Flange Assembly Dealers

• Stem Length: Up to 600 mm
• Sheath Material: IN-600, Ss310, Ss316
• Female Entry Thread: 1/4", 1/2", 1" BSP
• Stem Diameter: Up to 32 mm

• Brand Name: Flowtech Instruments Services

We are offering orifice plates and flange assemblies. Description : flowtech make orifice plates & flange assemblies. suitable for creating differential pressure in a pipe line for flow transmitter etc. orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets. Available in ss-316/p.p.material. Design standard confirm to bs 1042 fowtech make orifice flange assemblies are used for measuring flow of various liquids, gases & steam from 1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘differential pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity. design standards design - confirming to isa rp 3.2, dn 1952, bs 1042, iso-5167 orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3 accuracy - within +/- 1 % vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25.4 mm.

“kabir” make orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or steam. The orifice plates are designed as per bs1042-1981 iso 5167 & kabir standards. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used.

• Brand Name: Nada Poly Plast,Nada Poly Plast
• Surface Finishing: Polished
• Color: Black,Black
• Size: Standard, Customize,100MM, 105MM, 113MM, 108MM
• Type: Circular Loom Parts
• Country of Origin: India

Side Flange Assembly Black fpr circular looms available in any size

• Type: Bar Accessories
• Brand Name: Aluids
• Material: Brass, Brass
• Finish: Polished Chrome
• Port: Nhava Sheva,Mumbai
• Place of Origin: Punjab, India
• Supply Ability: 100 Piece/Pieces per Month

• Brand Name: Nupros Inc

Our organization deals in manufacturing, exporting and supplying of Insulating Flange Assembly that follows same working principle, but it is a bolted joint. The kits of these Insulating Flange Assemblies are manufactured from 14 nb to 100 nb. These Insulating Flange Assemblies are designed and manufactured to get 100% electrical insulation of flanged joints, cathodic protected separators, heater treaters and process piping connection. Each kit consists of insulating gasket, full length insulating sleeves, two insulating washers and two steel washers for each bolt. The purpose of insulating sleeves is to electrically separate the bolts and the insulating washers to provide electrical insulation for each of the nuts. This method of insulation provides high-reliability solution to complete the electrical insulation of flanged joint of vessels and piping.

• Material: Steel
• Color: Silver
• Condition: New
• Application: Automobile Industry
• Feature: Accurate Dimension, Fine Finish
• Type: Flange Cross Holder Assembly
• Country of Origin: India
• Shape: Round
• Diameter: 86mm to 203mm
• MOC: EN8

The Weld Neck Flange is normally referred to as "High Hub" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The pressure tappings are provided through the flange which are at a distance of 1" from the face of the plate. The Plate Holder Assembly is a combination of plate holder and an Orifice Plate designed for Ring Tongue Joint (RTJ) Flanges. The plate holder has a function of holding the Orifice Plate and also function as a gasket to prevent leakage of the process fluid. The plate holder has an oval or octagonal ring for mounting between ring type joint flanges. This metallic sealing system is useful for a fluid of high temperature and high pressure. The pressure tapping system normally is of the flange tap type.

The CF flange (originally called ConFlat) is a sexless design where both flanges are identical. Typical flange materials are austenitic stainless steel types 304L, 316L, 316LN, and surface hardened aluminum (made from a weldable Al alloy). The seal mechanism is a knife-edge that is machined below the flange's flat surface. As the bolts of a flange-pair are tightened, the knife-edges make annular grooves on each side of a soft metal gasket. The extruded metal fills all the machining marks and surface defects in the flange, yielding a leak-tight seal (Figure 1). The CF seal operates from 760 Torr (1013 mbar) to < 1 x 10-13 Torr (

We are offering vee flange assembly. Vee flange assembly offered by us is sub assembly that finds usage in collapsible column of sports utility vehicles (suv’s). Supplied in unassembled conditions, this component is part of steering components and is presently being used in land rover (u.k.). Our rich industry and process experience allow us to offer these v-band couplings in different configurations as well as latch styles. Some of the areas these find application in include in joining:

The orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or vapours. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used.

We are a prominent Orifice Flange Assembly Manufacturer, Exporter and Supplier from India. Used in the measurement of flow for liquids, gases and steam. The Orifice Flange Assembly operates on the principle of Differential Pressure, which is created due to increased fluid velocity leading to obstructed fluid flow. The Assembly Comprises : Orifice PlateOrifice FlangeCarrier Ring AssemblyD.P. Transmitter Availability : 1 ½� to 24� line sizes Why our Orifice Flange Assembly ? Measures to give acceptable uncertainty levelDurableLow maintenanceCost-effective Application Areas : Petrochemical plantsFertilizer plantsOil and gas industryDye industryPaper and pulp industryHeavy chemical plantsSugar industryPharmaceutical industry

Orifice Flange Assemblies are supplied ready to install in pipelines complete with Studs, Nuts, Jack Bolts, Gaskets and Drain Plugs. Orifice Flanges are manufactured in broad variety of materials to ASTM Standards viz.  

ORIFICE PLATE FLANGE ASSEMBLY Orifice Plate Flange Assembly is used for measuring the rate of flow or quantity of fluids like liquids, gases or vapors Orifice Plate is designed as per BS 1042 / ISO 5167 & L.K Spink standards.

Orifice Flange assembly is a primary flow element consisting of a tab handled square edged orifice plate and optional carrier. The orifice plate is designed and manufactured to meet the requirements in all respects and is suitable for the measurement of the rate of flow most liquids, gases and steam

MODELS:• Orifice Plates• Restriction Orifice Plates• Orifice Flange Assembly – Orifice Plate with weld neck Flange Union / Slip on Flange Union• Orifice Plate with Carrier Ring• Integral Orifice Assembly • Vent / Drain holes are provided as per customers requirement• Types: Square Edge Concentric, Quadrant Edge, Conical Entrance , Eccentric,Segmenta

• Line Size: 15 NB – 1500 NB (1/2” – 60”)
• Material: AISI 316, AISI 304, Monel, Hastelloy C
• Plate Types: Concentric square edge, Quarter of circle, Conical entrance, Segmental, Restriction, Eccentric
• Flange Type: Orifice Flanges (WNRF, WNRTJ, SORF, SWRF, Threaded)

STAR-MECH provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in the process industries. Apart from the materials mentioned any other material can be supplied on request. Products with IBR / NIBR option are available. An orifice plate assembly is a most widely used flow measurement product. STAR-MECH orifice plates are manufactured from finest material with close tolerance to match standards ISO 5167, BS 1042, API 2530 & AGA Report 3. Mounting between flanges or carrier ring(s) are available. The orifice plate assembly provides accurate measurement with no maintenance.

Ours is the noted name involved in providing excellent support in transaction ensuring complete security of the payment. We undertake both online and offline payment processing methods. Founded in Punjab(India), the company has garnered wide appreciation for its seamless quality products and client centric approach.

  Orifice Flange Assembly To measure differential pressure across the Orifice Plate, By-pass type flow measurement/ DP flow transmitters. Standard : According to ISO - 5167-2:2003 / BS 1042 Type : Socket weld / Weld neck type Size / MOC / Range : As per customer requirement.  

• Packaging Details: As per the buyers specification
• Model Number: NA
• Brand Name: VINAYAK TRADING
• Port: Mumbai
• Supply Ability: 500 Piece/Pieces per Month

• Material: Stainless Steel
• Size: 600 NB
• Packaging Type: Box
• Application: Industrial
• Country of Origin: Made in India
• Shape: Round
• Accuracy: 1/2 to 1%
• Surface Finish: Polished
• Brand: Veksler
• Features: Excellent strength, Easy installation

Very nominal cost compared to other flow elements, First Principle Device - Which never Fails, Proven Solution for Flow Measurement, Suitable for All Pipe Sizes from 12’’ to 36’’ .

• Size: 2" to 24" Diameter

The orifice plate is an essential component used to generate a specific, predictable pressure drop in the system. The orifice plate with flange assemblies are used for measuring the rate of flow or quantity of moving liquids, gases or vapors. The orifice plates are designed as per international standards. The orifice plate portion of the assembly is made of SS 316 & 3.16 mm thickness.

flange-mounted motors have gained a reputation as tried-and-tested machine components. As drive assemblies for tools and special machinery, they prove their quality and reliability under the toughest conditions on a daily basis. The convincing technical machine concept pursued by  and the wide variety of designs permit every conceivable modification and adaptation to customised specifications. Depending on the respective designated use, our specialists collaborate with the customer to find the most suitable drive variant. All that remains for the appropriate  flange-mounted motor is to be mounted onto the gearing or control gear to be powered, whereby internal wiring is already performed ready for installation. Flange-mounted motors range from 180W to 25OOW rated output.

Available on Large Pipe Line Size of 1”NB to 24" NB Wetted Parts in M.S., S.S.304, S.S.316, Polypropylene etc.. Orifice Bore Calculation As per ISO 5167 Accuracy of ± 2% FSD.

• Diameter: 100 mm
• Shape: Round
• Color: White and Black
•  :  
• Pack Type: Box

Orifice Flange Assemblies Plate Designed as per BS Standards 1042 part 1964 on IS Standards, Flanged are available as per customer’s Specifications: Orific plate along with Flanges are suitable for installation in 50 NB and above pipe lines sizes and can be provided in wide on Material. We are one of the leading manufacturer of Orifice Flange Assemblies, supplier of Orifice Flange Assemblies, exporter of Orifice Flange Assemblies.