M P Engineering Co. GIDC, Rajkot, Gujarat

  • Turbo Air Vantilator

    Turbo Air Vantilator

    Request for Price

    We are offering turbo air vantilator. Natural ventilator - preffered by eenergy auditors "air king" turbo air ventilator is a wind driven ventilators actuated by natural convection from inside the building assisted by the wind outside. It is a cost effective and efficient ventilator ideally suited to ventilate factiries, workshops, ware houses, schools, hostels, auditoriums and other buildings which require effective ventilation. Salient features wind powered roof mounted ventilators designed to withstand high wind speeds. rain water and bird proof, being made up of closely spaced profiled vanes. prevents down draft into the building allowing air entry through the side openings. effectively removes heat, fumes and dust. avoids condensation at the bottom of the roof. the turbine being preecisely balanced with low inertia, operates freely and smoothly without any vibration even at low wind speed. exhausts hot air due to stack effect even when thre is no wind. Installation does not require structural reinforcement.

    ...more
    Get Best Price
  • pumping heating unit

    pumping heating unit

    Request for Price

    Please note that with the help of pumping heating unit, you can supply heated oil with pump pressure . As per standard the fuel is supplied to the burner through pump with the pressure of 0.55 - 0.85 kg./cm. sq. ( 8 -12 PSI) Heavy furnace oil require preheating to bring down viscosity. You can save fuel consumption with this unit.

    ...more
    Get Best Price
  • Portable Dust Collecting Systems

    Portable Dust Collecting Systems

    Request for Price

    Material not passing through Blower. It can be supplied with a mechanical shaker or with Pulse Jet automatic cleaning. Dust collectors are useful for Foundries, Machine Shops, Chemicals, Pharmaceuticals, Foods, Textiles, Dyes, Paints & for control of any kind of dust creating points.

    ...more
    Get Best Price
  • Pneumatic Material Handling Systems

    Pneumatic Material Handling Systems

    Request for Price

    Salient Features Convey any type of materials (Powder/Granules) without any dusting in the working area. Convey material with no. of bends. Control the flow of Material System available as per your requirement with Negative/Positive pressure and anti-dusting system.   Applications Plastic Machinery and plant, Food and Spice Industries, Chemical Plants, Pharma Industries etc. or any other industry where you want to convey material without dusting in atmosphere.   For Offer send details as below : Density of Material to be convey. Conveying Rate/Hr. Horizontal/Vertical distance & No. of Bends.

    ...more
    Get Best Price
  • Pneumatic Conveying System

    Pneumatic Conveying System

    Request for Price

    We are offering pneumatic conveying system. To convey material without dust range : 20 kghr to 5,000 kghr salient features convey any type of materials (powdergranules) without any dusting in the working area. convey material with no. Of bends. control the flow of material system available as per your requirement with negativepositive pressure and anti-dusting system.

    ...more
    Get Best Price
  • Low Air Pressure Industrial Oil Burner

    Low Air Pressure Industrial Oil Burner

    Request for Price

    Low Air Pressure Burners are suitable for most classes of liquid fuels. They operate with a stream of high velocity air, at a specified pressure, for fuel atomization. The burners have good 'turn down' range and hence rate of fuel consumption can be adjusted through a great extent without affecting the quality of combustion. The flame can be set for short and thick flame or long and narrow flame. Due to the ease of operation of the burner, a semiskilled operator is enough to handle the same.   Constuctional Features The burner body is made of high grade alloy cast iron and is sturdy. The atomizer is stationary and could be easily dismantled for cleaning up the burner. Strict quality control is made at our factory, before the burners are of streamlined construction to reduce frictional losses.   Operation The fuel is to be supplied to the burner either by gravity or by a constant pressure pumping system, at a pressure of 0.55-0.85 kg./cm² (8-12 PSI). Air supply is to be provided by a blower at a pressure of 400-750 mm WG. If the fuel used is a thick oil, eg. Furnace oil, it has to be preheated to bring down its viscosity, to less than 100 Sacs Redwood No. 1, at the burner. When the ambient temperature is below 150C, an outflow heater has to be fitted in the oil service tank for uninterrupted fuel supply to the burner. It is important to filter the furnace oil through reliable coarse and fine oil filters, to ensure clean oil supply to the burner.The burner output is adjusted by rotating the wheel attached to the oil regulating valve. The length of flame is adjusted by operating the swilled flap valve for the airflow.   Applications Due to the superior design and performance, the burners are extensively used for Various types of oil Fired Furnaces for Glass, Bricks & Ceramics, Bakery ovens, Kilns and Galvanizing equipment, Varnish Pots, Tea Driers, Chemicals Plants, Rolling Mills, Foundry Ovens, Boilers etc.

    ...more
    Get Best Price
  • Industrial Vacuum Cleaner

    Industrial Vacuum Cleaner

    Request for Price

    We are offering industrial vacuum cleaner.

    Get Best Price
  • Cross Flow Fan

    Cross Flow Fan

    Request for Price

    We are offering cross flow fan. "air king" make cross flow fans (or tangential) wheels provide wide, uniform air delivery for high capacity, low profile applications - heating and ventilation, heat pumps, and room air conditioners. aluminum construction. optional ball or sleeve bearings

    ...more
    Get Best Price
  • Centrifugal Blower

    Centrifugal Blower

    Request for Price

    There has been a long felt need for high efficiency, trouble-free high speed Blowers and this has been achieve successfully with the introduction of our "AIR KING" Centrifugal SuctionFlow Blowers which have embodiment of special features like:- HIGH EFFICIENCY MORE AIR WITH LESS H.P. MOTOR DRIVE OR BELT DRIVE ANY DISCHARGE POSITION SMOOTH IN RUNNING NON OVERLOADING TYPE EASY IN OPERATION

    ...more
    Get Best Price
  • Axial Flow Fan

    Axial Flow Fan

    Request for Price

    "AIR KING" axial flow fans - Man coolers are designed for spot cooling for men, machines , materials or for Industrial ventilation, air conditioning and fumes exhaust. It has three types - Column mounting, Pedestal type, and Tubular type. These models have the specific features of swiveling and tilting arrangements to provide the close delivery with high velocity of Air. Motors : Standard AC TEFC motors suitable. Flame proof motors can be use.   Construction : The casing is fabricated from mild steel sheets fitted with flanges & strong wire guard ( optional ). The Impeller of fan is made of aluminum and Dynamically balanced.   Driving Types : Direct Motor Drive - Impeller & motor both housed inside the casing & Impeller directly mounted on motor shaft. Suitable up to 65°C. V- Belt Drive - The Impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outside of the casing and shaft is driven with V- belts. Suitable for 65°C. to 150°c.

    ...more
    Get Best Price
  • Air Handling Unit

    Air Handling Unit

    Request for Price

    Get Best Price
  • centrifugal suction

    centrifugal suction

    Request for Price

    Get Best Price
  • powder dispensing unit

    powder dispensing unit

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 1998
  • No. of Employees 50 - 100
  • Annual Turnover Below Rs. 0.5 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
M P Engineering Co. from Rajkot, Gujarat Established in 1998 is Retailer of Air Handling Unit, Axial Flow Fan, centrifugal suction, Cross Flow Fans, flow blowers, Oil Burner, Pneumatic System, powder dispensing unit, pumping heating unit, Centrifugal Blower.
Read More »

Contact Information

M P Engineering Co.

  • Mr. Preyash Panchigar
  • Plot No.: 5224, 5225/A, Phase IV, GIDC, Ramol Cross Road, Vatwa, Ahmedabad-382 445. (Guj.) INDIA, Rajkot, Gujarat

Find Popular Pneumatic Conveying System Dealers in Rajkot

top