Hydrocyclone Dealers in Rajkot

• Brand: Misri
• Country of Origin: India
• Color: Yellow

Sand washing consists of a separation by size of the unwanted particles. The separation is made at a size of 65 microns, where fines and clays are concentrated that reduce the quality of the sand. Although this cut size is adjustable.   Feed the sand to a receiving tank, adding the necessary water to wash previously. Well in the previous screen or in the own conduit of feeding to the tank.   From this tank, a pulp composed of dirty sand and water, in the proper proportion, is pumped to cyclone. In which, in a controlled way, a separation of the fines from the sand is made, which are eliminated as dirty water to the water recovery system.   While the clean sand that exits the apex of the cyclone is sent to a dewatering screen. At the exit of which the sand is obtained clean and with low percentage of water.

Hydrocyclone is used to separate or sort particles in liquid with different densities of the particles and may be used to separate liquids from solids. Hydrocyclone can also be used to separate liquids of different density. B. M. Industries manufactures, exports, and supplies the best quality Hydrocyclone. Our Hydrocyclones are widely appreciated for their high performance and longer service life. Construction and Working : A Hydrocyclone has a cylindrical section at the top where liquid is being fed, and a base. The angle, and hence length of the conical section, plays a role in determining operating characteristics. It has two exits on the axis: the smaller on the bottom (underflow or reject) and a larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction. Internally, centrifugal force is countered by the resistance of the liquid, with the effect that larger or denser particles are transported to the wall for eventual exit at the reject side with a limited amount of liquid, while the finest, or less dense particles, remain in the liquid and exit through the overflow side through a tube extending slightly into the body of the cyclone at the center. Forward Hydrocyclone remove particles that are denser than the surrounding fluid, while reverse hydro cyclones remove particles that are less dense than the surrounding fluid. In a reverse Hydro Cyclone the overflow is at the apex and the underflow at the base.