Gas Valves Dealers in Lodhika, Rajkot

• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 50-100mm
• Material: Carbon Steel, Forged Steel, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Weight: 10-20kg
• Color: Black, White
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting
• Type: Three Piece Ball Valve
• Condition: New
• Pressure: High, Low, Medium

• End Connection: Screwed
• Body Material: Aluminum Pressure Die Cast
• Media Temp: -10° C to 60° C
• Diapharagm: Nitrile (NBR)
• Circumstance Temp: -30° C to 70° C
• Media: Air, Natural Gas, Town Gas
• Main Features: Flow adjustment, Opening time adjustment, Quick release initial flow adjustment
• Coil Features: High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require
• Note: Use of filter in the inlet port is recommended. Coils are conforming as per IEC-60335-1 with derivatives (LVD / EMC). Gas Solenoid Valve complies as per EN-161 requirement.
• Coil Housing: Epoxy square coil.

• Brand Name: NOVA

we are proficient manufacturers and suppliers of 1 piece socket weld ends ball valves. These are fabricated using the best quality raw material, sourced from the market trusted vendors. We ensure that the valves offered by us must comply with the norms set in the industry and deliver lasting performance. Some of the key details of our products include:

• Design & Manufacture: BS 5351 / API 6D/ANSI B16:34
• Body & Trim: Nace MR 01-75
• Casting Inspection: MSS SP-53, 55, 59, 94
• Testing: BS 6755 Part-I / API 598
• SW END: MSS SP-45 / API 6D

Ball valves shall have a spherical ball that moves in a plane perpendicular to the direction of flow. Full opening through ball valves shall have a circular bore in the spherical ball that allows a sphere to pass with a nominal size not less than ½" nominal diameter. Reduce opening through Ball valve shall have a semi circular bore in the spherical ball that allows a phere to pass with a nominal size not less than 10" nominal diameter, Unless otherwise specified by customer.Reduce opening valves with a non circular opening through the spherical ball shall be supplied with a minimum opening as agreed by customer. Pressure & Temperature Rating Valves manufactured by Reliable Valves shall be furnished in one of the following classes- PN 20 (class 150)- PN 50 (class 300)- PN 64 (class 400)- PN 100 (class 600)- PN 150 (class 900); - PN 250 (class 1500)- PN 420 (class 2500);Pressure-temperature rate is for above class rated valves shall be in accordance to ASME-B 16.34/EN 1092-1, Other than shall be determine for a material properties in accordance with the applicable design standard. Size Reliable Valves manufacture Ball valves for ½" to 60" Size   Design Features Anti-Static Device & Blowout ProofAnti-static device is formed through metal to metal contact, The stem is grounded against body and ball by separate anti-static spring to avoid from any electric spark. The blow out proof over size stem operate the valve safety even at high differential pressure. A bottom stem seal enabling replacement of gland packing even when valve may under pressure. Double Block & BleedSpring loaded floating seats maintain contact with the ball and provide tight shut off even at low pressure differential. Independent sealing of upstream and downstream sides facilitates draining of fluid from the body cavity, and thus the double block and bleed operation. Double Body SealingDouble seal combination of O-Ring and spiral wound gasket ensures perfect body joint sealing. Reliable Valves therefore meet or exceed the fugitive emission requirements across wide range of pressure and temperature applications. Valves are suitable for both above and underground installations. Multiple Stem SealingA triple sealing arrangement in stem area prevents leakage to atmosphere. It includes double sealing with O-rings and graphite seal at the top of stem housing. The blow out of proof stem enables positive stem retention. Sealant System & LubricantBall valve of size 6” & above shall be provided and emergency sealant injection system if required by customer. The lubricant & sealant fittings are located near seat area & at stem neck. The lubricant sealant entered via inject fitting & pass around the seat ring. The lubricant will lower the torque in valve & sealant will provide sealing for minor damage such as scratches on seal faces.Fire Safe DesignIn the event the fire soft insert gets burnt & spring loaded seats ensure metal to metal sealing.Corrosion Protection & PaintingAll castings are sand blasted & are subject to dewatering oil coats. Valves are thoroughly cleaned & primer coated with epoxy zinc phosphate primer, Followed by final coat of epoxy synthetic enamel applied in semi gloss finish.

Size: 15 mm to 250 mm, class: upto 800# trunion mounted as well as floating type designs avaiable along with 3.1 or 3.2 certification.

• Material: Aluminium
• Country of Origin: Made in India
• Usage/Application: Gas
• Valve Size: 1 Inches
• Model Name/Number: DAN
• Brand: Uflow
• Type Of Coil Protection: H Class
• Coil Voltage: 24 V
• Protection Class: IP67
• Switching Frequency: 50 Hz

• Material: UPVC, CPVC < SWR
• Brand Name: Marcos

We are offering ball valves.

Pvc Flexible Hose Pipe, PVC Suction Hose Pipe, pvc pvc compressor pipe

Investment Casting, ferrous, Non Ferrous Investment Casting, Pump Spare

Investment Casting

Air Valves

cylinder valve, Valve Guides

Industrial Valve, Stainless Steel Disc Butterfly Valve

Flanges, Gears, end piece, elbow tee

Investment Casting, ferrous investment casting, Non Ferrous Investment Casting