Industrial Pump Dealers in Mavdi, Rajkot

• Brand Name: Ankita Pump

We are leading manufacturer & exporter of horizontal open well submersible pump (agriculture) in india. We offer good quality submersible pumps for various purposes. The best part of these pumps is the easily rewind able. These pumps are highly efficient and durable. With a compact built, these pumps can be used for domestic, agricultural as well as commercial purposes. Terms and condition : rate are f.o.r. Rajkot gujarat state sales tax will be charged extra this price is subject to change without prior notice for out state sale c.s.t. 4% will be changed against “c” from document will be negotiated through nationalized banks subject to rajkot jurisdiction note : all the above performance are based on power supply 230 volt for single phase and 415 volt three phase at 50 hz *result may very by 50% depend upon site situation

Double Displacement Hydraulic Hand Pump with two separate handles: One for high flow low pressure & Another for low flow high pressure HIGH FLOW DISPLACEMENT- 100 CC/STROKE & PRE.UPTO 50 KG/SQ.CM LOW FLOW DISPLACEMENT- 20 CC/STROKE & PRE.UPTO 300 KG/SQ.CM OIL TANK- 8 LTR. APPLICATIONS- HAND OPERATED HYDRAULIC PRESSES, LIFTING JACKS, etc.

Buyers can rely on us for on-time delivery as we are assisted with up-to-date transit and logistics services. Our organization has observed impressive rise as Boiler Feed Pumps supplier, courtesy our ability to fulfill to wholesale demands without hassle.

• Number Of Stages: Multi Stage Pump
• Motor Horsepower: 5 - 20 HP
• Motor Phase: Single Phase, Three Phase
• Brand: Centuryply
• Power Source: Pump Only
• Maximum Discharge Flow: 100 - 500 LPM, 501-1000 LPM
• Warranty: 6 months, 12 months
• Type: Borewell, Water Filled, Horizontal, Electric, Portable, Solar
• Material of Construction: Metal
• Frequency (Hertz): 50 Hz
• Voltage (Volt): 220 V - 440 V
• Applications: Agriculture
• Condition: New

• Automatic Grade: Automatic

1.0 HP single phase or three phase fully stainless steel horizontal openwell submersible pump set 

Having vast industry experience and expertise, we bring forth feature-packed V9 Submersible Pumps. We are a renowned V9 Submersible Pumps Manufacturer, Exporter and Supplier in Gujarat, India. Made using the latest production techniques, our Stainless Steel Pump Sets are widely used to lift water from bore well.   Sizes & H.P. Available : 250 MM & 60.0 H.P. to 100.0 H.P. Raw Material Used Stainless Steel Cast Iron (FG-250) Copper (EC) Gun Metal (LTB-4) Carbon (Assam) Silicon (M-45,CRNGO) Rubber (Nitrial)   Special Feature : Special design 66 feet headstage. Applications Agricultural Industrial Technical Specifications 66 feet head stage Maximum head up to 1200 feet Maximum Disc 2400 literminute Able to run in 250 to 415 volt in 3   Colors & Packaging Available : Special polymer paint & wooden box

• Type: Triplex
• Certification: CE Certified
• Application: Industrial
• Driven Type: Electric
• Pressure: High Pressure
• Warranty: 1 Year

Emerged as an eminent Supplier, we are well-known for dispatching the comprehensive range of MS Submersible Jota. For the convenience of our clients, we have formed payment terms and conditions that are as per the law and simple. The methods we use are practical, convenient and diverse. We offer high-strength and anti-corrosive MS submersible Jota in various sizes like 1", 1.25", 1.50", 2", 2.5", 3" etc. 

• Material: Abs Plastic
• Packaging Type: Box
• Usage/Application: Kitchen
• Color: White and Red, Green
• Appearance: Modern

Direct coupled and belt driven centrifugal pumps are single stage, radial flow end, suction type with horizontal shaft and vertically split casings. Pumps are fitted with pulleys or with flexible couplings, to be driven by electric motors or diesel engines. Direct coupled pumps are supplied with a common base plate   Salient Features of the Pump: Casing :The volute type casing is scientifically designed to produce a smooth flow, with gradual changes in velocity, ensuring the efficiency of the pump. The casing is made of high grade, close-grained cast iron. Impeller :The impeller is made of high grade, close-grained cast iron, accurately machined on the outside. The interior passages are hand-finished. Supporting Frame : Robust and sturdy, it is designed to accommodate shaft and ball-bearings. A gunmetal sleeve provides rigid support for the pump.Shaft : This is made of special shaft steel. Accurately machined, it is designed to transmit maximum power without vibration. Bearing :Heavy-duty ball-bearings and sleeve-bearings are used to withstand radial/thrust load.Rotation : The standard rotation of the pump is anti-clockwise when viewed from the driving end. This makes it suitable for direct coupling to the engine.

Customers can obtain their orders in customized packaging from us. We use only premium quality material for the packing of the products ensuring zero damage to the orders during transit. We have trustworthy and well-organized shipping facilities available, along with this, we keep a record of the same as well, and this increases our efficiency and gains the trust of the customers.

• Price: Rs 2,050 / Piece
• MOQ: 20 Piece

in order to deliver consistent quality products, we keep our vigil eyes on product development, storage and final dispatch. Quality packing material and advanced machines are responsible for the safe packaging of the orders from our end. Moreover, our experts keep a strict vigil on the entire procedure.   features : corrosion resistance superior strength highly durable

With the endorsement of our adept and seasoned professionals, we are engaged in offering a commendable range of MIni Openwell0.5 to 1 HP. Owing to its features like smooth functioning, long service life, sturdiness and corrosion resistance, it is broadly appreciated and demanded in the market. We use the optimum quality raw components and modernize technology to manufacture the offered range, for increased compliance with set industrial norms.

The Water Pump Parts provided by us are known for their user friendly features. These kits are available to clients at budget friendly market prices in an array of specifications such as size and shape. Features: User friendly kit design Sturdy Long lasting Rust resistant design Faster installation Efficient operation  

CONSTRUCTIONAL FEATURES : (1) Totally enclosed motor with water resistance PVC insulated copper wire winding. (2) Rigid C.IS.S. body painted with anti corrosive lining to prevent rusting. (3) Dynamically balanced rotor with steel shaft & impeller (4) Specially designed double trust bearings. (5) Practically no maintenance required for all bearing bushes which are water lubricated. (6) Graded C.I. Impeller (Closed Type) Designed for High discharge. (7) Lower power consumption(8) Available in C.I. well as Stainless Steel pump.

Diesel Engine Pump Sets Slow speed, Water-Cooled 5 to 20 HP 12 to 20 HP 6 to 14 HP High Speed, Water-Cooled 3 to 18 HP 10 to 25 HP 30 to 45 HP High Speed, Air-Cooled (FTA & BTA) 3 to 10 HP (FTA) 5 to 10 HP (BTA) 10 to 20 HP (FTA) 10 to 20 HP (BTA).

• Brand Name: Karnel
• Cubic Capacity: 624mm
• Material: Cast Iron And Steel
• Type Vertical: TRB
• Power KW: 3.7
• Speed: 1500 RPM

• Brand Name: msv
• with garanty: just like color

We offer an array of v6 submersible pumps at highly competitive market prices. These are designed in a manner that does not need foundation or pump house. The pumps are manufactured using high quality cast iron sourced from leading market vendors. These are also available with water lubricated journal & thrust bearings, dynamically balanced all rotating parts and motors with high voltage fluctuation. Our products are carefully manufactured such that there will be no foot valve, priming or suction problems and lower the possibility of burn-out of motor.

• Color: Blue
• Brand Name: msv

We are offering domestic monoblock pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages.

• Usage/Application: Kitchen
• Packaging Type: Box
• Brand Name: Smita
• Finishing: Polished
• Handle Material: Plastic
• Pipe Material: Stainless Steel

Ideal VLOM (Village Level Operation and Maintenance) design developed keeping in view maintenance problem - can be handled even by women. Capable of lifting water from depth up to-approx 45 Meters. Non-corrosive underground components capable of handling corrosive water situation thereby giving longer life. Light weight uPVC riser pipes; easy installation & inexpensive. Adjustable handle to suit varying installation depths. Inter changeable plunger & foot valves; easy to extract without removing riser pipes. Two options for pedestal design are available: a) Pedestal for concrete stand b) Pedestal of India Mark II design with either3 legs mounting or flange mounting arrangement. U-Seal, bobbins and 'O' ringsare of nitrile rubber and plunger rod of stainless steel. 10 mm dia x 3 Meters long mild steel hot dip galvanized rod with forged eye and hook connectors welded at both ends. This provides easy rod connections without use of any tool. Each rod is provided with a rubber centralizer to replace at village level. uPVC pipe 63 mm OD x 4.7 mm wall x 3 Meters long with socket-spigot cemented joint. Each pipe is provided with a rubber centraliser to avoid contact with casting pipe. Application Data: Min. bore size 100 mm Internal dia of Cylinder 50 mm Stroke length 225 mm Average discharge per stroke 0.44 Ltr. Operating depth upto 45 Mtr. (approx)

All types of Casing, Impeller, Bowl, Diffuser, Open type & close type impellers, front & rear bearing housing. All kind of Pump spares like centrifugal pumps, horizontal & vertical pumps conned motor pumps. Submersible pump parts. Chemical process pump parts. Self priming pump parts. Hygiene pumps & Vacuum Pump parts. Application: Petrochemical / fertilizer / Refinery / starch paper, sugar industries, pharmaceutical & sewage plant etc.

• Brand: well stick
• Usage/Application: HOME
• Material: PLASTIC AND STEEL
• OIL TYPE: ALL
• Size/Dimension: REGULER
• Weight: REGULER
• Packaging Type: bag

We provide a wide range of high efficiency Open Well Pumps that includes Horizontal Open Well Pumps as well as Vertical Open Well Pumps. Today, we are well reckoned as one of the major Manufacturers of Open Well Pumps. Our Open Well Pumps are manufactured from the optimum quality parts as per the national and international quality standards. Open Well Pumps offered by us are ISI marked by BIS. Highly durable, our Open Well Pumps are characterized by low power consumption and maintenance. Open Well Pumps offered by us are perfect for tube well irrigation, lift irrigation, domestic water supply, industrial & public water supply and other purposes.

• Type: Vacuum Pumps
• Certification: ISO 9001:2008
• Application: Agrictulture, Automotive, Industrial, Marine, Power
• Overall Weight: 10-20kg
• Is It Variable Speed: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 0-10 Hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year
• Driven Type: Electric

• Brand Name: Enjoy
• Voltage: 440V
• Motor Horsepower: 2 hp, Also Available in 0.5 hp, 1 hp, 1.5 hp, 3 hp, 5 hp, 6.5 hp, 7.5 hp, 10 hp
• Motor Phase: Three Phase
• Power Source: Electric

Our range of Two & Three wheeler oil pumps and oil pump assembly are carefully manufactured and thoroughly tested, in order to prevent any leakage or over heating of the engine. These components not only prevent accidental damage but if properly maintained, also enhance the efficiency of the vehicle.   For more than two decades in the automotive industry, today we are a trusted name in the same discipline. Today, we manufacture aftermarket oil pumps for all major 2 & 3 wheeler manufacturing companies. We manufacture parts for Hero Honda, Yamaha, TVS, Bajaj Auto, Kinetic, Hero Motors, LML and others.

• Brand Name: Bon
• Application: Tractor
• Type: Massey Ferguson
• Place of Origin: India

Product Code : B4146 Brand Name : Bon Product Specification This Hydraulic Pump Plate With Bush & Screw MF-241 ( BIG )

• Application: Industrial

We provide our valuable clients Bronze Impeller with the premium quality bronze metal which are manufactured using the latest equipment, coupled with technically qualified personnel in the industry. Our in house production capacity allows us to produce Bronze Impeller in bulk and hence we can supply this at very competitive price with superior quality. Protech Engineers is leading manufacturers of Bronze Impeller. These self primimg impeller set are produced under our supervision of diligent team of an engineers to ensure the quality output. Bronze Impeller is produced under the fully automation system as we have CNC machine for each kind of our product. Our in house production capacity allow us to produce Bronze Impeller in bulk and hence we can supply this Bronze Impeller at very competitive price with promise of quality. We assure you high tensile strength and dimensional accuracy. Our years of experience has given us the market strength and good number of satisfied clients who have frequently purchase Bronze Impeller from us and still have promise to buy again from us due to our timely manner of product delivery system and quality that we provide for self primimg impeller set.