Leader Valves Dealers in Rajkot

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: Blue
• Number Of Way: 2way
• Brand Name: SE
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch
• Type: Accumulator, Eccentric, Lug, Wafer
• Technics: Gear Operated
• Power: Hydraulic, Manual, Solenoid
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• As Per API 609, BS 5155: As Per API 609, BS 5155
• Wafer Full / Semi Lug Type: API 598, ISO 5208
• 50 to 600 M.M.: CI, CS, WCB, 304, 316 etc...
• Nitrial, EPDM,Viton, PTFE etc...: S.G. Iron, WCB, CF8, CF8M etc...

• Valve Size: 2 Inch
• Material: Stainless Steel
• Usage/Application: Drip Irrigation
• Power: Hydraullic
• Media: Water
• Temperature Of Media: High Temperature

• Material: Cast Iron, Ductile Iron, Metal, Stainless Steel
• Technics: Gear Operated, Hard Sealing
• Power: Hydraulic, Manual, Solenoid
• Pressure: 1000 Kpa, 520 Kpa
• Structure: Double Half Shaft, Pinless, U Section
• Media: Air, Fuel, Gas, Powder/Solid, Water
• Port Size: 0.1mm - 5 Cm, 21cm - 50 Cm, 51cm - 60 Cm, 6cm - 20 Cm

• Brand Name: NOVA

we are proficient manufacturers and suppliers of 1 piece socket weld ends ball valves. These are fabricated using the best quality raw material, sourced from the market trusted vendors. We ensure that the valves offered by us must comply with the norms set in the industry and deliver lasting performance. Some of the key details of our products include:

• Valve Size: 5inch, 4inch, 3inch, 2inch, 1inch, 1/4inch, 1/2inch, Upto 48 inch
• Material: Stainless Steel, Metal, Carbon Steeel, Special c95800 duplex super duplex lg2 ci di
• Brand Name: OMVAL
• Connection Type: Wafer
• Pressure Rating: ANSI Class 125 - 600
• Spring Material: Inconel
• End Connection Standard: ASME B16.5
• OMVAL: OM
• Check valve: Dual plate check valve
• Non return valve: All material ci di cf8 cf8m
• C95800: Duplex supel duplex
• Wafer: Lug
• Double flange: 3 year warranty

Details :  Standard service is used up to 15,000psi and tested at 22,500psi  H2S service is used up to 10,000psi and tested at 15,000psi  Rugged Construction with Forged Alloy Steel Body  Reliable Performance at high working pressure  Bottom Entry design, Top Entry design, Easy Maintenance  Valve Parts are Interchangeable with most major designs  Suiteeable for variety of high pressure applications such as fracturing, cementing, acidizing and etc.  Each valve is serialized  MTR and Test Report are available at any time 

• Country of Origin: India
• Material: Cast Steel
• Certification: ISI Certified
• Usage: Water Fitting
• Packaging Type: Carton
• Brand Name: Elegant Export
• Type: Industrial Valves
• Temperature Pressure: High Temperature Pressure
• Condition: New
• Finishing: Coated
• Driving Mode: Manual
• Media: Water

• Disc Material: SGI, CF8, CF8M
• End Connection: Wafer - API 609 (CAT - A)
• Range: DN40 - DN300
• Suitable to: ASMI B16.5 150#, BS10 TABLE : E, F, H
• Pressure Range: PN10, PN16
• Leakage Class: 100% Tightness at fully differential pressure
• Standard: API 609, BS 5155, ISO 5211, API 598, ASME B16.5
• Body Material: Cast Iron, WCB, SS304, SS316
• Stem Material: SS 410, SS 304, SS 316
• Body Liner / Seat Material: NBR, EPDM
• Specialities: Bi-directional zero leakage butterfly valve. ISO Pad for mounting, Gear Operator /Actuator. Extremely small play between the stem and disc due to ‘Double D’ drive. Accurate dual stem sealing prevents leakage.

We manufacture ball valves.

• Material: Cast Iron
• Color: Black, Red
• Feature: Durable, Smooth Finish And Robust Design
• Brand Name: Sumo
• Size: 65 mm
• Feature: Double Air Vents
• Media: Water
• Connection End: Screwed End

• Material: Carbon Steeel
• Number Of Way: 2way
• Technics: Gear Operated
• Power: Hydraulic
• Pressure: 1000 Kpa
• Feature: Casting Approved, Durable

We are recognized as a pioneering Butterfly Valve Manufacturer, Exporter, and Supplier from Rajkot (Gujarat). Our Butterfly Valves come in different sizes and specifications to be fit for different applications. These Butterfly Valves are optimized to effectively convey different media within temperature range of -20°C+200°C. We provide these valves in good quality packaging material at reasonable price.

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISI Certified
• Usage: Industrial
• Color: Blue
• Type: Automatic
• Finishing: Polished

• Material: Stainless Steel
• Application: Gas Fitting
• Color: Sky Blue
• Automatic Grade: Automatic
• Pressure: High Pressure
• Number Of Way: 3way
• Type: Pressure Control Valves
• Pattern: Plain

We are the main supplier of this product.

• SIZE: 2" TO 20"
• CLASS: 150# / 300# / 400# / 600#
• END: WAFER TYPE / FLANGED
• STANDARD: API 6D / API 594
• FIRE SAFE: API 6FD
• MOC: WCB / CF 8 / CF 8M / CF3 / CF 3M / CN 7M
• OPERATION: NON RETURN VALVE

• Design & Manufacture: BS 5351 / API 6D/ANSI B16:34
• Body & Trim: Nace MR 01-75
• Casting Inspection: MSS SP-53, 55, 59, 94
• Testing: BS 6755 Part-I / API 598
• SW END: MSS SP-45 / API 6D

Ball valves shall have a spherical ball that moves in a plane perpendicular to the direction of flow. Full opening through ball valves shall have a circular bore in the spherical ball that allows a sphere to pass with a nominal size not less than ½" nominal diameter. Reduce opening through Ball valve shall have a semi circular bore in the spherical ball that allows a phere to pass with a nominal size not less than 10" nominal diameter, Unless otherwise specified by customer.Reduce opening valves with a non circular opening through the spherical ball shall be supplied with a minimum opening as agreed by customer. Pressure & Temperature Rating Valves manufactured by Reliable Valves shall be furnished in one of the following classes- PN 20 (class 150)- PN 50 (class 300)- PN 64 (class 400)- PN 100 (class 600)- PN 150 (class 900); - PN 250 (class 1500)- PN 420 (class 2500);Pressure-temperature rate is for above class rated valves shall be in accordance to ASME-B 16.34/EN 1092-1, Other than shall be determine for a material properties in accordance with the applicable design standard. Size Reliable Valves manufacture Ball valves for ½" to 60" Size   Design Features Anti-Static Device & Blowout ProofAnti-static device is formed through metal to metal contact, The stem is grounded against body and ball by separate anti-static spring to avoid from any electric spark. The blow out proof over size stem operate the valve safety even at high differential pressure. A bottom stem seal enabling replacement of gland packing even when valve may under pressure. Double Block & BleedSpring loaded floating seats maintain contact with the ball and provide tight shut off even at low pressure differential. Independent sealing of upstream and downstream sides facilitates draining of fluid from the body cavity, and thus the double block and bleed operation. Double Body SealingDouble seal combination of O-Ring and spiral wound gasket ensures perfect body joint sealing. Reliable Valves therefore meet or exceed the fugitive emission requirements across wide range of pressure and temperature applications. Valves are suitable for both above and underground installations. Multiple Stem SealingA triple sealing arrangement in stem area prevents leakage to atmosphere. It includes double sealing with O-rings and graphite seal at the top of stem housing. The blow out of proof stem enables positive stem retention. Sealant System & LubricantBall valve of size 6” & above shall be provided and emergency sealant injection system if required by customer. The lubricant & sealant fittings are located near seat area & at stem neck. The lubricant sealant entered via inject fitting & pass around the seat ring. The lubricant will lower the torque in valve & sealant will provide sealing for minor damage such as scratches on seal faces.Fire Safe DesignIn the event the fire soft insert gets burnt & spring loaded seats ensure metal to metal sealing.Corrosion Protection & PaintingAll castings are sand blasted & are subject to dewatering oil coats. Valves are thoroughly cleaned & primer coated with epoxy zinc phosphate primer, Followed by final coat of epoxy synthetic enamel applied in semi gloss finish.

• Packaging Type: Box
• Media: Water
• Pressure: High Pressure
• Connector Type: Flanged End
• Material: Mild Steel
• Finishing: Powder Coated
• Valve Size: 2 Inch

Delivering the best in class products, we ensure that the range is in compliance with the International Norms. We, along with our team members make all the payment procedures completely transparent that makes us a trustworthy name in the industry. Our Ball Valves are manufactured using high-grade material which renders durability, resistance against corrosion and high compressive strength.   

We are offering valves, fittings, strainers, all kind of ball valves (single pcs., two pcs., & three pcs. Design with screwed end as well as flange end asa 150#, 300# etc.) all types of gate valve, globe valve, butterfly valve, solenoid valve, 'y' type strainer. All types of fittings like tee, elbow, socket & couplings.

  All our offered range of product has been made using the best technology. This Lined Butterfly Valves is highly demanded in the market for their best quality and cost effectiveness

• Material: UPVC, CPVC < SWR
• Brand Name: Marcos

Ball Valves, SS valve spindle, ball valve stem

We are main supplier of this product.

Technical Data Design & Manufacturing STD: BS 5351, API 602, IS:9890 Testing & Inspection STD: API 598 BS : 5146 Face to Face: as per ANSI B 16.10 End connections: 16 Bar max (228 PSI) Temp. Rating: Screwed : (BSP, BSPT, NPT)

• silver: black

1.please mail us if you have requirement any industrial ball valves needl valve, globe valve, dish check, check valves, steam prap valve etc.

• Application: Isolation

We are offering ball valves.

Size: 15 mm to 250 mm, class: upto 800# trunion mounted as well as floating type designs avaiable along with 3.1 or 3.2 certification.

We can manufacture SWING CHECK VALVE castings sizing from 1" to 24" with pressure rating 150# to 2500# with maximum single pc weight of 600 kgpc As per the Indian & overseas standards with material grades as mentioned below- 1. CARBON STEEL - WCB,WCC 2. LOW TEMP APPLICATION STEEL - LCB,LCC, 3. ALLOY STEEL - WC6,WC9 4. STAINLESS STEEL -CF3,CF3M,CF8,CF8M,CN7M 5. MARTENSITIC STEEL - CA-15, CA6NM 6. NICKLE ALLOYS - HASTELLOY-BC,MONEL K-400500, INCONEL, 7. DUPLEX STEEL - GRADE 1A, 4A, 5A & 6A 8. HIGH CHROME IRON – BS:4844, GRADE 3D