. P – Phase 220V AC CAUTION : Connect 110V / 220V AC2. P – Phase 110V AC at appropriate terminals.3. N – Neutral Never connect 220V AC supply4. E – Earth to 110V AC terminal No. 25. NC -OUTPUT – Normally closed contact6. C -OUTPUT – Common7. NO -OUTPUT – Normally open contact

We are offering anti crane collision switch the anti crane collision switch is designed to avoid the collision of two adjacent cranes in the same bay running on the same rails. This system when installed on the two adjacent cranes will avoid the collision of two cranes. The system works on the principle of retro -reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activates an alarm signal and stops reduces the speed of the crane . Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The distance between the reflector and the sensor to detect the presence of infrared waves can be adjusted with the help of the potentiometer provided on the system. The maximum distances between the two cranes to generate the alarm signal can be maximum 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. specifications: measuring range: 1 to 10 mtrs sensors at distance: 3 meter alarm signal: 10 meters

• Material: Metal
• Application: In automobiles,cranes
• Power Supply: 110V AC to 230V AC

Anti Crane Collision Switch, Radio Remote Control, I Beam Trolley

We are offering anti collision device. our product range: ø thruster brakes ø rotary gear limit switches, weight operated (gravity type) limit switches, lever type limit switches, ø festoon system, ø shrouded bus bar system(complete crane electrification) ø anti collision device, ø master controller, ø resistance box, ø dsl indicating lamp, ø magnetic disc brakes, ø ac solenoid shoe brakes, ø gear coupling & nylon gear coupling ø radio remote control system. ø pendant station. ø wire rope ø brake drum………etc

Crane Anti Collision Device, Cable Carrier For I Beam & T Channel