Barrels Dealers in Kuvadva Road, Rajkot

• Brand Name: Pragati
• Type: Barrel
• Place Of Origin: Rajkot  
• Model No.: PB250E
• Size: 3 to 4 inches

Load the polishing barrel with wire nails 3 to 4 inches above the half size of the barrel Fix up Perforated Lid & Tumble it for about 20 Minutes this will remove chips from nails (if nails are rusty then first of first load nails and Mix a little quantity of paraffin oil (Half litter Kerosene) prior to loading of Saw Dust & Tumble for 10 Minutes) now after that add saw dust in remaining portion & fix up Blind lid & tumble for 30 minutes. Take out blind lid and fix up perforated lid to take out Saw Dust from the barrel by rotating. Continue this process again for about 40 minutes loading the barrel with fresh saw dust. This will result into bright shining look of Wire Nails. The Saw Dust used in second sequence can be re-used for the first cycle of the same process in next batch. This ensures economy of Saw Dust and solving the storage space. If the mirror finish is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequence of polishing instead of Saw Dust, 15 to 20 Kgs. of such LEATHER PIECES are required for out 250 Kgs. Capacity Polishing Barrel. These LEATHER PIECES can be applied again and again for about 15 to 20 cycles till they become very oily.

Tips On Polishing Wire Nails 1. Load the polishing barrel with Wire Nails up to a level 3 to 4 inches above the half filled level. (If nails are rusty, ad half a litere of Kerosene before adding saw dust and run the Barrel for about 10 minutes with blind lid fixed) Add saw dust in the barrel the upto 80% of the full level. Fix the blind lid and run the barrel for about 40 minutes. Stop the barrel and change the lid from blind to perforrated. Run the barrel for about 45 minutes with perofrrated lid in order to remove the saw dust. This will result in bright & shiny nails. 2. If the mirror finished is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequences of polishing instead of Saw Dust 20 to 25 Kgs. Of such LEATHER PIECES are required for our 250 Kgs. Cap. Polishing Barrel. These LEATHER PIECES can be applied again for about 15 to 20 cycles till they become very oily.

We are one of the best Exporters and Suppliers of Screw Barrels around the world. Made using special Alloy Steel, our Screw Barrels are well nitrated and polished so as to make them suitable for all types of polymers. Additionally, our Screw Barrels are accurate in dimensions due to which they perform beyond expectations.

We offer closed head barrels. Specification : * 2" and 34" tri sure plugs additional fitting replacements availble * united nationals certification * available in stainless steel : 304,316,202 * bottom and top triple folded with seam welding * available in open head air tight & tight head. Air tight with two mouth of 2" & 34" width. * available in plain design & with hoops.

We are engaged in offering a wide range of polishing barrels, which is widely used to polish the nails. Basically, the nails that are polished by this barrel are manufactured using wire nail making machine. Due to this nail drawing process, the nails designed exhibit dullness. At times, the wide assortment of these nails also gets rusted due to the humid or wet weather condition. This, in order to offer superior quality nails to our esteemed clients, the manufactured nails are polished by the polishing barrel to impart brightness and shining look.

We are engaged in providing high quality Polishing Barrel Drum to the clients. Our Polishing Barrel Drum is manufactured using quality components that are procured from trusted vendors. With its sturdy construction and durability, our Polishing Barrel Drum stands alone in the market. With such features, the cost-effectiveness of the Polishing Barrel Drum acts as an add-on for the clients. Why Our Polishing Barrel Drum? Sturdy constructionDurableCorrosion resistanceReliable Tips On Polishing Wire Nails Load the polishing barrel with Wire Nails up to a level 3 to 4 inches above the half filled level. (If nails are rusty, add half a liter of Kerosene before adding saw dust and run the Barrel for about 10 minutes with blind lid fixed). Add saw dust in the barrel the up to 80% of the full level. Fix the blind lid and run the barrel for about 40 minutes. Stop the barrel and change the lid from blind to perforate. Run the barrel for about 45 minutes with perforated lid in order to remove the saw dust. This will result in bright & shiny nails.If the mirror finished is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequences of polishing instead of Saw Dust 20 to 25 Kgs. of such LEATHER PIECES which are required for our 250 Kgs. Cap Polishing Barrel. These LEATHER PIECES can be applied again for about 15 to 20 cycles till they become very oily.

stainless steel narrow mouth barrels, stainless steel airtight containers

conical screw barrel, Screw Barrel, Twin Screw Barrel, Injection screw

AIR COOLED CYLINDER BARRELS, Compact Diesel Engine, diesel engine compressor

polishing barrels, Wire Nail Machine, fastener machines, nail cutter grinder

air cooled barrel, Piston Pin, valve tappets seats, Valve Seats, Tappets

barrels, Automobile Springs, Tension Springs (Extension Springs)

Air Cooled Cylinder Barrel, Forged Crankshaft, Cast Iron Cylinder Head