Hydraulic Presses Dealers in Samrat Industrial Area, Rajkot

Drying : The material used in the briquetting plant must have moisture content less than 10%, if the moisture content is higher, you need to remove the excess moisture from the material by using the biomass material drying machine. Crushing : If the size of the raw material is larger than 200 mm, briquetting plant demands to convert into smaller pieces between 3-5mm. The biomass material crusher is used to prepare suitable size raw material for the biomass briquetting plant. The selection of the crushing machine is solely depending upon the size of the raw material. To get the support and solution concerned with crushing machine, contact us. Screening : Screening process taken under consideration after the completion of crushing process, in which the improperly sized raw material gets eliminated. The screening process is must to prevent hazardous failure of the machine and deliver the supreme quality briquettes as an end product. Briquetting : After the assurance of perfect moisture, perfect size and perfect crushing, briquetting process take place, in which biomass briquette press operates under high pressure and high temperature to compress the biomass material into small, medium or large sized bricks. The material continuously feed to the plant, once the temperature of the machine set to 300 °C. The size of the briquettes depends upon the selection of briquetting plant.

• Weight: 120 kg.
• Brand Name: Banka
• Capacity: 5 (ton/hr)
• Color: Yellow / Blue & Off white
• Control Type: Power operated
• Stroke in Power Operate: 100 mm
• Electric Motor: 0.5 Hp

Cement Tiles Machine Construction : Fabricated M.S. Plates Steel Body Piston is Hard Chrome Wiper on Cylinder Top Production Capacity : 1200 Pcs per shift Mfgrs. : Cement Tiles, Chequered Tiles, Galicha Tiles, Elevation Wall Tiles Mfg. Capacity : Size of Tiles upto 375 mm x 375 mm Machine Size : 95 cm x 65 cm x 170 cm

Briquetting Press Machine is used in the process of recycling for steel turnings, direct Iron borings, copper or brass powder etc. We create sure that our machines feel firm and tough inquiry processes to supply quality Briquetting Machines to valued clients. The accuracy engineered machine is manufactured in agreement to the international quality values and facilitates high performance.

Being a reliable name in this arena, we make sure that the payment procedures remain secured with us. In addition, we issue invoice to the clients stating all the relevant information of the products. We have an association with respected vendors from whom we source the raw inputs at very affordable charges. Additionally, the inputs are stringently checked before procurement.

• Travel of Ram Power Operated: 100,150, 175
• Distance Between Ram to Bed in MM: 100 x 500,150 x 700

USES & APPLICATION :Electic Motor, Submersible Pump, Ball Bearing Factory, Reparing Workshop, Auto Service Station & Industrial Work, Like Pressubg, Bedning, Straightning, Embossing, Broaching of Steel, Iron, Plastic, Rubber Etc.FRAME :Column and Bottom are Fabricated from Heavy Mild Steel. The working table is operated vertically and Adjusted by worm winch. Rollers are provided easy Heavy work.CYLINDER :Hydraulic Cylinder is made out of Seamless pipe with Accurate Boaring, Grinding, Honing and Piston from special Rigid Steel with the same Accuracy with U-Cups Chevron Packing and Rubber O-Ring Etc. Socket is provided for DIA-PUNCH work.

• Usage: For Metal Sheet
• Weight: 100-200kg
• Voltage: 110V
• Operating Mode: Semi Automatic
• Power: 1-3kw
• Warranty: 1year

• Type: Hydraulic Press Brake Machine
• Application: Bending Sheet
• Certification: ISO 9001:2008
• Color: Grey, White
• Voltage: 1-3kw, 3-6kw
• Condition: New
• Power: 220V, 440V
• Warranty: 1year
• Brand Name: JAYSON
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Driven Type: Hydraulic
• Raw Material: STEEL

• Wax Tube: 6Kg
• Maximum Extrusion: 75mm x 75mm Runner
• Extrusion Pressure: 15 Ton capacity
• Extrusion Nozzle: 800mm from floor Height
• Pump: Gear Pump
• Hydraulic pressure: Capacity 100 Kg/cm2

Hydraulic Ram Pressing a Wax Billet against a Heated Die which in turn produces Extruded Wax Shapes. Hydraulic Force for Extrusion is 15 T.

• Range: 80T to 600T in Length 2000mm to 6000mm version NC & CNC

One of most important sheet metal forming machinery mainly used to bend sheet plate in different angles. Products like bus & truck body building, electric panel, solar panel, door & window frame and many more.

• Certification: CE Certified
• Warranty: 1year
• Voltage: 400/440 volts
• Power: 3 phase
• No. of cycles: 50 cycles
• Material: Metal

The Mechanical Press Brake Machine is of robust fabricated steel construction of rigid and interlocked design. It is strain free and supports the ram and bed against undesired deflection under permissible loading condition. Made from steel plates of suitable thickness and machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guide ways. Power is transmitted through two individual gear drives for uniform load distribution throughout the length. We are known as one of the best Press Brakes Manufacturer and not only this we have achieved success through our out of the world machines so we have become one of the most eminent Hydraulic Press Brake Supplier in India. Features Foot pedal and die block linking link Fly wheel and gear guard Self lubrication system Motor pulley stroke counter Motor mounting bracket Details All dimensions are in mm Power supply 400/440 volts, 3 phase, 50 cycles We reserve the rights to alter specifications without notice Stringent quality checks for easy and smooth operation Options Mounted black gauge Self lubrication Motor mounting bracket Motor pulley

• Brand Name: shailesh/kawa
• 20ton to 800tons: 1250mm to 6000mm

We are offering press brake. mechanical, hydralulic, pnumatic, nc and cnc front cylinder as well as rear cylinder type.

• Power supply: 400/440 volts, 3 phase, 50 cycles

our hydraulic press brake are designed and developed through years of experience in sheet metal working machineries. These are developed by keeping latest technology in mind. Both cylinders are mounted on backside of press brake and are synchronized for parallels between ram and table, by providing mechanical links with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks o0f overload. All welding are properly machined for best weld joints. The electric control panel is fixed on side at conventional; place for easy reach of operator. It includes foot button pendant and foot switch. Standard v block and v punch are manually operated black gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like videkers, rexorth etc. We have become due to our premium quality products one of the leading nc press brake manufacturers in india. We have also created a reputation in the hearts of our customers as the finest mechanical press brake exporters in india.

Iron Worker Machine that we manufacture and supply is widely used for easy cutting & bending applications that includes angle cutting, channel cutting, flat cutting, notching, etc. Our Iron Worker Machine features user-friendly electric control panel along with a pair of foot switch for simple operation. We offer manual or hydraulic job clamping device along with our Iron Worker Machine. Furthermore, we offer Iron Worker Machine at the most competitive rates.   Standard Features   Blade for angle cutting, channel cutting (any one size), Flat cutting & Notching Fine Stroke Adjustment Rod with limit switch Manual / Hydraulic job clamping device Electric control panel Pair of Foot switch Main Drive Motor   Optional Features :   Blade for Round bar, square bar cutting, 'I' – Bim, Section Cutting Any type of punching notching & bending die First fill of Hydraulic oil Main back gauge  

To meet the industry demands, we have come up with our range of Ironworker Machine that has been engineered using superlative quality of raw material, under the supervision of experts. Our prestigious customers appreciate this Ironworker Machine for its high performance and sturdy design. It comes with two control foot paddles that offer safe and comfortable functioning of Ironwork Machine. We are the most reliable Manufacturer and Supplier of Ironworker Machine in Rajkot, Gujarat, offering their product at an affordable price.

Our Heavy Duty Hand Press Brake Machines are made from M.S. Material and Mainly useful for any kind of Steel Furniture Industries. It is useful for Half Round and Right Angel Bending. Side Walls: Made from mild steel plate. Vertical and Horizontal supports are provided for more strength. Screws: Made from mild steel with square thick threads. Upper Beam: Made from Heavy Steel Plate. All surfaces are well surfaced to get accuracy. V-Block:Provided with 5 grooves for various sizes of job. Knife: Made from mild steel and sharpened up to 20o after sufficient machining.

  FRAME : The Frame is Fabricated From Steel Plates Heavy Wide And Cross Rib Borders. CLUTH : The Clutch is Round Key Type With Single And Continuous Strokes System. The Key And Cluth Ring is Made Of EN 31 Steel And its Parts Are Tempered. GEARS : Gears Are Of Steel Cast Fabrication.Gear Teeth Are Genereated By Precision Hobbing Machine. CRANK SHAFT : Crank Shaft is Made Of A Very Special Alloy Steel It Moves Very Easily In/Gun Metal Buses. TABLE & RAM : Table And Ram Are Made Of High Grade Heavy Duty Cast Iron & Property Seasoned. They Are Perfectly Aligned To Each Other To High Accuracy & precision Press Operation.  

• Material: Iron
• IS It Customised: Yes

We are offering H Type Hydraulic Press , WELDOR: H TYPE HYDRAULIC PRESS WITH DIE CUSHION CUM EJECTOR ARRANGEMENT WITH ELECTRICALS BUT WITHOUT HYDRAULIC OIL: H TYPE HYDRAULIC PRESS : Technical Specifications: Cap 500 ton Table Size LH 3000 mm x FB 1500 mm Stroke length 600 mm Open height 1000 mm Closed height 500 mm Ram size LH 3000 mm x FB 1200 mm Nos.of cylinders (main) 3 Die cushion cylinder cap. 200 tons Nos.of die cushion cylinders 3

Approx price: rs 5 lakh unit product details: max sheet width 1 meter, 2 meter, 3 meter, 4 meter, 5 meter, >5 meter automatic grade automatic , semi-automatic, manual control type cnc, non-cnc cutting load 0-30 ton, 30-60 ton, 60-90 ton, 90-120 ton, 120-150 ton, >150 ton we have in store a remarkable gamut of pneumatic press brake for our clients. Developed using premium quality stainless steel, brass and others these offered products conform to the defined parameters of the industry. Our clients can avail the offered products in different sizes and specifications as per their requirements from us.

With a vision to not only just manufacture but also to supply steel fabricated machinery and hydraulic press leveraging the best of quality Main Ram Capacity In Ton : 100, 200, 300 Blank Holder Capacity In Ton : 40, 100, 120 Main Ram Stroke In mm : 450, 750

Capacity : 250 Tone

We are a trusted supplier of Press Brake Machine, providing the lucrative deals to the widespread customers at easy terms. To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically.   Product Details : Machine Type - Lathe Machine,Milling Machine,Drilling Machine,Boring Machine Operation Mode - Semi Automatic Service Location - Any Where in India   Approx Price : Rs 3,000 / Piece

• Capacity: 5 to 200 ton
• Material: Mild Steel
• Usage/Application: Industrial
• Load: 30-60 Ton
• Power Source: Hydraulic
• Automation Grade: Automatic

Hydraulic Coin Bar Blanking Cutting Machine. This Gold Silver Platinum Coin Bars Minting Embossing Press Machine is a steel fabricated body hydraulically operated 40 tons press specially designed for minting gold and silver coins bars and medals. This is an upstroke coining press with higher ram travel speed and with extra hydraulic cylinder for return stroke to increase the production. The coin minting press is equipped with hydraulic power pack consisting of piston pump, electric control panel board operated directional control valve, relief valve, pressure gouge and standard hydraulic accessories. Automatic Option Also available.

Power Presses are coming in both C frame and Pillar type versions from 3 tons to 250 tons capacity in most economical type of construction with several stdoptional features such as manualauto lubrication. systems; knockouts electronics hand safety; singledouble or un-geared versions as also pneumatic feeders straightness and de-coilers for automation Purpose.

• Weight: 000 Kg
• Voltage: 580 V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Semi
• Power: 25-50 Kw
• Usage: Rubber Mouling Parts
• Table Size: 1000x1000 mm , 1500x1500 mm , 2000x2000 mm

The Mechanical Press Brake Machine is of robust fabricated steel construction of rigid and interlocked design. It is strain free and supports the ram and bed against undesired deflection under permissible loading condition. Made from steel plates of suitable thickness and machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guide ways. Power is transmitted through two individual gear drives for uniform load distribution throughout the length. We are known as one of the best Press Brakes Manufacturer and not only this we have achieved success through our out of the world machines so we have become one of the most eminent Hydraulic Press Brake Supplier in India.

• Capacity: Size of Tiles up to- 375mm x 375mm
• Constructions: Fabricated M.S Steel Body Piston is Hard Crom Wiper onCylinderTop
• Production Capacity: 1200 per Shift