Bending Machine Dealers in Gondal Road, Rajkot (39 products available)

• Material: Mild Steel
• Finishing: Polished
• Weight: 650 Kg (Approx)
• Model: SBH -50
• Pipe: 45 x 4 (mm)
• Upper Roll Diameter: 150 (mm)
• Pinch: Single
• Driven rolls: Two
• Speed: 12 RPM
• Round Tube: 50 x 2 (mm)
• Square Tube: 40 x 2 (mm)
• Angle Iron: 35 x 5 (Double)(mm)
• Solid Square: 35 (mm)
• Flat Bar: 40 x 10 (Vert )
• T Shape Angel: 45 x 6 (mm)
• C Channel: 60 x 30 (mm)

• Type: Plate Bending Machine
• Weight: 100-1000kg
• Voltage: 110V, 220V
• Warranty: 1year
• Automatic Grade: Automatic, Fully Automatic
• Driven: Electric

With the support of our engineers, we are able to provide high performing Roll Plate Bending Machine to the clients. Roll Plate Bending Machine is assembled by making use of sophisticated components that ensure efficient performance, subsequently increases production capacity. Conical bending without any extra attachments can be done by Roll Plate Bending Machine. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done. Highlights Robust construction Smooth working Efficient design Longer service life Specifications The Pinch Cum Puramid Principle The machine based on this principle combine the advantages of three roll pyramid type, three roll initial pinch type and four roll pinch type machines. Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains. An error in pre pinching can be corrected even after the shell is completed. It can pre-pinch and roll the plate without removing the plate from machine after first insertion. Inclined movement of bottom rolls provides wider bending span as the plate thickness increases, and better grip in thinner plates. Cone Bending : The Machine has inherent feature for conical bending without any extra attachments. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done. Features Top roll drive for rolling thin plates. Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains. Plate Squaring(aligning) arrangement. Small dia. Top roll for small shell rolling (for reduced capacity). The Symmetrical Three Roll Principle of Plate Pre-Prinching & Rolling The plate is first lightly rolled over its full length. One of the bottom roll is brought near the top roll and plate edge is brought close to the tangent point. By lifting the other bottom roll, plate edge is pre-bent (pre-pinched) The Positions of bottom rolls are reversed (interchanged) for pre-bending second edge of the plate. Note that both the edges are pre-bent without turning the plate around. The rolls are brought in pyramid formation and cylinder is completed. Note that an error in pre-pinching can be corrected even at this stage.

• Material: Mild Steel
• Brand Name: RAJSHAKTI
• Automatic Grade: Automatic
• Country of Origin: Made in India
• Power Source: Hydraulic

The company is a recognized Manufacturer and Supplier of Hydraulic Pipe Bending Machine based in India. Our highly efficient Hydraulic Pipe Bending Machine is widely used for bending different types of pipes of various lengths and thicknesses. Hydraulic Pipe Bending Machine that we offer is automatic and thus very easy-to-operate. Available in different models, our Hydraulic Pipe Bending Machine is highly in demand by the clients owing to their excellent performance and pocket-friendly price.   Specialist : Steel Furniture & Railing, Pipe Bending's Gareda (Hand Bender Gareda), For round ring bending Machine & U Type Bending Machine maker & all kind of pipe bending gared.  

• Type: Automatic
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 220V
• Power: 3-6kw
• Warranty: 2 Years
• After-Sales Service Provided: Spare Parts
• Driven: Electric

Jayson Machine's (Impex) is acknowledged amongst reliable Manufacturers & Suppliers of Pyramid Roll Bending Machine. We manufacture Pyramid Roll Bending Machine using premium grade materials and component as per specified technical parameters. Our Pyramid Roll Bending Machine is low in maintenance and high in performance. Due to it less wear and tear quality, our Pyramid Roll Bending Machine is highly demanded by nationwide customers. We are committed to provide Pyramid Roll Bending Machine at very reasonable price.

Easy to maintain and useful for various jobs.   Modern design and rigid structure.   So simple mechanism that even semi-skilled worker can do accurate job.   Very useful for g etting Cylindrical shapes and better performance. It works with 3 Rolls pyramid principal. Bottom rolls are fixed and driven by Gears and warm Reduction Gear Box. Top roll rotates in fixed position and can be adjusted up & down manually by adjustable screws, in mechanical version and by Hydraulic system & cylinder In Hydro mechanical version.   Housing are made from M. S. plate of suitable strength and mounted on heavy base frame, Rolls are made from forget steel and perfectly machined for accurate result. For correct feeding and grip axial grooves are provided on botton rolls. Screw jack/extra Hydraulic cylinder is given to keep top roll horizontal when formed shell is to take out.   Our machines are fitted with Electric Brake Motor and Movable Control Panel, so that machine can be stopped at any stage of operation, hence the shape in rolling as per requirement is most possible and due to the movable control panel machine can be operated very easily.   Machine is fitted with total 2 nos. Gear Box, Electric Brake Motor, Push Button Type Movable operating switch board and Electric control panel for easy & safe operation.   We only offer the machine with double Gear box, one is warm Gear box and another is spur reduction gear box, due to this the fatigue in operation and over load on electric motor and warm reduction Gear box is totally avoided even when machine is Working in over capacity and more over bending operation be come more easy.   Whole machine is made out of quality prime materials.   Only Top Roll Pressing (Up-Down) and opening closing of drop end are through hydraulic system & cylinders all other operations are carried out mechanically in hydro-mechanical version. In mechanical version Top Roll Pressing is manually by means of screws and opening/closing of end-dropper is manual or motorized.   Hydro- Mechanical Machine required lees man power compare to mechanical version, the same directly Effect your production rate and finish job value.   Apart from above the rates are more competitive in its range.

• Usage/Application: BENDING
• Brand Name: TECHNEX
• Automatic Grade: Automatic
• Country of Origin: Made in India
• Model Name/Number: TM CNC BEND
• Bending Material: Mild Steel
• Material: Ms

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like dust, rain, sunlight, etc. We are backed by a modern transportation facility that ensures safe delivery of the orders at required destinations.

• length of: 2500mm to 5000mm

Pyramid base principle 3 & 4 Roll Hydraulic Plate Bending Machine Used for roll bending of plates with pre-pinching Product like Vessel & Tanks, Cone, Silos, Over & Under Storage Tanks, Heavy Transmission Pipe, etc.

• Type: Bending Machines
• Color: Black, Brown
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Operating Type: Automatic, Fully Automatic, Manual, Semi Automatic
• Usage: industrial
• Specialities: High accuracy, Durable, High Strength,Energy Efficient

• Max Bending Radius: 6MM - 28MM
• Automatic Grade: Semi-Automatic
• Rated Power: Hydraulic
• Power Source: Electric
• Model Name/Number: NBM 35

Specifications:   The Pinch Cum Puramid Principle   The machine based on this principle combine the advantages of three roll pyramid type, three roll initial pinch type and four roll pinch type machines. Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains. An error in pre pinching can be corrected even after the shell is completed. It can pre-pinch and roll the plate without removing the plate from machine after first insertion. Inclined movement of bottom rolls provides wider bending span as the plate thickness increases, and better grip in thinner plates.   Cone Bending   The Machine has inherent feature for conical bending without any extra attachments. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done.   Salient Features   Top roll drive for rolling thin plates. Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains. Plate Squaring(aligning) arrangement. Small dia. Top roll for small shell rolling (for reduced capacity).

We are manufacture & exporter of ring bending machines and these machines is use for channels, angles, flats & pipe. These ring bending machines are made from premium quality of raw materials.

Hydraulic Plate Rolling Machine fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame and closed box type. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

• Automatic Grade: Automatic
• Material: MS
• Power Source: Electric
• Lenght: Up to 10 feet
• Capacity Tonnage: 60 to 125 Ton
• Thickness: Up to 16 mm

We are manufacturing and supplying an exquisite range of bangle & banding machine. Features: hassle free operations minimum maintenance long operational life.

• Application: Industrial
• Brand Name: RC
• Shape: Round
• Roller Diameter: 50 - 219 mm
• Roller Length: 200-3400 mm
• Surface Coating: Paint Coated

Mechanical Plate Bending Machine is another range of machines offered by us. These are offered with pneumatically operated multi disc and friction clutches that have a mechanical over crank. Its sophisticated design ensures consistent production accuracy and faster operations. Our range offers excellent performance and high durability and can be availed at industry leading rates   Details MACHINE APPLICATION & USEGE: Boiler Tank , Air Conditioning Channels, Sheet Metal Cover Cone Making & other Aluminum & Steel Fabrication, Marine & Ship Building, Pressure Vassals, Wind Mills Technical Features : Bottom roll are fixed and driven by Gears and warm Reduction Gear Box. Top Roll rotates in fixed positions and can be adjusted up & down manually by adjustable screws. Housing are made from M.S. Plate of suitable strength and mounted on heavy base frame. Rolls are made from forged steel and perfectly machined for accurate result. For longer life and smooth working of machine, Gun Metal Bushes are provide and given sufficient lubrication system. Bending Process: Place the Plate between bottom and top rolls by adjusting top roll manually. Down the top roll and give pressure on the plate. Then start Main motor in clock wise direction till one end of the plate comes over first bottom roll reverse the motors and get second end on second bottom. Continue above process until you et desired as shown in picture.  

Lower Rolls Powered & Knurled for optimal Traction.

Mechanical Plate Bending Machine is another range of machines offered by us. These are offered with pneumatically operated multi disc and friction clutches that have a mechanical over crank. Its sophisticated design ensures consistent production accuracy and faster operations. Our range offers excellent performance and high durability and can be availed at industry leading rates

• Weight: 345 kg
• Operation: Automatic (Brake motor)
• Motor power: 2.2 KW(3 HP)
• Motor speed: 1440 R/min
• Disk speed: 12 R/min
• Dimensions(mm): 850X820X850

Functions and Usage of New Age Bar Bending Machine Our Bar Bending Machine adopts the fully enclosed GEAR BOX separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine. Gears, Gear shafts, working disk, Stop gauge, Saddles, pile Heads and Pile head bushes made of high-quality alloyed stell with proper heat treatment (quenching/tempering/high frequency) and 3mm thick external case to ensure high performances also under heavy loads and long working life. Dust proof Brake motor and two limit switch to ensure the accuracy of the bending angle also after stopping and restarting. lnsert - pin type disk and movable saddles for a precise adjusting of the bending angle.

This Gold Silver Platinum Coin Bars Minting Embossing Press Machine is a steel fabricated body hydraulically operated C Type 40 Ton Hydraulic Press Machine. 40 tons press specially designed for minting gold and silver coins bars and medals. This is an upstroke coining press with higher ram travel speed and with extra hydraulic cylinder for return stroke to increase the production. The coin minting press is equipped with hydraulic power pack consisting of piston pump, electric control panel board operated directional control valve, relief valve, pressure gouge and standard hydraulic accessories. Automatic Option Also available.

• Max Bending Radius: 50-100 mm, 100-150 mm, 150-200 mm, 200-250 mm
• Power: Hydraulic
• Condition: New
• Automatic Grade: Automatic
• Diameter of Side Roller: 85 mm
• Weitht: 275 kg
• Motor Power: 5 kW

Hydrulic jack components, Spacer

we are offering bending machine. features :- * 3 roll pyramid type design * bending rolls are made from alloy gear box * top roll adjustment is manually set by screw jack * the robust welded structure is made from mild steel plates * high quality durable worm gear box * bottom rolls are power driven * manual end dropper arrangement standard accessories :- * main motor drive * electric control panel with movable operation console (not included in some basic models) * ruler for top roll movement & level * manual centralized lubrication system * 2 nos. screw drive road * nut spanner optional accessories :- * automatic lubrication system * hardened roll * hydraulic jack & power pack for top roll * digital readout system * extended roll shafts for profile bending * conical bending arrangement

Hydraulic Equipment, industrial bending machines

tradle shearing machine, hacksaw cutting machine, thread milling machine

bending Machines, Rajesh C-Frame Power Press, cross shaft

Rolling Shutter, roll forming machinery, Slitting Machine

two wheeler accessories