Filter Press Dealers in Rajkot

• size: 36"

Used 36" size C I - cast iron filter press with total 30 nos. casting plates center feeding type, manual type closing structure used in edible oil for sale

The Sparkler Filter Press  is a sparkler type and consist of S.S. Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley.  STANDARD FLOW TYPE : The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper.fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance. •  Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C•  M.S / S.S. Jacket can be provided for hot filtration .•  Gives crystal clear filtration by filtering particles up to 1 micron size.•  Scavenger arrangement to remove all the liquid.•  Cake can be dried either by compressed air or by insert gas, steam.•  Filtration rates from 600 Ltrs/hr. to 30000 Ltrs/hr possible depending on the models.•  Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.•  Sample collecting device & safety valve provided.

This type of presses are liquid /solid separation devices that utilize feed pressure to squeeze pressure to reduce the liquid content in process.   High-pressure filtration with low moisture content Powerful and effective filter cloth Unique plate shifting and cloth washing system Corrosion resistance filter plates Full- Semi- Manual operation Power saving, free trouble, low operational and maintenance cost  

This filter press is offered for filtration of solids from liquid in comparatively higher batch sizes. The Press can be precisely sized for the required filtration area and cake holding capacity. It finds application in pre-filtration of sterile products, syrups, beverages etc. It is available in plate sizes of 20 x 20, 40 x 40, 60 x 60 cms. Size 60 x 60 cms is common in Beverages industry for the filtration of Sugar Syrup of higher brix value. It is provided with Hydraulic Power Pack as a closing device for units having higher filtration area. Unlike the horizontal plate filter press, these units can be used for reduced filtration area by removing a few number of plates. In certain cases a blockage plate can help to meet unwarranted conditions. Another distinct advantage is the usage of the “by-pass” plate which facilitates two-step filtration, e.g. 10 microns followed by 5 microns.

Used in micro irrigation systems to remove sand and silt particles from irrigation water.   Features and Specifications Mild steel construction. Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects. Hydrodynamically designed to create maximum centrifugal action to separate particles heavier than water Efficiently removes fine sand and silt particles of size higher than 75 microns and specific gravity more than 2.65. Special protection plate are provided at the bottom of the cone to prevent wearing. Large volume of dirt collection chamber increases flushing interval. Dirt can be easily flushed out through dirt collection chamber. Available in maximum operating pressure of 10 kg/cm² (142 psi). Standard end connections are BSP flanged. Please specify for other end connections. (ANSI flanged or Easy-Fix™). Recommended to install before media/screen filters to remove particles heavier than water. Improves operational efficiency & life of media / screen filters. Can also be supplied in stainless steel as a special order. Can be supplied in higher flow capacities in multiple batteries option.

• Application: Clay particle separator filter for Drip/sprinkler Irrigation Systems
• Range: 20 and 25M³/Hr(2”), 40M³/Hr(3”), and 50 M³/Hr (3” & 4”)
• Standards: AS per IS 14743

We offer filter press. Filter press is used for all kind of filtration, clarification of liquids and collection of precipitates or solids.

• Brand Name: Charul Polymer
• Automatic Grade: Automatic
• Features: Easy to operate, Long functional life
• Max Pressure: 15 Mpa
• No Of Plates: 30-40
• Body Material: Cast Iron
• Filter Area (square meter): 400-500 square meter
• Filter Press Size: 36" x 36"
• Structure: Motorized Hydraulic
• Minimum Filtration Capacity: 2000 litre/hr
• Maximum Filtration Capacity: 3000 litre/hr

• Material: Mild Steel
• Corrosion Resistance: Yes
• Country of Origin: Made in India
• Brand: Rapid
• Usage/Application: For Sandblasting Machine
• Filtration Grade: Medium Filter
• Filter Type: Air Line Filter
• Efficiency: 98 %

We are offering filter press. The liquid to be filtered is pumped into the press through a centre hole and it fills the space between each pair of filter cloth, and passes through the cloth into the grooves and further to the outlet hole at the bottom of the plate. * gun metal pet cocks are fitted in the holes of the plates. A tray is provided under the cocks for collection of filtered liquids. * aum filter press is useful to chemical and oil industries for filtration of liquids. It consists of a series of chambers.

We are engaged offering precision engineered range of Sparkler Filter. Designed with international quality standards & made with finest quality raw materials produced from certified vendors of the market. Offer these products as per clients requirements at industry leading prices.

dustpan mill, Muller, Attritor, pulleys & couplings, Pugmill, Mixers

UPVC Tube, Plastic Polymer Pipes, sprinkler nozzle, PVC Male Adaptor